Re: [PATCH for-rc] RDMA/core: Fix additional panic in get_pkey_idx_qp_list()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 25, 2020 at 08:31:51AM -0500, Mike Marciniszyn wrote:
> When an hfi1 card is booted and the part is brought active
> a panic will result when the following commands
> are entered after ipoib has come up:
>
> ifdown ib0 && ifup ib0
>
> Here is the panic:
>
> [  208.521731] RIP: 0010:get_pkey_idx_qp_list+0x50/0x80 [ib_core]
> [  208.528249] Code: c7 18 e8 13 04 30 ef 0f b6 43 06 48 69 c0 b8 00 00 00 48 03 85 a0 04 00 00 48 8b 50 20 48 8d 48 20 48 39 ca 74 1a 0f b7 73 04 <66> 39 72 10 75 08 eb 10 66 39 72 10 74 0a 48 8b 12 48 39 ca 75 f2
> [  208.549257] RSP: 0018:ffffafb3480932f0 EFLAGS: 00010203
> [  208.555114] RAX: ffff98059ababa10 RBX: ffff980d926e8cc0 RCX: ffff98059ababa30
> [  208.563108] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff98059ababa28
> [  208.571112] RBP: ffff98059b940000 R08: 00000000000310c0 R09: ffff97fe47c07480
> [  208.579117] R10: 0000000000000036 R11: 0000000000000200 R12: 0000000000000071
> [  208.587115] R13: ffff98059b940000 R14: ffff980d87f948a0 R15: 0000000000000000
> [  208.595100] FS:  00007f88deb31740(0000) GS:ffff98059f600000(0000) knlGS:0000000000000000
> [  208.604151] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  208.610575] CR2: 0000000000000010 CR3: 0000000853e26001 CR4: 00000000001606e0
> [  208.618554] Call Trace:
> [  208.621301]  port_pkey_list_insert+0x3d/0x1b0 [ib_core]
> [  208.627142]  ? kmem_cache_alloc_trace+0x215/0x220
> [  208.632994]  ib_security_modify_qp+0x226/0x3a0 [ib_core]
> [  208.639606]  _ib_modify_qp+0xcf/0x390 [ib_core]
> [  208.645250]  ipoib_init_qp+0x7f/0x200 [ib_ipoib]
> [  208.650931]  ? rvt_modify_port+0xd0/0xd0 [rdmavt]
> [  208.656755]  ? ib_find_pkey+0x99/0xf0 [ib_core]
> [  208.662403]  ipoib_ib_dev_open_default+0x1a/0x200 [ib_ipoib]
> [  208.669279]  ipoib_ib_dev_open+0x96/0x130 [ib_ipoib]
> [  208.675429]  ipoib_open+0x44/0x130 [ib_ipoib]
> [  208.680833]  __dev_open+0xd1/0x160
> [  208.685163]  __dev_change_flags+0x1ab/0x1f0
> [  208.690435]  dev_change_flags+0x23/0x60
> [  208.695281]  do_setlink+0x328/0xe30
> [  208.699733]  ? __nla_validate_parse+0x54/0x900
> [  208.705269]  __rtnl_newlink+0x54e/0x810
> [  208.710117]  ? __alloc_pages_nodemask+0x17d/0x320
> [  208.715899]  ? page_fault+0x30/0x50
> [  208.720392]  ? _cond_resched+0x15/0x30
> [  208.725158]  ? kmem_cache_alloc_trace+0x1c8/0x220
> [  208.730931]  rtnl_newlink+0x43/0x60
> [  208.735444]  rtnetlink_rcv_msg+0x28f/0x350
> [  208.740599]  ? kmem_cache_alloc+0x1fb/0x200
> [  208.745810]  ? _cond_resched+0x15/0x30
> [  208.750605]  ? __kmalloc_node_track_caller+0x24d/0x2d0
> [  208.756854]  ? rtnl_calcit.isra.31+0x120/0x120
> [  208.762425]  netlink_rcv_skb+0xcb/0x100
> [  208.767307]  netlink_unicast+0x1e0/0x340
> [  208.772242]  netlink_sendmsg+0x317/0x480
> [  208.777121]  ? __check_object_size+0x48/0x1d0
> [  208.782545]  sock_sendmsg+0x65/0x80
> [  208.786915]  ____sys_sendmsg+0x223/0x260
> [  208.791776]  ? copy_msghdr_from_user+0xdc/0x140
> [  208.797378]  ___sys_sendmsg+0x7c/0xc0
> [  208.801921]  ? skb_dequeue+0x57/0x70
> [  208.806430]  ? __inode_wait_for_writeback+0x75/0xe0
> [  208.812383]  ? fsnotify_grab_connector+0x45/0x80
> [  208.817950]  ? __dentry_kill+0x12c/0x180
> [  208.822734]  __sys_sendmsg+0x58/0xa0
> [  208.827180]  do_syscall_64+0x5b/0x200
> [  208.831671]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
> [  208.837707] RIP: 0033:0x7f88de467f10
>
> A bisect points to the commit noted below.
>
> Some prints show that when ib0 first comes up and qp_attr_mask of 0x51
> results in a new pp with a 0 port_num:
>
> [ 149.207404] qp_attr_mask 51 qp_attr->port_num 1 qp->attr->pkey_index 0
> [ 149.215522] qp_pps ffff8d745be33180 qp_pps->main.state 2 qp_pps->main.port_num 1
> [ 149.224616] new pp ffff8d745be33120 state 0 port_num 0 pkey_index 0
>
> For an qp_attr_mask of 0x51, the code never copies the port from
> qp_pps, leaving the port at 0, which eventually leads to the panic.
> The state is also also left at 0 or IB_PORT_PKEY_NOT_VALID.
>
> Later when the ibdown/ifup is executed the port_num 0 shows up in qp_pps
> at ffff8d745be33120 leading to the panic.
>
> [  198.223296] qp_attr_mask 71 qp_attr->port_num 1 qp->attr->pkey_index 0
> [  198.230608] qp_pps ffff8d745be33120 qp_pps->main.state 0 qp_pps->main.port_num 0
> [  198.238887] new pp ffff8d6c5f412d80 state 1 port_num 0 pkey_index 0
> [  198.245900] pp ffff8d6c5f412d80 pp->port_num 0 pp->pkey_index 0
> [  198.254005] BUG: kernel NULL pointer dereference, address: 0000000000000010
>
> Fix by adjusting the else clause to insure that the port_num and state
> are copied when there is a qp_pps.
>
> Reviewed-by: Kaike Wan <kaike.wan@xxxxxxxxx>
> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@xxxxxxxxx>
> Fixes: 1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list")
> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@xxxxxxxxx>
> ---
>  drivers/infiniband/core/security.c |    3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/infiniband/core/security.c b/drivers/infiniband/core/security.c
> index 2b4d803..f2c7fbd 100644
> --- a/drivers/infiniband/core/security.c
> +++ b/drivers/infiniband/core/security.c
> @@ -347,8 +347,7 @@ static struct ib_ports_pkeys *get_new_pps(const struct ib_qp *qp,
>  						      qp_attr->pkey_index;
>  	if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT))
>  		new_pps->main.state = IB_PORT_PKEY_VALID;
> -
> -	if (!(qp_attr_mask & (IB_QP_PKEY_INDEX || IB_QP_PORT)) && qp_pps) {
> +	else if (qp_pps) {
>  		new_pps->main.port_num = qp_pps->main.port_num;

I afraid that this patch is incorrect, if IB_QP_PORT or IB_QP_PKEY_INDEX set,
we will perform needed assignment:

342         if (qp_attr_mask & IB_QP_PORT)
343                 new_pps->main.port_num =
344                         (qp_pps) ? qp_pps->main.port_num : qp_attr->port_num;
345         if (qp_attr_mask & IB_QP_PKEY_INDEX)
346                 new_pps->main.pkey_index = (qp_pps) ? qp_pps->main.pkey_index :

So in your code, you will or overwrite already set fields or perform
assignment if both IB_QP_* not set, while in original code this
"else if (qp_pps)" will be taken if both IB_QP_PORT and IB_QP_PKEY_INDEX
are not set.

Can you please give a shot for Maor's version?

Thanks

>  		new_pps->main.pkey_index = qp_pps->main.pkey_index;
>  		if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID)
>



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux