On Wed, Mar 14, 2018 at 06:21:09PM +0200, Leon Romanovsky wrote: > On Wed, Mar 14, 2018 at 11:03:32AM -0500, Steve Wise wrote: > > > > > Is something missing? > > > > > > > > The fix is waiting in wip/dl-for-next, it should merge over tomorrow. > > > > > > > > cherry-pick this to fix it: > > > > > > > > commit d83a69c2b1b17a8aedc7a75ba8b620bfd2057e93 > > > > Author: Saeed Mahameed <saeedm@xxxxxxxxxxxx> > > > > Date: Wed Mar 7 15:44:48 2018 -0800 > > > > > > > > net/mlx5: Use MLX5_IPSEC_DEV macro for ipsec caps > > > > > > > > Fix build break of mlx5_accel_ipsec_device_caps is not defined when > > > > MLX5_ACCEL is not selected, use MLX5_IPSEC_DEV instead which handles > > > > such case. > > > > > > > > Signed-off-by: Saeed Mahameed <saeedm@xxxxxxxxxxxx> > > > > Reported-by: Doug Ledford <dledford@xxxxxxxxxx> > > > > > > > > Jason > > > > > > > It also seems mlx5 is broken somehow. With the above, it compiles, but I > > don't get any netdev interface added when I load mlx5_ib: > > > > [54975.990560] mlx5_0:wait_for_async_commands:736:(pid 6035): done with all > > pending requests > > [54978.041338] mlx5_1:wait_for_async_commands:736:(pid 6035): done with all > > pending requests > > [54983.996241] mlx5_core 0000:83:00.0: firmware version: 12.21.2010 > > [54984.909826] mlx5_core 0000:83:00.0: Port module event: module 0, Cable > > plugged > > [54984.918074] mlx5_core 0000:83:00.1: firmware version: 12.21.2010 > > [54985.831329] mlx5_core 0000:83:00.1: Port module event: module 1, Cable > > unplugged > > [54985.900659] mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 > > [54985.907456] mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 > > > > The same setup works with 4.14.25: > > > > [root@stevo1 ~]# dmesg|grep mlx5 > > [ 5.787809] mlx5_core 0000:83:00.0: firmware version: 12.21.2010 > > [ 6.684023] mlx5_core 0000:83:00.0: Port module event: module 0, Cable > > plugged > > [ 6.689769] mlx5_core 0000:83:00.1: firmware version: 12.21.2010 > > [ 7.593204] mlx5_core 0000:83:00.1: Port module event: module 1, Cable > > unplugged > > [ 7.606499] mlx5_core 0000:83:00.0: MLX5E: StrdRq(0) RqSz(1024) StrdSz(1) > > RxCqeCmprss(0) > > [ 7.769859] mlx5_core 0000:83:00.1: MLX5E: StrdRq(0) RqSz(1024) StrdSz(1) > > RxCqeCmprss(0) > > [ 7.962760] mlx5_core 0000:83:00.0 enp131s0f0: renamed from eth0 > > [ 7.975142] mlx5_core 0000:83:00.1 enp131s0f1: renamed from eth1 > > [ 16.573759] mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 > > [ 105.460515] mlx5_core 0000:83:00.0 enp131s0f0: Link up > > [root@stevo1 ~]# > > > > > > Leon, any ideas? > > No, I didn't heard any complains from our verification team, but maybe > Saeed is aware of any known issues. Steve, Can you send me you config? I'll try it on Sunday. It worked for me, [ 12.824317] mlx5_core 0000:00:04.0: firmware version: 16.22.1010 [ 13.871625] mlx5_core 0000:00:04.0: Port module event: module 1, Cable plugged [ 15.507969] mlx5_core 0000:00:05.0: firmware version: 16.22.1010 [ 16.533934] mlx5_core 0000:00:05.0: Port module event: module 1, Cable plugged [ 16.553170] mlx5_core 0000:00:04.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(64) RxCqeCmprss(0) [ 16.707925] mlx5_core 0000:00:05.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(64) RxCqeCmprss(0) [ 16.991625] mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 [ 16.995364] mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 [ 18.876848] RDS/IB: mlx5_0: FRMR supported and preferred [ 18.880149] RDS/IB: mlx5_1: FRMR supported and preferred [ 22.454987] mlx5_core 0000:00:04.0 ens4: renamed from eth1 [ 22.467303] mlx5_core 0000:00:05.0 ens5: renamed from eth2 [ 26.809577] mlx5_core 0000:00:04.0 ens4: Link up [ 26.941952] mlx5_core 0000:00:05.0 ens5: Link up > > Thanks > > > > > > Steve, > >
Attachment:
signature.asc
Description: PGP signature
