From: Michael Guralnik <michaelgur@xxxxxxxxxxxx>
Currently, the firmware report of a connection width that
is not 1x, 4x, 8x or 12x will cause to driver failure during
initialization.
To prevent such failure after every time new width is introduced
to RDMA stack, we will set a default 4x width for unknown to driver
widths,
It is needed to allow to run old kernels with new firmware.
Cc: <stable@xxxxxxxxxxxxxxx> # 4.1
Fixes: 1b5daf11b015 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode")
Signed-off-by: Michael Guralnik <michaelgur@xxxxxxxxxxxx>
Reviewed-by: Majd Dibbiny <majd@xxxxxxxxxxxx>
Signed-off-by: Leon Romanovsky <leonro@xxxxxxxxxxxx>
---
drivers/infiniband/hw/mlx5/main.c | 29 +++++++++++------------------
1 file changed, 11 insertions(+), 18 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index e9c428071df3..3569fda07e07 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -1094,31 +1094,26 @@ enum mlx5_ib_width {
MLX5_IB_WIDTH_12X = 1 << 4
};
-static int translate_active_width(struct ib_device *ibdev, u8 active_width,
+static void translate_active_width(struct ib_device *ibdev, u8 active_width,
u8 *ib_width)
{
struct mlx5_ib_dev *dev = to_mdev(ibdev);
- int err = 0;
- if (active_width & MLX5_IB_WIDTH_1X) {
+ if (active_width & MLX5_IB_WIDTH_1X)
*ib_width = IB_WIDTH_1X;
- } else if (active_width & MLX5_IB_WIDTH_2X) {
- mlx5_ib_dbg(dev, "active_width %d is not supported by IB spec\n",
- (int)active_width);
- err = -EINVAL;
- } else if (active_width & MLX5_IB_WIDTH_4X) {
+ else if (active_width & MLX5_IB_WIDTH_4X)
*ib_width = IB_WIDTH_4X;
- } else if (active_width & MLX5_IB_WIDTH_8X) {
+ else if (active_width & MLX5_IB_WIDTH_8X)
*ib_width = IB_WIDTH_8X;
- } else if (active_width & MLX5_IB_WIDTH_12X) {
+ else if (active_width & MLX5_IB_WIDTH_12X)
*ib_width = IB_WIDTH_12X;
- } else {
- mlx5_ib_dbg(dev, "Invalid active_width %d\n",
+ else {
+ mlx5_ib_dbg(dev, "Invalid active_width %d, setting width to default value: 4x\n",
(int)active_width);
- err = -EINVAL;
+ *ib_width = IB_WIDTH_4X;
}
- return err;
+ return;
}
static int mlx5_mtu_to_ib_mtu(int mtu)
@@ -1225,10 +1220,8 @@ static int mlx5_query_hca_port(struct ib_device *ibdev, u8 port,
if (err)
goto out;
- err = translate_active_width(ibdev, ib_link_width_oper,
- &props->active_width);
- if (err)
- goto out;
+ translate_active_width(ibdev, ib_link_width_oper, &props->active_width);
+
err = mlx5_query_port_ib_proto_oper(mdev, &props->active_speed, port);
if (err)
goto out;
--
2.19.1
