----- Original Message -----
> From: "Laurence Oberman" <loberman@xxxxxxxxxx>
> To: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
> Cc: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>, "Bart Van Assche" <bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
> <dledford@xxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>, "Israel Rukshin" <israelr@xxxxxxxxxxxx>,
> linux-rdma@xxxxxxxxxxxxxxx
> Sent: Wednesday, April 26, 2017 8:18:13 AM
> Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms() overflows the klms[] array
>
>
>
> ----- Original Message -----
> > From: "Laurence Oberman" <loberman@xxxxxxxxxx>
> > To: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
> > Cc: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>, "Bart Van Assche"
> > <bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
> > <dledford@xxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>, "Israel Rukshin"
> > <israelr@xxxxxxxxxxxx>,
> > linux-rdma@xxxxxxxxxxxxxxx
> > Sent: Wednesday, April 26, 2017 7:47:37 AM
> > Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
> > overflows the klms[] array
> >
> >
> >
> > ----- Original Message -----
> > > From: "Max Gurtovoy" <maxg@xxxxxxxxxxxx>
> > > To: "Laurence Oberman" <loberman@xxxxxxxxxx>, "Leon Romanovsky"
> > > <leonro@xxxxxxxxxxxx>
> > > Cc: "Bart Van Assche" <bart.vanassche@xxxxxxxxxxx>, "Doug Ledford"
> > > <dledford@xxxxxxxxxx>, "Sagi Grimberg"
> > > <sagi@xxxxxxxxxxx>, "Israel Rukshin" <israelr@xxxxxxxxxxxx>,
> > > linux-rdma@xxxxxxxxxxxxxxx
> > > Sent: Wednesday, April 26, 2017 4:31:57 AM
> > > Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
> > > overflows the klms[] array
> > >
> > >
> > >
> > > On 4/25/2017 11:37 PM, Laurence Oberman wrote:
> > > >
> > > >
> > > > ----- Original Message -----
> > > >> From: "Leon Romanovsky" <leonro@xxxxxxxxxxxx>
> > > >> To: "Bart Van Assche" <bart.vanassche@xxxxxxxxxxx>
> > > >> Cc: "Doug Ledford" <dledford@xxxxxxxxxx>, "Max Gurtovoy"
> > > >> <maxg@xxxxxxxxxxxx>, "Sagi Grimberg" <sagi@xxxxxxxxxxx>,
> > > >> "Israel Rukshin" <israelr@xxxxxxxxxxxx>, "Laurence Oberman"
> > > >> <loberman@xxxxxxxxxx>, linux-rdma@xxxxxxxxxxxxxxx
> > > >> Sent: Tuesday, April 25, 2017 1:58:49 PM
> > > >> Subject: Re: [PATCH, untested] mlx5: Avoid that mlx5_ib_sg_to_klms()
> > > >> overflows the klms[] array
> > > >>
> > > >> On Mon, Apr 24, 2017 at 03:15:28PM -0700, Bart Van Assche wrote:
> > > >>> ib_map_mr_sg() can pass an SG-list to .map_mr_sg() that is larger
> > > >>> than what fits into a single MR. .map_mr_sg() must not attempt to
> > > >>> map more SG-list elements than what fits into a single MR.
> > > >>> Hence make sure that mlx5_ib_sg_to_klms() does not write outside
> > > >>> the MR klms[] array.
> > > >>>
> > > >>> Fixes: b005d3164713 ("mlx5: Add arbitrary sg list support")
> > > >>> Signed-off-by: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
> > > >>> Reviewed-by: Max Gurtovoy <maxg@xxxxxxxxxxxx>
> > > >>> Cc: Sagi Grimberg <sagi@xxxxxxxxxxx>
> > > >>> Cc: Leon Romanovsky <leonro@xxxxxxxxxxxx>
> > > >>> Cc: Israel Rukshin <israelr@xxxxxxxxxxxx>
> > > >>> Cc: <stable@xxxxxxxxxxxxxxx>
> > > >>> ---
> > > >>> drivers/infiniband/hw/mlx5/mr.c | 2 +-
> > > >>> 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >>>
> > > >>
> > > >> Bart,
> > > >>
> > > >> Thanks a lot, it indeed looks right.
> > > >> Acked-by: Leon Romanovsky <leonro@xxxxxxxxxxxx>
> > > >>
> > > >> Thanks
> > > >>
> > > >
> > > >
> > > > Hello Bart, Leon, Max and Israel.
> > > >
> > > > I cloned off Barts tree.
> > > >
> > > > git clone https://github.com/bvanassche/linux
> > > > cd linux
> > > > git checkout block-scsi-for-next
> > > >
> > > > I checked all patches were in for this test.
> > > >
> > > > a83e404 IB/srp: Reenable IB_MR_TYPE_SG_GAPS
> > > > dfa5a2b mlx5: Avoid that mlx5_ib_sg_to_klms() overflows the klms[]
> > > > array
> > > > f759c80 mlx5: Fix mlx5_ib_map_mr_sg mr lengt
> > >
> > > Hi,
> > > copying Sagi's request from different thread:
> > >
> > > "
> > > Can you please enable srp_add_one debug:
> > >
> > > echo "func srp_add_one +p" > /sys/kernel/debug/dynamic_debug/control
> > >
> > > In addition apply the following:
> > > --
> > > diff --git a/drivers/infiniband/hw/mlx5/mr.c
> > > b/drivers/infiniband/hw/mlx5/mr.c
> > > index d9c6c0ea750b..040fbc387e4f 100644
> > > --- a/drivers/infiniband/hw/mlx5/mr.c
> > > +++ b/drivers/infiniband/hw/mlx5/mr.c
> > > @@ -1403,6 +1403,8 @@ mlx5_alloc_priv_descs(struct ib_device *device,
> > > int add_size;
> > > int ret;
> > >
> > > + WARN_ON_ONCE(ndescs > device->attr.max_fast_reg_page_list_len);
> > > +
> > > add_size = max_t(int, MLX5_UMR_ALIGN - ARCH_KMALLOC_MINALIGN,
> > > 0);
> > >
> > > mr->descs_alloc = kzalloc(size + add_size, GFP_KERNEL);
> > >
> > > "
> > >
> > > Max.
> > >
> > > >
> > > > Built and tested the kernel.
> > > >
> > > > However this issue is not resolved :(
> > > >
> > > > [ 2707.931909] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > > > for
> > > > CQE ffff8817edca86b0
> > > > [ 2708.089806] mlx5_0:dump_cqe:262:(pid 20129): dump error cqe
> > > > [ 2708.121342] 00000000 00000000 00000000 00000000
> > > > [ 2708.147104] 00000000 00000000 00000000 00000000
> > > > [ 2708.172633] 00000000 00000000 00000000 00000000
> > > > [ 2708.198702] 00000000 0f007806 2500002a 14a527d0
> > > > [ 2732.434127] scsi host1: ib_srp: reconnect succeeded
> > > > [ 2733.048023] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > > > for
> > > > CQE ffff8817ed0a9c30
> > > >
> > > > [root@localhost ~]# [ 2746.413277] mlx5_0:dump_cqe:262:(pid 15877):
> > > > dump
> > > > error cqe
> > > > [ 2746.443240] 00000000 00000000 00000000 00000000
> > > > [ 2746.469323] 00000000 00000000 00000000 00000000
> > > > [ 2746.495310] 00000000 00000000 00000000 00000000
> > > > [ 2746.521407] 00000000 0f007806 25000032 003c7ad0
> > > > [ 2752.445899] scsi host1: ib_srp: reconnect succeeded
> > > > [ 2752.481835] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > > > for
> > > > CQE ffff8817ed0a9cf0
> > > > [ 2763.267386] mlx5_0:dump_cqe:262:(pid 15877): dump error cqe
> > > > [ 2763.297826] 00000000 00000000 00000000 00000000
> > > > [ 2763.323352] 00000000 00000000 00000000 00000000
> > > > [ 2763.348722] 00000000 00000000 00000000 00000000
> > > > [ 2763.374681] 00000000 0f007806 2500003a 00084bd0
> > > >
> > > > [root@localhost ~]# [ 2769.385203] fast_io_fail_tmo expired for SRP
> > > > port-1:1 / host1.
> > > > [ 2769.415956] scsi host1: ib_srp: reconnect succeeded
> > > > [ 2769.450258] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > > > for
> > > > CQE ffff8817ed0a9cf0
> > > > [ 2780.064627] mlx5_0:dump_cqe:262:(pid 18771): dump error cqe
> > > > [ 2780.093520] 00000000 00000000 00000000 00000000
> > > > [ 2780.120067] 00000000 00000000 00000000 00000000
> > > > [ 2780.145575] 00000000 00000000 00000000 00000000
> > > > [ 2780.171153] 00000000 0f007806 25000042 000833d0
> > > > [ 2785.923399] scsi host1: ib_srp: reconnect succeeded
> > > > [ 2785.957504] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > > > for
> > > > CQE ffff8817ed0a9cf0
> > > > [ 2796.463426] mlx5_0:dump_cqe:262:(pid 18771): dump error cqe
> > > > [ 2796.495257] 00000000 00000000 00000000 00000000
> > > > [ 2796.521506] 00000000 00000000 00000000 00000000
> > > > [ 2796.547640] 00000000 00000000 00000000 00000000
> > > > [ 2796.573120] 00000000 0f007806 2500004a 00083bd0
> > > > [ 2802.562578] scsi host1: ib_srp: reconnect succeeded
> > > > [ 2802.596880] scsi host1: ib_srp: failed RECV status WR flushed (5)
> > > > for
> > > > CQE ffff8817ed0a9cf0
> > > >
> > > > Regards
> > > > Laurence
> > > >
> > >
> > Doing this now
> > Thanks
> > Laurence
>
> Max
>
> The Patch is not correct.
>
> drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_alloc_priv_descs':
> drivers/infiniband/hw/mlx5/mr.c:1406:30: error: 'struct ib_device' has no
> member named 'attr'
> WARN_ON_ONCE(ndescs > device->attr.max_fast_reg_page_list_len);
> ^
> ./include/asm-generic/bug.h:117:27: note: in definition of macro
> 'WARN_ON_ONCE'
> int __ret_warn_once = !!(condition); \
>
> I think you meant to give me
>
> WARN_ON_ONCE(ndescs > ib_device_attr->attr.max_fast_reg_page_list_len);
>
> Can you confirm
>
> Thanks
> Laurence
Oops rather this
WARN_ON_ONCE(ndescs > device->ib_device_attr.max_fast_reg_page_list_len);
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
