On Thu, Apr 19, 2018 at 03:56:23PM -0400, Sinan Kaya wrote: > The infiniband adapter might be connected to a PCI hotplug slot. Performing > secondary bus reset on a hotplug slot causes PCI link up/down interrupts. > > Hotplug driver removes the device from system when a link down interrupt > is observed and performs re-enumeration when link up interrupt is observed. > > This conflicts with what this code is trying to do. Try secondary bus reset > only if pci_reset_slot() fails/unsupported. Hi Sinan, We had a bunch of discussion here but not sure we ever reached a consensus. It did seem like we'd like to avoid putting hotplug knowledge in drivers, though. What do you think the path forward is? > Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx> > --- > drivers/infiniband/hw/hfi1/pcie.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c > index 83d66e8..75f49e3 100644 > --- a/drivers/infiniband/hw/hfi1/pcie.c > +++ b/drivers/infiniband/hw/hfi1/pcie.c > @@ -908,7 +908,8 @@ static int trigger_sbr(struct hfi1_devdata *dd) > * delay after a reset is required. Per spec requirements, > * the link is either working or not after that point. > */ > - pci_reset_bridge_secondary_bus(dev->bus->self); > + if (pci_reset_slot(dev->slot)) > + pci_reset_bridge_secondary_bus(dev->bus->self); > > return 0; > } > -- > 2.7.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
