Re: [PATCH v2 0/6] RFC: gup+dma: tracking dma-pinned pages

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



John, thanks for the discussion at LPC. One of the concerns we
raised however was the performance test. The numbers below are
rather obviously tainted. I think we need to get a better baseline
before concluding anything...

Here's my main concern:

On 11/10/2018 3:50 AM, john.hubbard@xxxxxxxxx wrote:
From: John Hubbard <jhubbard@xxxxxxxxxx>
...
------------------------------------------------------
WITHOUT the patch:
------------------------------------------------------
reader: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=64
fio-3.3
Starting 1 process
Jobs: 1 (f=1): [R(1)][100.0%][r=55.5MiB/s,w=0KiB/s][r=14.2k,w=0 IOPS][eta 00m:00s]
reader: (groupid=0, jobs=1): err= 0: pid=1750: Tue Nov  6 20:18:06 2018
    read: IOPS=13.9k, BW=54.4MiB/s (57.0MB/s)(1024MiB/18826msec)

~14000 4KB read IOPS is really, really low for an NVMe disk.

   cpu          : usr=2.39%, sys=95.30%, ctx=669, majf=0, minf=72

CPU is obviously the limiting factor. At these IOPS, it should be far
less.
------------------------------------------------------
OR, here's a better run WITH the patch applied, and you can see that this is nearly as good
as the "without" case:
------------------------------------------------------

reader: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=libaio, iodepth=64
fio-3.3
Starting 1 process
Jobs: 1 (f=1): [R(1)][100.0%][r=53.2MiB/s,w=0KiB/s][r=13.6k,w=0 IOPS][eta 00m:00s]
reader: (groupid=0, jobs=1): err= 0: pid=2521: Tue Nov  6 20:01:33 2018
    read: IOPS=13.4k, BW=52.5MiB/s (55.1MB/s)(1024MiB/19499msec)

Similar low IOPS.

   cpu          : usr=3.47%, sys=94.61%, ctx=370, majf=0, minf=73

Similar CPU saturation.



I get nearly 400,000 4KB IOPS on my tiny desktop, which has a 25W
i7-7500 and a Samsung PM961 128GB NVMe (stock Bionic 4.15 kernel
and fio version 3.1). Even then, the CPU saturates, so it's not
necessarily a perfect test. I'd like to see your runs both get to
"max" IOPS, i.e. CPU < 100%, and compare the CPU numbers. This would
give the best comparison for making a decision.

Can you confirm what type of hardware you're running this test on?
CPU, memory speed and capacity, and NVMe device especially?

Tom.



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux