When a packet is sent back to iWARP FW via the tx ll2 connection the FW needs to know the source of the packet. Whether it is OOO or unaligned MPA related. Since OOO is implemented entirely inside the ll2 code (and shared with iSCSI), packets are marked as IN_ORDER inside the ll2 code. For unaligned mpa the value will be determined in the iWARP code and sent on the pkt->vlan field. Signed-off-by: Michal Kalderon <Michal.Kalderon@xxxxxxxxxx> Signed-off-by: Ariel Elior <Ariel.Elior@xxxxxxxxxx> --- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c index 864132a..dbcbf86 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c @@ -1613,7 +1613,12 @@ static void qed_ll2_prepare_tx_packet_set(struct qed_hwfn *p_hwfn, } start_bd = (struct core_tx_bd *)qed_chain_produce(p_tx_chain); - start_bd->nw_vlan_or_lb_echo = cpu_to_le16(pkt->vlan); + if (QED_IS_IWARP_PERSONALITY(p_hwfn) && + p_ll2->input.conn_type == QED_LL2_TYPE_OOO) + start_bd->nw_vlan_or_lb_echo = + cpu_to_le16(IWARP_LL2_IN_ORDER_TX_QUEUE); + else + start_bd->nw_vlan_or_lb_echo = cpu_to_le16(pkt->vlan); SET_FIELD(start_bd->bitfield1, CORE_TX_BD_L4_HDR_OFFSET_W, cpu_to_le16(pkt->l4_hdr_offset_w)); SET_FIELD(start_bd->bitfield1, CORE_TX_BD_TX_DST, tx_dest); -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
