On Mon, Apr 22, 2019 at 09:00:34AM +0300, Leon Romanovsky wrote: > On Fri, Apr 19, 2019 at 01:16:06PM +0200, Hannes Reinecke wrote: > > On 4/15/19 12:35 PM, Yuval Shaia wrote: > > > On Thu, Apr 11, 2019 at 07:02:15PM +0200, Cornelia Huck wrote: > > > > On Thu, 11 Apr 2019 14:01:54 +0300 > > > > Yuval Shaia <yuval.shaia@xxxxxxxxxx> wrote: > > > > > > > > > Data center backends use more and more RDMA or RoCE devices and more and > > > > > more software runs in virtualized environment. > > > > > There is a need for a standard to enable RDMA/RoCE on Virtual Machines. > > > > > > > > > > Virtio is the optimal solution since is the de-facto para-virtualizaton > > > > > technology and also because the Virtio specification > > > > > allows Hardware Vendors to support Virtio protocol natively in order to > > > > > achieve bare metal performance. > > > > > > > > > > This RFC is an effort to addresses challenges in defining the RDMA/RoCE > > > > > Virtio Specification and a look forward on possible implementation > > > > > techniques. > > > > > > > > > > Open issues/Todo list: > > > > > List is huge, this is only start point of the project. > > > > > Anyway, here is one example of item in the list: > > > > > - Multi VirtQ: Every QP has two rings and every CQ has one. This means that > > > > > in order to support for example 32K QPs we will need 64K VirtQ. Not sure > > > > > that this is reasonable so one option is to have one for all and > > > > > multiplex the traffic on it. This is not good approach as by design it > > > > > introducing an optional starvation. Another approach would be multi > > > > > queues and round-robin (for example) between them. > > > > > > > Typically there will be a one-to-one mapping between QPs and CPUs (on the > > guest). So while one would need to be prepared to support quite some QPs, > > the expectation is that the actual number of QPs used will be rather low. > > In a similar vein, multiplexing QPs would be defeating the purpose, as the > > overall idea was to have _independent_ QPs to enhance parallelism. > > > > > > > Expectations from this posting: > > > > > In general, any comment is welcome, starting from hey, drop this as it is a > > > > > very bad idea, to yeah, go ahead, we really want it. > > > > > Idea here is that since it is not a minor effort i first want to know if > > > > > there is some sort interest in the community for such device. > > > > > > > > My first reaction is: Sounds sensible, but it would be good to have a > > > > spec for this :) > > > > > > > > You'll need a spec if you want this to go forward anyway, so at least a > > > > sketch would be good to answer questions such as how many virtqueues > > > > you use for which purpose, what is actually put on the virtqueues, > > > > whether there are negotiable features, and what the expectations for > > > > the device and the driver are. It also makes it easier to understand > > > > how this is supposed to work in practice. > > > > > > > > If folks agree that this sounds useful, the next step would be to > > > > reserve an id for the device type. > > > > > > Thanks for the tips, will sure do that, it is that first i wanted to make > > > sure there is a use case here. > > > > > > Waiting for any feedback from the community. > > > > > I really do like the ides; in fact, it saved me from coding a similar thing > > myself :-) > > > > However, I'm still curious about the overall intent of this driver. Where > > would the I/O be routed _to_ ? > > It's nice that we have a virtualized driver, but this driver is > > intended to do I/O (even if it doesn't _do_ any I/O ATM :-) > > And this I/O needs to be send to (and possibly received from) > > something. > > > > So what exactly is this something? > > An existing piece of HW on the host? > > If so, wouldn't it be more efficient to use vfio, either by using SR-IOV or > > by using virtio-mdev? > > > > Another guest? > > If so, how would we route the I/O from one guest to the other? > > Shared memory? Implementing a full-blown RDMA switch in qemu? > > > > Oh, and I would _love_ to have a discussion about this at KVM Forum. > > Maybe I'll manage to whip up guest-to-guest RDMA connection using ivshmem > > ... let's see. > > Following success in previous years to transfer ideas into code, > we started to prepare RDMA miniconference in LPC 2019, which will > be co-located with Kernel Summit and networking track. > > I'm confident that such broad audience of kernel developers > will be good fit for such discussion. Just posted a proposal for a talk at Linux Plumbers. > > Previous years: > 2016: https://www.spinics.net/lists/linux-rdma/msg43074.html > 2017: https://lwn.net/Articles/734163/ > 2018: It was so full in audience and intensive that I failed to > summarize it :( > > Thanks > > > > > Cheers, > > > > Hannes > > -- > > Dr. Hannes Reinecke Teamlead Storage & Networking > > hare@xxxxxxx +49 911 74053 688 > > SUSE LINUX GmbH, Maxfeldstr. 5, 90409 N??rnberg > > GF: Felix Imend??rffer, Mary Higgins, Sri Rasiah > > HRB 21284 (AG N??rnberg)
