QP1 Rx CQE reports transparent VLAN ID in the completion
and this is used while reporting the completion for received
MAD packet. Check if the vlan id is configured before reporting
it in the work completion.
Fixes: 84511455ac5b ("RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion")
Signed-off-by: Selvin Xavier <selvin.xavier@xxxxxxxxxxxx>
---
drivers/infiniband/hw/bnxt_re/ib_verbs.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index 2f5aac0..0c5fb79 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -3264,6 +3264,20 @@ static void bnxt_re_process_res_rawqp1_wc(struct ib_wc *wc,
wc->wc_flags |= IB_WC_GRH;
}
+static bool bnxt_re_check_if_vlan_valid(struct bnxt_re_dev *rdev,
+ u16 vlan_id)
+{
+ /*
+ * Check if the vlan is configured in the host.
+ * If not configured, it can be a transparent
+ * VLAN. So dont report the vlan id.
+ */
+ if (!__vlan_find_dev_deep_rcu(rdev->netdev,
+ htons(ETH_P_8021Q), vlan_id))
+ return false;
+ return true;
+}
+
static bool bnxt_re_is_vlan_pkt(struct bnxt_qplib_cqe *orig_cqe,
u16 *vid, u8 *sl)
{
@@ -3332,9 +3346,11 @@ static void bnxt_re_process_res_shadow_qp_wc(struct bnxt_re_qp *gsi_sqp,
wc->src_qp = orig_cqe->src_qp;
memcpy(wc->smac, orig_cqe->smac, ETH_ALEN);
if (bnxt_re_is_vlan_pkt(orig_cqe, &vlan_id, &sl)) {
- wc->vlan_id = vlan_id;
- wc->sl = sl;
- wc->wc_flags |= IB_WC_WITH_VLAN;
+ if (bnxt_re_check_if_vlan_valid(rdev, vlan_id)) {
+ wc->vlan_id = vlan_id;
+ wc->sl = sl;
+ wc->wc_flags |= IB_WC_WITH_VLAN;
+ }
}
wc->port_num = 1;
wc->vendor_err = orig_cqe->status;
--
2.5.5
