On Fri, May 22, 2020 at 10:33:20AM -0500, Pierre-Louis Bossart wrote: > > Maybe not great, but at least it is consistent with all the lifetime > > models and the operation of the driver core. > > I agree your comments are valid ones, I just don't have a solution to be > fully compliant with these models and report failures of the driver probe > for a child device due to configuration issues (bad audio topology, etc). > My understanding is that errors on probe are explicitly not handled in the > driver core, see e.g. comments such as: Yes, but that doesn't really apply here... > /* > * Ignore errors returned by ->probe so that the next driver can try > * its luck. > */ > https://elixir.bootlin.com/linux/latest/source/drivers/base/dd.c#L636 > > If somehow we could request the error to be reported then probably we > wouldn't need this complete/wait_for_completion mechanism as a custom > notification. That is the same issue as the completion, a driver should not be making assumptions about ordering like this. For instance what if the current driver is in the initrd and the 2nd driver is in a module in the filesystem? It will not probe until the system boots more completely. This is all stuff that is supposed to work properly. > Not at the moment, no. there are no failures reported in dmesg, and > the user does not see any card created. This is a silent error. Creating a partial non-function card until all the parts are loaded seems like the right way to surface an error like this. Or don't break the driver up in this manner if all the parts are really required just for it to function - quite strange place to get into. What happens if the user unplugs this sub driver once things start running? Jason
