On 07/18/2017 04:27 PM, Laurence Oberman wrote:
On 07/18/2017 04:05 PM, Bart Van Assche wrote:
On Tue, 2017-07-18 at 16:01 -0400, Laurence Oberman wrote:
Yep, That patch seems to be in 4.12 and in 4.13 RC1.
4.12 is working.
I am going to add some debug now as I really dont feel like a bisect
build unless I first try figure out the differences.
Hello Laurence,
Is SELinux enabled on your test setup? If so, can you repeat your test
after having disabled it?
Bart.
Hi Bart
Thanks for replying.
Its disabled (at least now it is.) although it should have also been
disabled when I tested.
I will re-run the test in case.
[root@dhcp40-139 ~]# getenforce
Disabled
Just waiting on a kernel build as I decided to start the bisect as it is
not that many kernels between v12.x and v13 RC1.
I will say there are lots of code changes in V4.13 showing stuff about
the RTS in the QP states (Mostly in ROCE though)
Thanks
Laurence
Hi Bart
[root@dhcp40-139 ~]# getenforce
Disabled
[root@dhcp40-139 ~]# uname -a
Linux dhcp40-139.desklab.eng.bos.redhat.com 4.13.0-rc1 #1 SMP Tue Jul 18
09:15:03 EDT 2017 x86_64 x86_64 x86_64 GNU/Linux
[root@dhcp40-139 ~]# run_srp_daemon -f /etc/ddn/srp_daemon.conf -R 30
-T 10 -t 7000 -ance -i mlx5_0 -p 1
srp_daemon[14691]: failed to modify QP state to RTR
srp_daemon[14691]: failed to modify QP state from RESET to RTS
OK, will do the bisect now
Thanks
Laurence
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
