This series aims at providing support for Raspberry Pi 4's PCIe controller, which is also shared with the Broadcom STB family of devices. There was a previous attempt to upstream this some years ago[1] but was blocked as most STB PCIe integrations have a sparse DMA mapping[2] which is something currently not supported by the kernel. Luckily this is not the case for the Raspberry Pi 4. Note that the driver code is to be based on top of Rob Herring's series simplifying inbound and outbound range parsing. [1] https://patchwork.kernel.org/cover/10605933/ [2] https://patchwork.kernel.org/patch/10605957/ --- Changes since v1: - add generic rounddown/roundup_pow_two64() patch - Add MAINTAINERS patch - Fix Kconfig - Cleanup probe, use up to date APIs, exit on MSI failure - Get rid of linux,pci-domain and other unused constructs - Use edge triggered setup for MSI - Cleanup MSI implementation - Fix multiple cosmetic issues - Remove supend/resume code Jim Quinlan (3): dt-bindings: PCI: Add bindings for brcmstb's PCIe device PCI: brcmstb: add Broadcom STB PCIe host controller driver PCI: brcmstb: add MSI capability Nicolas Saenz Julienne (3): linux/log2.h: Add roundup/rounddown_pow_two64() family of functions ARM: dts: bcm2711: Enable PCIe controller MAINTAINERS: Add brcmstb PCIe controller .../bindings/pci/brcm,stb-pcie.yaml | 110 ++ MAINTAINERS | 4 + arch/arm/boot/dts/bcm2711.dtsi | 46 + drivers/net/ethernet/mellanox/mlx4/en_clock.c | 3 +- drivers/pci/controller/Kconfig | 9 + drivers/pci/controller/Makefile | 1 + drivers/pci/controller/pcie-brcmstb.c | 1179 +++++++++++++++++ drivers/pci/controller/pcie-cadence-ep.c | 7 +- drivers/pci/controller/pcie-cadence.c | 7 +- drivers/pci/controller/pcie-rockchip-ep.c | 9 +- include/linux/log2.h | 52 + kernel/dma/direct.c | 3 +- 12 files changed, 1412 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml create mode 100644 drivers/pci/controller/pcie-brcmstb.c -- 2.24.0
