Re: [PATCH v6 4/4] RDMA/mlx5: Support dma-buf based userspace memory region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 23, 2020 at 09:40:01AM -0700, Jianxin Xiong wrote:

> diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
> index b261797..3bc412b 100644
> +++ b/drivers/infiniband/hw/mlx5/mr.c
> @@ -1,5 +1,6 @@
>  /*
>   * Copyright (c) 2013-2015, Mellanox Technologies. All rights reserved.
> + * Copyright (c) 2020, Intel Corporation. All rights reserved.
>   *
>   * This software is available to you under a choice of one of two
>   * licenses.  You may choose to be licensed under the terms of the GNU
> @@ -36,6 +37,8 @@
>  #include <linux/debugfs.h>
>  #include <linux/export.h>
>  #include <linux/delay.h>
> +#include <linux/dma-buf.h>
> +#include <linux/dma-resv.h>
>  #include <rdma/ib_umem.h>
>  #include <rdma/ib_umem_odp.h>
>  #include <rdma/ib_verbs.h>
> @@ -1113,6 +1116,8 @@ int mlx5_ib_update_xlt(struct mlx5_ib_mr *mr, u64 idx, int npages,
>  		dma_sync_single_for_cpu(ddev, dma, size, DMA_TO_DEVICE);
>  		if (mr->umem->is_odp) {
>  			mlx5_odp_populate_xlt(xlt, idx, npages, mr, flags);
> +		} else if (mr->umem->is_dmabuf && (flags & MLX5_IB_UPD_XLT_ZAP)) {
> +			memset(xlt, 0, size);
>  		} else {
>  			__mlx5_ib_populate_pas(dev, mr->umem, page_shift, idx,
>  					       npages, xlt,
> @@ -1462,6 +1467,111 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
>  	return ERR_PTR(err);
>  }
>  
> +static void mlx5_ib_dmabuf_invalidate_cb(struct dma_buf_attachment *attach)
> +{
> +	struct ib_umem_dmabuf *umem_dmabuf = attach->importer_priv;
> +	struct mlx5_ib_mr *mr = umem_dmabuf->device_context;
> +
> +	mlx5_ib_update_xlt(mr, 0, mr->npages, PAGE_SHIFT, MLX5_IB_UPD_XLT_ZAP);
> +	ib_umem_dmabuf_unmap_pages(umem_dmabuf);
> +}
> +
> +static struct dma_buf_attach_ops mlx5_ib_dmabuf_attach_ops = {
> +	.allow_peer2peer = 1,
> +	.move_notify = mlx5_ib_dmabuf_invalidate_cb,
> +};
> +
> +struct ib_mr *mlx5_ib_reg_user_mr_dmabuf(struct ib_pd *pd, u64 offset,
> +					 u64 length, u64 virt_addr,
> +					 int fd, int access_flags,
> +					 struct ib_udata *udata)
> +{
> +	struct mlx5_ib_dev *dev = to_mdev(pd->device);
> +	struct mlx5_ib_mr *mr = NULL;
> +	struct ib_umem *umem;
> +	struct ib_umem_dmabuf *umem_dmabuf;
> +	int npages;
> +	int order;
> +	int err;
> +
> +	if (!IS_ENABLED(CONFIG_INFINIBAND_USER_MEM))
> +		return ERR_PTR(-EOPNOTSUPP);
> +
> +	mlx5_ib_dbg(dev,
> +		    "offset 0x%llx, virt_addr 0x%llx, length 0x%llx, fd %d, access_flags 0x%x\n",
> +		    offset, virt_addr, length, fd, access_flags);
> +
> +	if (!mlx5_ib_can_load_pas_with_umr(dev, length))
> +		return ERR_PTR(-EINVAL);
> +
> +	umem = ib_umem_dmabuf_get(&dev->ib_dev, offset, length, fd, access_flags,
> +				  &mlx5_ib_dmabuf_attach_ops);
> +	if (IS_ERR(umem)) {
> +		mlx5_ib_dbg(dev, "umem get failed (%ld)\n", PTR_ERR(umem));
> +		return ERR_PTR(PTR_ERR(umem));
> +	}
> +
> +	npages = ib_umem_num_pages(umem);
> +	if (!npages) {

ib_umem_get should reject invalid umems like this

> +		mlx5_ib_warn(dev, "avoid zero region\n");
> +		ib_umem_release(umem);
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	order = ilog2(roundup_pow_of_two(npages));

Must always call ib_umem_find_best_pgsz(), specify PAGE_SIZE as the
argument for this scenario

> +	mlx5_ib_dbg(dev, "npages %d, ncont %d, order %d, page_shift %d\n",
> +		    npages, npages, order, PAGE_SHIFT);
> +
> +	mr = alloc_mr_from_cache(pd, umem, virt_addr, length, npages,
> +				 PAGE_SHIFT, order, access_flags);
> +	if (IS_ERR(mr))
> +		mr = NULL;
> +
> +	if (!mr) {
> +		mutex_lock(&dev->slow_path_mutex);
> +		mr = reg_create(NULL, pd, virt_addr, length, umem, npages,
> +				PAGE_SHIFT, access_flags, false);
> +		mutex_unlock(&dev->slow_path_mutex);
> +	}

Rebase on the mlx5 series just posted and use their version of this
code sequence, this is just not quite right


> +	err = mlx5_ib_update_xlt(mr, 0, mr->npages, PAGE_SHIFT,
> +				 MLX5_IB_UPD_XLT_ENABLE | MLX5_IB_UPD_XLT_ZAP);
> +
> +	if (err) {
> +		dereg_mr(dev, mr);
> +		return ERR_PTR(err);
> +	}

The current mlx5 code preloads the buffer with the right data, zapping
is fairly expensive, mapping and loading is the same cost

> @@ -1536,7 +1646,7 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *ib_mr, int flags, u64 start,
>  	if (!mr->umem)
>  		return -EINVAL;
>  
> -	if (is_odp_mr(mr))
> +	if (is_odp_mr(mr) || is_dmabuf_mr(mr))
>  		return -EOPNOTSUPP;
>  
>  	if (flags & IB_MR_REREG_TRANS) {
> @@ -1695,7 +1805,7 @@ static void dereg_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr)
>  	struct ib_umem *umem = mr->umem;
>  
>  	/* Stop all DMA */
> -	if (is_odp_mr(mr))
> +	if (is_odp_mr(mr) || is_dmabuf_mr(mr))
>  		mlx5_ib_fence_odp_mr(mr);

Make a dma buf specific function

I have another series touching this area too, but I think 

> @@ -801,6 +816,52 @@ static int pagefault_implicit_mr(struct mlx5_ib_mr *imr,
>   * Returns:
>   *  -EFAULT: The io_virt->bcnt is not within the MR, it covers pages that are
>   *           not accessible, or the MR is no longer valid.
> + *  -EAGAIN: The operation should be retried
> + *
> + *  >0: Number of pages mapped
> + */
> +static int pagefault_dmabuf_mr(struct mlx5_ib_mr *mr, struct ib_umem *umem,
> +			       u64 io_virt, size_t bcnt, u32 *bytes_mapped,
> +			       u32 flags)
> +{
> +	struct ib_umem_dmabuf *umem_dmabuf = to_ib_umem_dmabuf(umem);
> +	u64 user_va;
> +	u64 end;
> +	int npages;
> +	int err;
> +
> +	if (unlikely(io_virt < mr->mmkey.iova))
> +		return -EFAULT;
> +	if (check_add_overflow(io_virt - mr->mmkey.iova,
> +			       (u64)umem->address, &user_va))
> +		return -EFAULT;
> +	/* Overflow has alreddy been checked at the umem creation time */
> +	end = umem->address + umem->length;
> +	if (unlikely(user_va >= end || end  - user_va < bcnt))
> +		return -EFAULT;

Why duplicate this sequence? Caller does it

> @@ -811,6 +872,10 @@ static int pagefault_mr(struct mlx5_ib_mr *mr, u64 io_virt, size_t bcnt,
>  {
>  	struct ib_umem_odp *odp = to_ib_umem_odp(mr->umem);
>  
> +	if (is_dmabuf_mr(mr))
> +		return pagefault_dmabuf_mr(mr, mr->umem, io_virt, bcnt,
> +					   bytes_mapped, flags);
> +
>  	lockdep_assert_held(&mr->dev->odp_srcu);
>  	if (unlikely(io_virt < mr->mmkey.iova))
>  		return -EFAULT;
> @@ -1747,7 +1812,6 @@ static void destroy_prefetch_work(struct prefetch_mr_work *work)
>  {
>  	struct mlx5_ib_dev *dev = to_mdev(pd->device);
>  	struct mlx5_core_mkey *mmkey;
> -	struct ib_umem_odp *odp;
>  	struct mlx5_ib_mr *mr;
>  
>  	lockdep_assert_held(&dev->odp_srcu);
> @@ -1761,11 +1825,9 @@ static void destroy_prefetch_work(struct prefetch_mr_work *work)
>  	if (mr->ibmr.pd != pd)
>  		return NULL;
>  
> -	odp = to_ib_umem_odp(mr->umem);
> -
>  	/* prefetch with write-access must be supported by the MR */
>  	if (advice == IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH_WRITE &&
> -	    !odp->umem.writable)
> +	    !mr->umem->writable)

??

This does look basically right though. I think a little more polishing
and it can be merged. It does need to go after the mlx5 MR series
though..

Jason



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux