From: Peng Li <lipeng321@xxxxxxxxxx>
When HW GRO enable, protocol stack will not do GRO again,
driver should add gro param to the skb for the protocol
stack..
Signed-off-by: Peng Li <lipeng321@xxxxxxxxxx>
Signed-off-by: Salil Mehta <salil.mehta@xxxxxxxxxx>
---
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 43 +++++++++++++++++++
.../net/ethernet/hisilicon/hns3/hns3_enet.h | 9 ++--
2 files changed, 49 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 7776089b6bc2..22220af92aa9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -15,6 +15,7 @@
#include <linux/vermagic.h>
#include <net/gre.h>
#include <net/pkt_cls.h>
+#include <net/tcp.h>
#include <net/vxlan.h>
#include "hnae3.h"
@@ -2318,6 +2319,12 @@ static void hns3_rx_checksum(struct hns3_enet_ring *ring, struct sk_buff *skb,
if (!(netdev->features & NETIF_F_RXCSUM))
return;
+ /* We MUST enable hardware checksum before enabling hardware GRO */
+ if (skb_shinfo(skb)->gso_size) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ return;
+ }
+
/* check if hardware has done checksum */
if (!hnae3_get_bit(bd_base_info, HNS3_RXD_L3L4P_B))
return;
@@ -2511,6 +2518,39 @@ static int hns3_add_frag(struct hns3_enet_ring *ring, struct hns3_desc *desc,
return 0;
}
+static void hns3_set_gro_param(struct sk_buff *skb, u32 l234info,
+ u32 bd_base_info)
+{
+ u16 gro_count;
+ u32 l3_type;
+
+ gro_count = hnae3_get_field(l234info, HNS3_RXD_GRO_COUNT_M,
+ HNS3_RXD_GRO_COUNT_S);
+ /* if there is no HW GRO, do not set gro params */
+ if (!gro_count)
+ return;
+
+ /* tcp_gro_complete() will copy NAPI_GRO_CB(skb)->count
+ * to skb_shinfo(skb)->gso_segs
+ */
+ NAPI_GRO_CB(skb)->count = gro_count;
+
+ l3_type = hnae3_get_field(l234info, HNS3_RXD_L3ID_M,
+ HNS3_RXD_L3ID_S);
+ if (l3_type == HNS3_L3_TYPE_IPV4)
+ skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
+ else if (l3_type == HNS3_L3_TYPE_IPV6)
+ skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
+ else
+ return;
+
+ skb_shinfo(skb)->gso_size = hnae3_get_field(bd_base_info,
+ HNS3_RXD_GRO_SIZE_M,
+ HNS3_RXD_GRO_SIZE_S);
+ if (skb_shinfo(skb)->gso_size)
+ tcp_gro_complete(skb);
+}
+
static void hns3_set_rx_skb_rss_type(struct hns3_enet_ring *ring,
struct sk_buff *skb)
{
@@ -2645,6 +2685,9 @@ static int hns3_handle_rx_bd(struct hns3_enet_ring *ring,
ring->tqp_vector->rx_group.total_bytes += skb->len;
+ /* This is needed in order to enable forwarding support */
+ hns3_set_gro_param(skb, l234info, bd_base_info);
+
hns3_rx_checksum(ring, skb, desc);
*out_skb = skb;
hns3_set_rx_skb_rss_type(ring, skb);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 8e56b7e44978..3365c9596983 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -109,6 +109,10 @@ enum hns3_nic_state {
#define HNS3_RXD_DOI_B 21
#define HNS3_RXD_OL3E_B 22
#define HNS3_RXD_OL4E_B 23
+#define HNS3_RXD_GRO_COUNT_S 24
+#define HNS3_RXD_GRO_COUNT_M (0x3f << HNS3_RXD_GRO_COUNT_S)
+#define HNS3_RXD_GRO_FIXID_B 30
+#define HNS3_RXD_GRO_ECN_B 31
#define HNS3_RXD_ODMAC_S 0
#define HNS3_RXD_ODMAC_M (0x3 << HNS3_RXD_ODMAC_S)
@@ -135,9 +139,8 @@ enum hns3_nic_state {
#define HNS3_RXD_TSIND_S 12
#define HNS3_RXD_TSIND_M (0x7 << HNS3_RXD_TSIND_S)
#define HNS3_RXD_LKBK_B 15
-#define HNS3_RXD_HDL_S 16
-#define HNS3_RXD_HDL_M (0x7ff << HNS3_RXD_HDL_S)
-#define HNS3_RXD_HSIND_B 31
+#define HNS3_RXD_GRO_SIZE_S 16
+#define HNS3_RXD_GRO_SIZE_M (0x3ff << HNS3_RXD_GRO_SIZE_S)
#define HNS3_TXD_L3T_S 0
#define HNS3_TXD_L3T_M (0x3 << HNS3_TXD_L3T_S)
--
2.17.1
