From: Danit Goldberg <danitg@xxxxxxxxxxxx>
Before the change, if the user passed a static rate value different
than zero and the FW doesn't support static rate,
it would end up configuring rate of 2.5 GBps.
Fix this by using rate 0; unlimited, in cases where FW
doesn't support static rate configuration.
Cc: <stable@xxxxxxxxxxxxxxx> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@xxxxxxxxxxxx>
Signed-off-by: Danit Goldberg <danitg@xxxxxxxxxxxx>
Signed-off-by: Leon Romanovsky <leonro@xxxxxxxxxxxx>
---
drivers/infiniband/hw/mlx5/qp.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index e6219a5f1f37..87b7c1be2a11 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -2455,18 +2455,18 @@ enum {
static int ib_rate_to_mlx5(struct mlx5_ib_dev *dev, u8 rate)
{
- if (rate == IB_RATE_PORT_CURRENT) {
+ if (rate == IB_RATE_PORT_CURRENT)
return 0;
- } else if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS) {
+
+ if (rate < IB_RATE_2_5_GBPS || rate > IB_RATE_300_GBPS)
return -EINVAL;
- } else {
- while (rate != IB_RATE_2_5_GBPS &&
- !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
- MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
- --rate;
- }
- return rate + MLX5_STAT_RATE_OFFSET;
+ while (rate != IB_RATE_PORT_CURRENT &&
+ !(1 << (rate + MLX5_STAT_RATE_OFFSET) &
+ MLX5_CAP_GEN(dev->mdev, stat_rate_support)))
+ --rate;
+
+ return rate ? rate + MLX5_STAT_RATE_OFFSET : rate;
}
static int modify_raw_packet_eth_prio(struct mlx5_core_dev *dev,
--
2.14.3
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
