On Wed, 17 Jul 2019 17:31:49 +0300 Leon Romanovsky <leon@xxxxxxxxxx> wrote: > From: Leon Romanovsky <leonro@xxxxxxxxxxxx> > > Changelog v0->v1: > * Fixed typo in manual page (Gal) > * Rebased on top of d035cc1b "ip tunnel: warn when changing IPv6 tunnel without tunnel name" > * Dropped update header file because it was already merged. > > --------------------------------------------------------------------------------------- > > Hi, > > This is supplementary part of accepted to rdma-next kernel series, > that kernel series provided an option to get various counters: global > and per-objects. > > Currently, all counters are printed in format similar to other > device/link properties, while "-p" option will print them in table like > format. > > [leonro@server ~]$ rdma stat show > link mlx5_0/1 rx_write_requests 0 rx_read_requests 0 rx_atomic_requests > 0 out_of_buffer 0 duplicate_request 0 rnr_nak_retry_err 0 packet_seq_err > 0 implied_nak_seq_err 0 local_ack_timeout_err 0 resp_local_length_error > 0 resp_cqe_error 0 req_cqe_error 0 req_remote_invalid_request 0 > req_remote_access_errors 0 resp_remote_access_errors 0 > resp_cqe_flush_error 0 req_cqe_flush_error 0 rp_cnp_ignored 0 > rp_cnp_handled 0 np_ecn_marked_roce_packets 0 np_cnp_sent 0 > > [leonro@server ~]$ rdma stat show -p > link mlx5_0/1 > rx_write_requests 0 > rx_read_requests 0 > rx_atomic_requests 0 > out_of_buffer 0 > duplicate_request 0 > rnr_nak_retry_err 0 > packet_seq_err 0 > implied_nak_seq_err 0 > local_ack_timeout_err 0 > resp_local_length_error 0 > resp_cqe_error 0 > req_cqe_error 0 > req_remote_invalid_request 0 > req_remote_access_errors 0 > resp_remote_access_errors 0 > resp_cqe_flush_error 0 > req_cqe_flush_error 0 > rp_cnp_ignored 0 > rp_cnp_handled 0 > np_ecn_marked_roce_packets 0 > np_cnp_sent 0 > > Thanks > > Mark Zhang (7): > rdma: Add "stat qp show" support > rdma: Add get per-port counter mode support > rdma: Add rdma statistic counter per-port auto mode support > rdma: Make get_port_from_argv() returns valid port in strict port mode > rdma: Add stat manual mode support > rdma: Add default counter show support > rdma: Document counter statistic > > man/man8/rdma-dev.8 | 1 + > man/man8/rdma-link.8 | 1 + > man/man8/rdma-resource.8 | 1 + > man/man8/rdma-statistic.8 | 167 +++++++++ > man/man8/rdma.8 | 7 +- > rdma/Makefile | 2 +- > rdma/rdma.c | 3 +- > rdma/rdma.h | 1 + > rdma/stat.c | 759 ++++++++++++++++++++++++++++++++++++++ > rdma/utils.c | 17 +- > 10 files changed, 954 insertions(+), 5 deletions(-) > create mode 100644 man/man8/rdma-statistic.8 > create mode 100644 rdma/stat.c > > -- > 2.20.1 > Applied now, thanks
