This patch mainly set the vlan_id field in the wc
for rdma_listen() to work over vlan. This is
required by ib_init_ah_attr_from_wc() which
is called by the CM REQ handler.
Signed-off-by: Lijun Ou <oulijun@xxxxxxxxxx>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 9 ++++++++-
drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 5 +++++
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 97ff5da..a781f6b 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -2292,7 +2292,14 @@ static int hns_roce_v2_poll_one(struct hns_roce_cq *hr_cq,
wc->smac[5] = roce_get_field(cqe->byte_28,
V2_CQE_BYTE_28_SMAC_5_M,
V2_CQE_BYTE_28_SMAC_5_S);
- wc->vlan_id = 0xffff;
+ if (roce_get_bit(cqe->byte_28, V2_CQE_BYTE_28_VID_VLD_S)) {
+ wc->vlan_id = (u16)roce_get_field(cqe->byte_28,
+ V2_CQE_BYTE_28_VID_M,
+ V2_CQE_BYTE_28_VID_S);
+ } else {
+ wc->vlan_id = 0xffff;
+ }
+
wc->wc_flags |= (IB_WC_WITH_VLAN | IB_WC_WITH_SMAC);
wc->network_hdr_type = roce_get_field(cqe->byte_28,
V2_CQE_BYTE_28_PORT_TYPE_M,
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
index 6f92722..d04be1c 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
@@ -818,6 +818,11 @@ struct hns_roce_v2_cqe {
#define V2_CQE_BYTE_28_PORT_TYPE_S 16
#define V2_CQE_BYTE_28_PORT_TYPE_M GENMASK(17, 16)
+#define V2_CQE_BYTE_28_VID_S 18
+#define V2_CQE_BYTE_28_VID_M GENMASK(29, 18)
+
+#define V2_CQE_BYTE_28_VID_VLD_S 30
+
#define V2_CQE_BYTE_32_RMT_QPN_S 0
#define V2_CQE_BYTE_32_RMT_QPN_M GENMASK(23, 0)
--
1.9.1
