Re: [PATCH for-next 3/5] RDMA/hns: Optimize the wr opcode conversion from ib to hns

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 05, 2020 at 09:24:53AM -0400, Jason Gunthorpe wrote:
> On Thu, Mar 05, 2020 at 08:18:39AM +0200, Leon Romanovsky wrote:
> > On Mon, Mar 02, 2020 at 08:11:31PM +0800, Weihang Li wrote:
> > > From: Xi Wang <wangxi11@xxxxxxxxxx>
> > >
> > > Simplify the wr opcode conversion from ib to hns by using a map table
> > > instead of the switch-case statement.
> > >
> > > Signed-off-by: Xi Wang <wangxi11@xxxxxxxxxx>
> > > Signed-off-by: Weihang Li <liweihang@xxxxxxxxxx>
> > >  drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 70 ++++++++++++++++++------------
> > >  1 file changed, 43 insertions(+), 27 deletions(-)
> > >
> > > diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
> > > index c8c345f..ea61ccb 100644
> > > +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
> > > @@ -56,6 +56,47 @@ static void set_data_seg_v2(struct hns_roce_v2_wqe_data_seg *dseg,
> > >  	dseg->len  = cpu_to_le32(sg->length);
> > >  }
> > >
> > > +/*
> > > + * mapped-value = 1 + real-value
> > > + * The hns wr opcode real value is start from 0, In order to distinguish between
> > > + * initialized and uninitialized map values, we plus 1 to the actual value when
> > > + * defining the mapping, so that the validity can be identified by checking the
> > > + * mapped value is greater than 0.
> > > + */
> > > +#define HR_OPC_MAP(ib_key, hr_key) \
> > > +		[IB_WR_ ## ib_key] = 1 + HNS_ROCE_V2_WQE_OP_ ## hr_key
> > > +
> > > +static const u32 hns_roce_op_code[] = {
> > > +	HR_OPC_MAP(RDMA_WRITE,			RDMA_WRITE),
> > > +	HR_OPC_MAP(RDMA_WRITE_WITH_IMM,		RDMA_WRITE_WITH_IMM),
> > > +	HR_OPC_MAP(SEND,			SEND),
> > > +	HR_OPC_MAP(SEND_WITH_IMM,		SEND_WITH_IMM),
> > > +	HR_OPC_MAP(RDMA_READ,			RDMA_READ),
> > > +	HR_OPC_MAP(ATOMIC_CMP_AND_SWP,		ATOM_CMP_AND_SWAP),
> > > +	HR_OPC_MAP(ATOMIC_FETCH_AND_ADD,	ATOM_FETCH_AND_ADD),
> > > +	HR_OPC_MAP(SEND_WITH_INV,		SEND_WITH_INV),
> > > +	HR_OPC_MAP(LOCAL_INV,			LOCAL_INV),
> > > +	HR_OPC_MAP(MASKED_ATOMIC_CMP_AND_SWP,	ATOM_MSK_CMP_AND_SWAP),
> > > +	HR_OPC_MAP(MASKED_ATOMIC_FETCH_AND_ADD,	ATOM_MSK_FETCH_AND_ADD),
> > > +	HR_OPC_MAP(REG_MR,			FAST_REG_PMR),
> > > +	[IB_WR_RESERVED1] = 0,
> >
> > hns_roce_op_code[] is declared as static, everything is initialized to
> > 0, there is no need to set 0 again.
>
> It is needed to guarentee the size of the array.

Not really, it depends on their implementation of to_hr_opcode().

>
> > > +};
> > > +
> > > +static inline u32 to_hr_opcode(u32 ib_opcode)
> >
> > No inline functions in *.c, please.
>
> Did you see CH say this is not such a strong rule apparently?

Yes, he talked about container_of which makes sense.

>
> Jason



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux