Re: [Patch v2 3/6] cifs: smbd: Avoid allocating iov on the stack

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am ok with the other style warning - so I just fixed up the one
error (see attached) and merged into cifs-2.6.git for-next

That leaves two more from your series to review (and for others to
review).  Let's just focus on those two.


On Mon, Apr 23, 2018 at 12:33 PM, Long Li <longli@xxxxxxxxxxxxx> wrote:
>> Subject: Re: [Patch v2 3/6] cifs: smbd: Avoid allocating iov on the stack
>>
>> Didn't see any obvious problems, but can you fix the checkpatch warnings
>> and resend to the list (I am more concerned about the last two warnings
>> rather than the first one).
>
> Yes, I will fix it and resend.
>
>>
>> $ scripts/checkpatch.pl 0001-cifs-smbd-Avoid-allocating-iov-on-the-
>> stack.patch
>> WARNING: line over 80 characters
>> #60: FILE: fs/cifs/smbdirect.c:2106:
>> +        log_write(ERR, "expected the pdu length in 1st iov, but got
>> 0x%lu\n", rqst->rq_iov[0].iov_len);
>>
>> ERROR: Prefixing 0x with decimal output is defective
>> #60: FILE: fs/cifs/smbdirect.c:2106:
>> +        log_write(ERR, "expected the pdu length in 1st iov, but got
>> 0x%lu\n", rqst->rq_iov[0].iov_len);
>>
>> WARNING: braces {} are not necessary for single statement blocks
>> #69: FILE: fs/cifs/smbdirect.c:2112:
>> +    for (i = 0; i < rqst->rq_nvec-1; i++) {
>>          buflen += iov[i].iov_len;
>>      }
>>
>> total: 1 errors, 2 warnings, 65 lines checked
>>
>> NOTE: For some of the reported defects, checkpatch may be able to
>>       mechanically convert to the typical style using --fix or --fix-inplace.
>>
>> 0001-cifs-smbd-Avoid-allocating-iov-on-the-stack.patch has style problems,
>> please review.
>>
>> On Tue, Apr 17, 2018 at 2:17 PM, Long Li <longli@xxxxxxxxxxxxxxxxx> wrote:
>> > From: Long Li <longli@xxxxxxxxxxxxx>
>> >
>> > It's not necessary to allocate another iov when going through the
>> > buffers in smbd_send() through RDMA send.
>> >
>> > Remove it to reduce stack size.
>> >
>> > Signed-off-by: Long Li <longli@xxxxxxxxxxxxx>
>> > Cc: stable@xxxxxxxxxxxxxxx
>> > ---
>> >  fs/cifs/smbdirect.c | 36 ++++++++++++------------------------
>> >  1 file changed, 12 insertions(+), 24 deletions(-)
>> >
>> > diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c index
>> > b5c6c0d..f575e9a 100644
>> > --- a/fs/cifs/smbdirect.c
>> > +++ b/fs/cifs/smbdirect.c
>> > @@ -2088,7 +2088,7 @@ int smbd_send(struct smbd_connection *info,
>> struct smb_rqst *rqst)
>> >         int start, i, j;
>> >         int max_iov_size =
>> >                 info->max_send_size - sizeof(struct smbd_data_transfer);
>> > -       struct kvec iov[SMBDIRECT_MAX_SGE];
>> > +       struct kvec *iov;
>> >         int rc;
>> >
>> >         info->smbd_send_pending++;
>> > @@ -2099,32 +2099,20 @@ int smbd_send(struct smbd_connection *info,
>> struct smb_rqst *rqst)
>> >         }
>> >
>> >         /*
>> > -        * This usually means a configuration error
>> > -        * We use RDMA read/write for packet size >
>> rdma_readwrite_threshold
>> > -        * as long as it's properly configured we should never get into this
>> > -        * situation
>> > -        */
>> > -       if (rqst->rq_nvec + rqst->rq_npages > SMBDIRECT_MAX_SGE) {
>> > -               log_write(ERR, "maximum send segment %x exceeding %x\n",
>> > -                        rqst->rq_nvec + rqst->rq_npages, SMBDIRECT_MAX_SGE);
>> > -               rc = -EINVAL;
>> > -               goto done;
>> > -       }
>> > -
>> > -       /*
>> > -        * Remove the RFC1002 length defined in MS-SMB2 section 2.1
>> > -        * It is used only for TCP transport
>> > +        * Skip the RFC1002 length defined in MS-SMB2 section 2.1
>> > +        * It is used only for TCP transport in the iov[0]
>> >          * In future we may want to add a transport layer under protocol
>> >          * layer so this will only be issued to TCP transport
>> >          */
>> > -       iov[0].iov_base = (char *)rqst->rq_iov[0].iov_base + 4;
>> > -       iov[0].iov_len = rqst->rq_iov[0].iov_len - 4;
>> > -       buflen += iov[0].iov_len;
>> > +
>> > +       if (rqst->rq_iov[0].iov_len != 4) {
>> > +               log_write(ERR, "expected the pdu length in 1st iov, but got
>> 0x%lu\n", rqst->rq_iov[0].iov_len);
>> > +               return -EINVAL;
>> > +       }
>> > +       iov = &rqst->rq_iov[1];
>> >
>> >         /* total up iov array first */
>> > -       for (i = 1; i < rqst->rq_nvec; i++) {
>> > -               iov[i].iov_base = rqst->rq_iov[i].iov_base;
>> > -               iov[i].iov_len = rqst->rq_iov[i].iov_len;
>> > +       for (i = 0; i < rqst->rq_nvec-1; i++) {
>> >                 buflen += iov[i].iov_len;
>> >         }
>> >
>> > @@ -2197,14 +2185,14 @@ int smbd_send(struct smbd_connection *info,
>> struct smb_rqst *rqst)
>> >                                                 goto done;
>> >                                 }
>> >                                 i++;
>> > -                               if (i == rqst->rq_nvec)
>> > +                               if (i == rqst->rq_nvec-1)
>> >                                         break;
>> >                         }
>> >                         start = i;
>> >                         buflen = 0;
>> >                 } else {
>> >                         i++;
>> > -                       if (i == rqst->rq_nvec) {
>> > +                       if (i == rqst->rq_nvec-1) {
>> >                                 /* send out all remaining vecs */
>> >                                 remaining_data_length -= buflen;
>> >                                 log_write(INFO,
>> > --
>> > 2.7.4
>> >
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-cifs"
>> > in the body of a message to majordomo@xxxxxxxxxxxxxxx More
>> majordomo
>> > info at
>> >
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fvger.k
>> > ernel.org%2Fmajordomo-
>> info.html&data=02%7C01%7Clongli%40microsoft.com%
>> >
>> 7C23fbdbb0598a497f624708d5a92f6435%7C72f988bf86f141af91ab2d7cd011d
>> b47%
>> >
>> 7C1%7C0%7C636600943380887988&sdata=imh9cWDQQEXqxHdUrCuEykgiLfKs
>> UAl20jB
>> > yPOS7FrI%3D&reserved=0
>>
>>
>>
>> --
>> Thanks,
>>
>> Steve
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-cifs" in the
>> body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fvger.ke
>> rnel.org%2Fmajordomo-
>> info.html&data=02%7C01%7Clongli%40microsoft.com%7C23fbdbb0598a497f
>> 624708d5a92f6435%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C63
>> 6600943380887988&sdata=imh9cWDQQEXqxHdUrCuEykgiLfKsUAl20jByPOS7F
>> rI%3D&reserved=0



-- 
Thanks,

Steve
From 553018657de265a7c999f4fd12864fd0646319a1 Mon Sep 17 00:00:00 2001
From: Long Li <longli@xxxxxxxxxxxxx>
Date: Tue, 17 Apr 2018 12:17:07 -0700
Subject: [PATCH] cifs: smbd: Avoid allocating iov on the stack

It's not necessary to allocate another iov when going through the buffers
in smbd_send() through RDMA send.

Remove it to reduce stack size.

Signed-off-by: Long Li <longli@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 fs/cifs/smbdirect.c | 36 ++++++++++++------------------------
 1 file changed, 12 insertions(+), 24 deletions(-)

diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c
index 87817ddcc096..24cea63e17f5 100644
--- a/fs/cifs/smbdirect.c
+++ b/fs/cifs/smbdirect.c
@@ -2086,7 +2086,7 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst)
 	int start, i, j;
 	int max_iov_size =
 		info->max_send_size - sizeof(struct smbd_data_transfer);
-	struct kvec iov[SMBDIRECT_MAX_SGE];
+	struct kvec *iov;
 	int rc;
 
 	info->smbd_send_pending++;
@@ -2096,32 +2096,20 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst)
 	}
 
 	/*
-	 * This usually means a configuration error
-	 * We use RDMA read/write for packet size > rdma_readwrite_threshold
-	 * as long as it's properly configured we should never get into this
-	 * situation
-	 */
-	if (rqst->rq_nvec + rqst->rq_npages > SMBDIRECT_MAX_SGE) {
-		log_write(ERR, "maximum send segment %x exceeding %x\n",
-			 rqst->rq_nvec + rqst->rq_npages, SMBDIRECT_MAX_SGE);
-		rc = -EINVAL;
-		goto done;
-	}
-
-	/*
-	 * Remove the RFC1002 length defined in MS-SMB2 section 2.1
-	 * It is used only for TCP transport
+	 * Skip the RFC1002 length defined in MS-SMB2 section 2.1
+	 * It is used only for TCP transport in the iov[0]
 	 * In future we may want to add a transport layer under protocol
 	 * layer so this will only be issued to TCP transport
 	 */
-	iov[0].iov_base = (char *)rqst->rq_iov[0].iov_base + 4;
-	iov[0].iov_len = rqst->rq_iov[0].iov_len - 4;
-	buflen += iov[0].iov_len;
+
+	if (rqst->rq_iov[0].iov_len != 4) {
+		log_write(ERR, "expected the pdu length in 1st iov, but got %lu\n", rqst->rq_iov[0].iov_len);
+		return -EINVAL;
+	}
+	iov = &rqst->rq_iov[1];
 
 	/* total up iov array first */
-	for (i = 1; i < rqst->rq_nvec; i++) {
-		iov[i].iov_base = rqst->rq_iov[i].iov_base;
-		iov[i].iov_len = rqst->rq_iov[i].iov_len;
+	for (i = 0; i < rqst->rq_nvec-1; i++) {
 		buflen += iov[i].iov_len;
 	}
 
@@ -2198,14 +2186,14 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst)
 						goto done;
 				}
 				i++;
-				if (i == rqst->rq_nvec)
+				if (i == rqst->rq_nvec-1)
 					break;
 			}
 			start = i;
 			buflen = 0;
 		} else {
 			i++;
-			if (i == rqst->rq_nvec) {
+			if (i == rqst->rq_nvec-1) {
 				/* send out all remaining vecs */
 				remaining_data_length -= buflen;
 				log_write(INFO,
-- 
2.14.1


[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux