Re: SQ overflow seen running isert traffic with high block sizes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Shiraz, Ram, Ariel, & Potnuri,

Following up on this old thread, as it relates to Potnuri's recent fix
for a iser-target queue-full memory leak:

https://www.spinics.net/lists/target-devel/msg16282.html

Just curious how frequent this happens in practice with sustained large
block workloads, as it appears to effect at least three different
iwarp RNICS (i40iw, qedr and iw_cxgb4)..?

Is there anything else from an iser-target consumer level that should be
changed for iwarp to avoid repeated ib_post_send() failures..?

On Fri, 2017-10-06 at 17:40 -0500, Shiraz Saleem wrote:
> On Mon, Jul 17, 2017 at 03:26:04AM -0600, Amrani, Ram wrote:
> > Hi Nicholas,
> > 
> > > Just to confirm, the following four patches where required to get
> > > Potnuri up and running on iser-target + iw_cxgb4 with a similarly small
> > > number of hw SGEs:
> > > 
> > > 7a56dc8 iser-target: avoid posting a recv buffer twice
> > > 555a65f iser-target: Fix queue-full response handling
> > > a446701 iscsi-target: Propigate queue_data_in + queue_status errors
> > > fa7e25c target: Fix unknown fabric callback queue-full errors
> > > 
> > > So Did you test with Q-Logic/Cavium with RoCE using these four patches,
> > > or just with commit a4467018..?
> > > 
> > > Note these have not been CC'ed to stable yet, as I was reluctant since
> > > they didn't have much mileage on them at the time..
> > > 
> > > Now however, they should be OK to consider for stable, especially if
> > > they get you unblocked as well.
> > 
> > The issue is still seen with these four patches.
> > 
> > Thanks,
> > Ram
> 
> Hi,
> 
> On X722 Iwarp NICs (i40iw) too, we are seeing a similar issue of SQ overflow being hit on
> isert for larger block sizes. 4.14-rc2 kernel.
> 
> Eventually there is a timeout/conn-error on iser initiator and the connection is torn down.
> 
> The aforementioned patches dont seem to be alleviating the SQ overflow issue?
> 
> Initiator
> ------------
> 
> [17007.465524] scsi host11: iSCSI Initiator over iSER
> [17007.466295] iscsi: invalid can_queue of 55. can_queue must be a power of 2.
> [17007.466924] iscsi: Rounding can_queue to 32.
> [17007.471535] scsi 11:0:0:0: Direct-Access     LIO-ORG  ramdisk1_40G     4.0  PQ: 0 ANSI: 5
> [17007.471652] scsi 11:0:0:0: alua: supports implicit and explicit TPGS
> [17007.471656] scsi 11:0:0:0: alua: device naa.6001405ab790db5e8e94b0998ab4bf0b port group 0 rel port 1
> [17007.471782] sd 11:0:0:0: Attached scsi generic sg2 type 0
> [17007.472373] sd 11:0:0:0: [sdb] 83886080 512-byte logical blocks: (42.9 GB/40.0 GiB)
> [17007.472405] sd 11:0:0:0: [sdb] Write Protect is off
> [17007.472406] sd 11:0:0:0: [sdb] Mode Sense: 43 00 00 08
> [17007.472462] sd 11:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [17007.473412] sd 11:0:0:0: [sdb] Attached SCSI disk
> [17007.478184] sd 11:0:0:0: alua: transition timeout set to 60 seconds
> [17007.478186] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA
> [17031.269821]  sdb:
> [17033.359789] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
> [17049.056155]  connection2:0: ping timeout of 5 secs expired, recv timeout 5, last rx 4311705998, last ping 4311711232, now 4311716352
> [17049.057499]  connection2:0: detected conn error (1022)
> [17049.057558] modifyQP to CLOSING qp 3 next_iw_state 3
> [..]
> 
> 
> Target
> ----------
> [....]
> [17066.397179] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397180] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ec020 failed to post RDMA res
> [17066.397183] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397183] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ea1f8 failed to post RDMA res
> [17066.397184] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397184] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8e9bf0 failed to post RDMA res
> [17066.397187] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397188] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ecc30 failed to post RDMA res
> [17066.397192] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397192] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8f20a0 failed to post RDMA res
> [17066.397195] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397196] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ea800 failed to post RDMA res
> [17066.397196] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397197] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ede48 failed to post RDMA res
> [17066.397200] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397200] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ec020 failed to post RDMA res
> [17066.397204] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397204] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ea1f8 failed to post RDMA res
> [17066.397206] i40iw i40iw_process_aeq ae_id = 0x503 bool qp=1 qp_id = 3
> [17066.397207] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397207] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8e9bf0 failed to post RDMA res
> [17066.397211] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397211] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ecc30 failed to post RDMA res
> [17066.397215] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397215] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8f20a0 failed to post RDMA res
> [17066.397218] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397219] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ea800 failed to post RDMA res
> [17066.397219] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397220] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ede48 failed to post RDMA res
> [17066.397232] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397233] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ec020 failed to post RDMA res
> [17066.397237] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397237] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ea1f8 failed to post RDMA res
> [17066.397238] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397238] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8e9bf0 failed to post RDMA res
> [17066.397242] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397242] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ecc30 failed to post RDMA res
> [17066.397245] i40iw_post_send: qp 3 wr_opcode 0 ret_err -12
> [17066.397247] i40iw i40iw_process_aeq ae_id = 0x501 bool qp=1 qp_id = 3
> [17066.397247] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8f20a0 failed to post RDMA res
> [17066.397251] QP 3 flush_issued
> [17066.397252] i40iw_post_send: qp 3 wr_opcode 0 ret_err -22
> [17066.397252] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ea800 failed to post RDMA res
> [17066.397253] Got unknown fabric queue status: -22
> [17066.397254] QP 3 flush_issued
> [17066.397254] i40iw_post_send: qp 3 wr_opcode 0 ret_err -22
> [17066.397254] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ede48 failed to post RDMA res
> [17066.397255] Got unknown fabric queue status: -22
> [17066.397258] QP 3 flush_issued
> [17066.397258] i40iw_post_send: qp 3 wr_opcode 0 ret_err -22
> [17066.397259] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ec020 failed to post RDMA res
> [17066.397259] Got unknown fabric queue status: -22
> [17066.397267] QP 3 flush_issued
> [17066.397267] i40iw_post_send: qp 3 wr_opcode 0 ret_err -22
> [17066.397268] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ea1f8 failed to post RDMA res
> [17066.397268] Got unknown fabric queue status: -22
> [17066.397287] QP 3 flush_issued
> [17066.397287] i40iw_post_send: qp 3 wr_opcode 0 ret_err -22
> [17066.397288] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8e9bf0 failed to post RDMA res
> [17066.397288] Got unknown fabric queue status: -22
> [17066.397291] QP 3 flush_issued
> [17066.397292] i40iw_post_send: qp 3 wr_opcode 0 ret_err -22
> [17066.397292] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8ecc30 failed to post RDMA res
> [17066.397292] Got unknown fabric queue status: -22
> [17066.397295] QP 3 flush_issued
> [17066.397296] i40iw_post_send: qp 3 wr_opcode 0 ret_err -22
> [17066.397296] isert: isert_rdma_rw_ctx_post: Cmd: ffff8817fb8f20a0 failed to post RDMA res
> [17066.397297] Got unknown fabric queue status: -22
> [17066.397307] QP 3 flush_issued
> [17066.397307] i40iw_post_send: qp 3 wr_opcode 8 ret_err -22
> [17066.397308] isert: isert_post_response: ib_post_send failed with -22
> [17066.397309] i40iw i40iw_qp_disconnect Call close API
> [....]
> 
> Shiraz 
> --
> To unsubscribe from this list: send the line "unsubscribe target-devel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux