Sorry, Please ignore this mail. I forgot to add the Andrew Lunn signed-off-by Tag will this patch. I will add the tag and send the updated version of V4 again. Sorry again. > -----Original Message----- > From: Salil Mehta > Sent: Monday, August 21, 2017 3:40 PM > To: davem@xxxxxxxxxxxxx > Cc: Salil Mehta; Zhuangyuzeng (Yisen); lipeng (Y); > mehta.salil.lnk@xxxxxxxxx; netdev@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; linux-rdma@xxxxxxxxxxxxxxx; Linuxarm > Subject: [PATCH V4 net-next] net: hns3: Add support to change MTU in > HNS3 hardware > > This patch adds the following support to the HNS3 driver: > 1. Support to change the Maximum Transmission Unit of a > port in the HNS NIC hardware. > 2. Initializes the supported MTU range for the netdevice. > > Signed-off-by: lipeng <lipeng321@xxxxxxxxxx> > Signed-off-by: Salil Mehta <salil.mehta@xxxxxxxxxx> > --- > PATCH V4: Addressed some minor comments Leon Romanovsky > 1. https://lkml.org/lkml/2017/8/21/212 > PATCH V3: Addressed some minor comments Leon Romanovsky > 1. https://lkml.org/lkml/2017/8/20/27 > PATCH V2: Addresses comments given by Andrew Lunn > 1. https://lkml.org/lkml/2017/8/18/282 > PATCH V1: Initial Submit > --- > .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 34 > ++++++++++++++++++++++ > .../net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h | 1 + > 2 files changed, 35 insertions(+) > > diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c > b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c > index e731f87..1c3e294 100644 > --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c > +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c > @@ -1278,11 +1278,42 @@ static int hns3_ndo_set_vf_vlan(struct > net_device *netdev, int vf, u16 vlan, > return ret; > } > > +static int hns3_nic_change_mtu(struct net_device *netdev, int new_mtu) > +{ > + struct hns3_nic_priv *priv = netdev_priv(netdev); > + struct hnae3_handle *h = priv->ae_handle; > + bool if_running = netif_running(netdev); > + int ret; > + > + if (!h->ae_algo->ops->set_mtu) > + return -EOPNOTSUPP; > + > + /* if this was called with netdev up then bring netdevice down */ > + if (if_running) { > + (void)hns3_nic_net_stop(netdev); > + msleep(100); > + } > + > + ret = h->ae_algo->ops->set_mtu(h, new_mtu); > + if (ret) { > + netdev_err(netdev, "failed to change MTU in hardware %d\n", > + ret); > + return ret; > + } > + > + /* if the netdev was running earlier, bring it up again */ > + if (if_running && hns3_nic_net_open(netdev)) > + ret = -EINVAL; > + > + return ret; > +} > + > static const struct net_device_ops hns3_nic_netdev_ops = { > .ndo_open = hns3_nic_net_open, > .ndo_stop = hns3_nic_net_stop, > .ndo_start_xmit = hns3_nic_net_xmit, > .ndo_set_mac_address = hns3_nic_net_set_mac_address, > + .ndo_change_mtu = hns3_nic_change_mtu, > .ndo_set_features = hns3_nic_set_features, > .ndo_get_stats64 = hns3_nic_get_stats64, > .ndo_setup_tc = hns3_nic_setup_tc, > @@ -2752,6 +2783,9 @@ static int hns3_client_init(struct hnae3_handle > *handle) > goto out_reg_netdev_fail; > } > > + /* MTU range: (ETH_MIN_MTU(kernel default) - 9706) */ > + netdev->max_mtu = HNS3_MAX_MTU - (ETH_HLEN + ETH_FCS_LEN + > VLAN_HLEN); > + > return ret; > > out_reg_netdev_fail: > diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h > b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h > index a6e8f15..7e87461 100644 > --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h > +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.h > @@ -76,6 +76,7 @@ enum hns3_nic_state { > #define HNS3_RING_NAME_LEN 16 > #define HNS3_BUFFER_SIZE_2048 2048 > #define HNS3_RING_MAX_PENDING 32768 > +#define HNS3_MAX_MTU 9728 > > #define HNS3_BD_SIZE_512_TYPE 0 > #define HNS3_BD_SIZE_1024_TYPE 1 > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
