From: Leon Romanovsky <leonro@xxxxxxxxxxxx>
The kernel compiled with CONFIG_REFCOUNT_FULL produces the following
error. The reason to it that initial value of refcount_t is supposed
to be more than 0, change it.
[ 3.106634] ------------[ cut here ]------------
[ 3.107756] refcount_t: increment on 0; use-after-free.
[ 3.109130] WARNING: CPU: 0 PID: 1 at lib/refcount.c:153 refcount_inc+0x27/0x30
[ 3.110085] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00028-gf683e04bdccc #137
[ 3.110085] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[ 3.110085] RIP: 0010:refcount_inc+0x27/0x30
[ 3.110085] RSP: 0000:ffffaa620000fba0 EFLAGS: 00010286
[ 3.110085] RAX: 0000000000000000 RBX: ffff9a6d1a1821c8 RCX: ffffffff98a50f48
[ 3.110085] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000246
[ 3.110085] RBP: ffff9a6d1ac800a0 R08: 0000000000000289 R09: 000000000000000a
[ 3.110085] R10: fffff03bc0682840 R11: ffffffff9949856d R12: ffff9a6d1b4a4000
[ 3.110085] R13: 0000000000000000 R14: ffff9a6d1a0a6c00 R15: ffffaa620000fc5c
[ 3.110085] FS: 0000000000000000(0000) GS:ffff9a6d1fc00000(0000) knlGS:0000000000000000
[ 3.110085] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.110085] CR2: 0000000000000000 CR3: 000000000ba0a000 CR4: 00000000000006b0
[ 3.110085] Call Trace:
[ 3.110085] mlx5_core_create_cq+0xde/0x250
[ 3.110085] ? __kmalloc+0x1ce/0x1e0
[ 3.110085] mlx5e_create_cq+0x15c/0x1e0
[ 3.110085] mlx5e_open_drop_rq+0xea/0x190
[ 3.110085] mlx5e_attach_netdev+0x53/0x140
[ 3.110085] mlx5e_attach+0x3d/0x60
[ 3.110085] mlx5e_add+0x11d/0x2f0
[ 3.110085] mlx5_add_device+0x77/0x170
[ 3.110085] mlx5_register_interface+0x74/0xc0
[ 3.110085] ? set_debug_rodata+0x11/0x11
[ 3.110085] init+0x67/0x72
[ 3.110085] ? mlx4_en_init_ptys2ethtool_map+0x346/0x346
[ 3.110085] do_one_initcall+0x98/0x147
[ 3.110085] ? set_debug_rodata+0x11/0x11
[ 3.110085] kernel_init_freeable+0x164/0x1e0
[ 3.110085] ? rest_init+0xb0/0xb0
[ 3.110085] kernel_init+0xa/0x100
[ 3.110085] ret_from_fork+0x35/0x40
[ 3.110085] Code: 00 00 00 00 e8 ab ff ff ff 84 c0 74 02 f3 c3 80 3d 3b c3 64 01 00 75 f5 48 c7 c7 68 0b 81 98 c6 05 2b c3 64 01 01 e8 79 d7 a3 ff <0f> ff c3 66 0f 1f 44 00 00 8b 06 83 f8 ff 74 39 31 c9 39 f8 89
[ 3.110085] ---[ end trace a0068e1c68438a74 ]---
Fixes: f105b45bf77c ("net/mlx5: CQ hold/put API")
Signed-off-by: Leon Romanovsky <leonro@xxxxxxxxxxxx>
Signed-off-by: Saeed Mahameed <saeedm@xxxxxxxxxxxx>
---
drivers/net/ethernet/mellanox/mlx5/core/cq.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cq.c b/drivers/net/ethernet/mellanox/mlx5/core/cq.c
index 669ed16938b3..a4179122a279 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cq.c
@@ -109,8 +109,7 @@ int mlx5_core_create_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq,
cq->cons_index = 0;
cq->arm_sn = 0;
cq->eq = eq;
- refcount_set(&cq->refcount, 0);
- mlx5_cq_hold(cq);
+ refcount_set(&cq->refcount, 1);
init_completion(&cq->free);
if (!cq->comp)
cq->comp = mlx5_add_cq_to_tasklet;
--
2.14.3
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
