Re: Loopback with RXE?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi folks,

Just a quick update, upgrading to kernel v4.14 solves my issue.

It looks like rdma-core 16 in Debian stretch-backports does not work with kernel v4.9 in Debian stretch.

And yep, matching is important :P

Best,
Bairen

> On 18 Feb 2018, at 05:23, Majd Dibbiny <majd@xxxxxxxxxxxx> wrote:
> 
>> 
>> On Feb 17, 2018, at 3:03 PM, Yi Bairen <byron@xxxxxxxxxx> wrote:
>> 
>> Hi,
>> 
>>> On 15 Feb 2018, at 03:25, Yuval Shaia <yuval.shaia@xxxxxxxxxx> wrote:
>>> 
>>> On Wed, Feb 14, 2018 at 05:13:07PM +0000, Yi Bairen wrote:
>>>> Hi folks,
>>>> 
>>>> Seems I can’t get a Linux 4.9 (Debian 9.3) VM working with single box SoftRoCE loopback. I installed rdma-core 16. The rdma_client & rdma_server in the same box seems working. However, when I use ib_write_bw in the same box, the QPs can’t be connected through the same rxe device.
>>> 
>>> If the QPs connection is problematic then how come rdma_* is working?
>> 
>> The rdma_client and rdma_server do work with `end 0`. 
>> 
>> The ib_write_bw seems to hang. If I kill the server side, the client does not respond. If I kill the client side, it shows the following log:
>> 
>> $ ib_write_bw
> Did you try to specify a gid index with -x param? For example ib_write_bw -x 0.
> 
> Without gid I would expect init2rtr to fail.. which doesn’t seem the case though ..
>> 
>> ************************************
>> * Waiting for client to connect... *
>> ************************************
>> ---------------------------------------------------------------------------------------
>>                   RDMA_Write BW Test
>> Dual-port       : OFF        Device         : rxe0
>> Number of qps   : 1        Transport type : IB
>> Connection type : RC        Using SRQ      : OFF
>> CQ Moderation   : 100
>> Mtu             : 1024[B]
>> Link type       : Ethernet
>> GID index       : 1
>> Max inline data : 0[B]
>> rdma_cm QPs     : OFF
>> Data ex. method : Ethernet
>> ---------------------------------------------------------------------------------------
>> local address: LID 0000 QPN 0x0014 PSN 0x3787ca RKey 0x00052c VAddr 0x007f3dd4c42000
>> GID: 00:00:00:00:00:00:00:00:00:00:255:255:159:65:13:34
>> remote address: LID 0000 QPN 0x0015 PSN 0x5c8ba9 RKey 0x000658 VAddr 0x007f30e74b3000
>> GID: 00:00:00:00:00:00:00:00:00:00:255:255:159:65:13:34
>> ---------------------------------------------------------------------------------------
>> #bytes     #iterations    BW peak[MB/sec]    BW average[MB/sec]   MsgRate[Mpps]
>> ethernet_read_keys: Couldn't read remote address
>> Unable to read to socket/rdam_cm
>> Failed to exchange data between server and clients
>> 
>> #bytes     #iterations    BW peak[MB/sec]    BW average[MB/sec]   MsgRate[Mpps]
>> ethernet_read_keys: Couldn't read remote address
>> Unable to read to socket/rdam_cm
>> Failed to exchange data between server and clients
>> 
>> My RXE config:
>> 
>> $ sudo rxe_cfg start
>> Name     Link  Driver      Speed  NMTU  IPv4_addr  RDEV  RMTU
>> docker0  no    bridge
>> eth0     yes   virtio_net                          rxe0  1024  (3)
>> eth1     yes   virtio_net                          rxe1  1024  (3)
>> 
>> dmesg:
>> 
>> [14441.336707] rdma_rxe: loaded
>> [14441.375108] Loading iSCSI transport class v2.0-870.
>> [14441.380930] rdma_rxe: set rxe0 active
>> [14441.381824] rdma_rxe: added rxe0 to eth0
>> [14441.389567] iscsi: registered transport (iser)
>> [14441.403595] RPC: Registered named UNIX socket transport module.
>> [14441.404618] RPC: Registered udp transport module.
>> [14441.405390] RPC: Registered tcp transport module.
>> [14441.406057] RPC: Registered tcp NFSv4.1 backchannel transport module.
>> [14441.415816] RPC: Registered rdma transport module.
>> [14441.416689] RPC: Registered rdma backchannel transport module.
>> [14441.419979] rdma_rxe: set rxe1 active
>> [14441.420657] rdma_rxe: added rxe1 to eth1
>> [14470.422836] detected loopback device
>> [14484.278022] rdma_rxe: qp#18 moved to error state
>> 
>>> 
>>>> 
>>>> I’d like to know if rxe loopback is known to be broken, and how to fix it.
>>>> 
>>>> Best,
>>>> Bairen Yi
>> 
>> Bairen Yi
>> 
>> N�����r��y���b�X��ǧv�^�)޺{.n�+����{��ٚ�{ay�ʇڙ�,j��f���h���z��w������j:+v���w�j�m��������zZ+�����ݢj"��!�i

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux