On Thu, Feb 01, 2018 at 12:48:18PM -0500, Hal Rosenstock wrote: > On 2/1/2018 8:32 AM, Aishwarya Pant wrote: > > Add documentation for core and hardware specific infiniband interfaces. > > The descriptions have been collected from git commit logs, reading > > through code and data sheets. Some drivers have incomplete doc and are > > annotated with the comment '[to be documented]'. > > > > Signed-off-by: Aishwarya Pant <aishpant@xxxxxxxxx> > > --- > > Documentation/ABI/testing/sysfs-class-infiniband | 755 +++++++++++++++++++++++ > > 1 file changed, 755 insertions(+) > > > > diff --git a/Documentation/ABI/testing/sysfs-class-infiniband b/Documentation/ABI/testing/sysfs-class-infiniband > > index a86abe66a316..2e150169633b 100644 > > --- a/Documentation/ABI/testing/sysfs-class-infiniband > > +++ b/Documentation/ABI/testing/sysfs-class-infiniband > > @@ -1,3 +1,194 @@ > > +sysfs interface common for all infiniband devices > > +------------------------------------------------- > > + > > +What: /sys/class/infiniband/<device>/node_type > > +What: /sys/class/infiniband/<device>/node_guid > > +What: /sys/class/infiniband/<device>/sys_image_guid > > +Date: Apr, 2005 > > +KernelVersion: v2.6.12 > > +Contact: linux-rdma@xxxxxxxxxxxxxxx > > +Description: > > + node_type: (RO) Node type (CA, RNIC, usNIC, usNIC UDP, > > + switch or router) > > + > > + node_guid: (RO) Node GUID > > + > > + sys_image_guid: (RO) System image GUID > > + > > + > > +What: /sys/class/infiniband/<device>/node_desc > > +Date: Feb, 2006 > > +KernelVersion: v2.6.17 > > +Contact: linux-rdma@xxxxxxxxxxxxxxx > > +Description: > > + (RW) Update the node description with information such as the > > + node's hostname, so that IB network management software can tie > > + its view to the real world. > > + > > + > > +What: /sys/class/infiniband/<device>/fw_ver > > +Date: Jun, 2016 > > +KernelVersion: v4.10 > > +Contact: linux-rdma@xxxxxxxxxxxxxxx > > +Description: > > + (RO) Display firmware version > > + > > + > > +What: /sys/class/infiniband/<device>/ports/<port-num>/lid > > +What: /sys/class/infiniband/<device>/ports/<port-num>/rate > > +What: /sys/class/infiniband/<device>/ports/<port-num>/lid_mask_count > > +What: /sys/class/infiniband/<device>/ports/<port-num>/sm_sl > > +What: /sys/class/infiniband/<device>/ports/<port-num>/sm_lid > > +What: /sys/class/infiniband/<device>/ports/<port-num>/state > > +What: /sys/class/infiniband/<device>/ports/<port-num>/phys_state > > +What: /sys/class/infiniband/<device>/ports/<port-num>/cap_mask > > +Date: Apr, 2005 > > +KernelVersion: v2.6.12 > > +Contact: linux-rdma@xxxxxxxxxxxxxxx > > +Description: > > + > > + lid: (RO) Port LID > > + > > + rate: (RO) Port data rate (active width * active > > + speed) > > + > > + lid_mask_count: (RO) Port LID mask count > > + > > + sm_slL (RO) Subnet manager SL for port's subnet > > Typo sm_sl: > > > + > > + sm_lid: (RO) Subnet manager LID for port's subnet > > + > > + state: (RO) Port state (DOWN, INIT, ARMED, ACTIVE or > > + ACTIVE_DEFER> + > > + phys_state: (RO) Port physical state (Sleep, Polling, > > + LinkUp, etc) > > + > > + cap_mask: (RO) Port capability mask > > 2 bits here are settable: IsCommunicationManagementSupported and IsSM. Hi Sorry, I don't quite understand this. cap_mask is a read only value which indicates the supported functions. So the two bits- IsCommunicationManagementSupported and IsSM, should not be setttable? Aishwarya <snip> -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
