Re: [RFC PATCH 00/28] Removing struct page from P2PDMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2019-06-28 7:38 a.m., Christoph Hellwig wrote:
> On Thu, Jun 27, 2019 at 12:00:35PM -0600, Logan Gunthorpe wrote:
>>> It is not.  (c) is fundamentally very different as it is not actually
>>> an operation that ever goes out to the wire at all, and which is why the
>>> actual physical address on the wire does not matter at all.
>>> Some interfaces like NVMe have designed it in a way that it the commands
>>> used to do this internal transfer look like (b2), but that is just their
>>> (IMHO very questionable) interface design choice, that produces a whole
>>> chain of problems.
>>
>> >From the mapping device's driver's perspective yes, but from the
>> perspective of a submitting driver they would be the same.
> 
> With your dma_addr_t scheme it won't be the same, as you'd need
> a magic way to generate the internal addressing and stuff it into
> the dma_addr_t.  With a phys_addr_t based scheme they should basically
> be all the same.

Yes, I see the folly in the dma_addr_t scheme now. I like the
phys_addr_t ideas we have been discussing.

>> Yes, you did suggest them. But what I'm trying to suggest is we don't
>> *necessarily* need the lookup. For demonstration purposes only, a
>> submitting driver could very roughly potentially do:
>>
>> struct bio_vec vec;
>> dist = pci_p2pdma_dist(provider_pdev, mapping_pdev);
>> if (dist < 0) {
>>      /* use regular memory */
>>      vec.bv_addr = virt_to_phys(kmalloc(...));
>>      vec.bv_flags = 0;
>> } else if (dist & PCI_P2PDMA_THRU_HOST_BRIDGE) {
>>      vec.bv_addr = pci_p2pmem_alloc_phys(provider_pdev, ...);
>>      vec.bv_flags = BVEC_MAP_RESOURCE;
>> } else {
>>      vec.bv_addr = pci_p2pmem_alloc_bus_addr(provider_pdev, ...);
>>      vec.bv_flags = BVEC_MAP_BUS_ADDR;
>> }
> 
> That doesn't look too bad, except..
> 
>> -- And a mapping driver would roughly just do:
>>
>> dma_addr_t dma_addr;
>> if (vec.bv_flags & BVEC_MAP_BUS_ADDR) {
>>      if (pci_bus_addr_in_bar(mapping_pdev, vec.bv_addr, &bar, &off))  {
>>           /* case (c) */
>>           /* program the DMA engine with bar and off */
> 
> Why bother with that here if we could also let the caller handle
> that? pci_p2pdma_dist() should be able to trivially find that out
> based on provider_dev == mapping_dev.

True, in fact pci_p2pdma_dist() should return 0 in that case.

Though the driver will still have to do a range compare to figure out
which BAR the address belongs to and find the offset.

>> The real difficulty here is that you'd really want all the above handled
>> by a dma_map_bvec() so it can combine every vector hitting the IOMMU
>> into a single continuous IOVA -- but it's hard to fit case (c) into that
>> equation. So it might be that a dma_map_bvec() handles cases (a), (b1)
>> and (b2) and the mapping driver has to then check each resulting DMA
>> vector for pci_bus_addr_in_bar() while it is programming the DMA engine
>> to deal with case (c).
> 
> I'd do it the other way around.  pci_p2pdma_dist is used to find
> the p2p type.  The p2p type is stuff into the bio_vec, and we then:
> 
>  (1) manually check for case (c) in driver for drivers that want to
>      treat it different from (b)
>  (2) we then have a dma mapping wrapper that checks the p2p type
>      and does the right thing for the rest.

Sure, that could make sense.

I imagine there's a lot of details that are wrong or could be done
better in my example. The purpose of it was just to demonstrate that we
can do it without a lookup in an interval tree on the physical address.

Logan




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux