Hi Sagi, On Mon, Mar 27, 2017 at 4:20 AM, Sagi Grimberg <sagi@xxxxxxxxxxx> wrote: > >> This series introduces IBNBD/IBTRS kernel modules. >> >> IBNBD (InfiniBand network block device) allows for an RDMA transfer of >> block IO >> over InfiniBand network. The driver presents itself as a block device on >> client >> side and transmits the block requests in a zero-copy fashion to the >> server-side >> via InfiniBand. The server part of the driver converts the incoming >> buffers back >> into BIOs and hands them down to the underlying block device. As soon as >> IO >> responses come back from the drive, they are being transmitted back to the >> client. > > > Hi Jack, Danil and Roman, > > I met Danil and Roman last week at Vault, and I think you guys > are awesome, thanks a lot for open-sourcing your work! However, > I have a couple of issues here, some are related to the code and > some are fundamental actually. Thanks for comments and suggestions, reply in inline. > > - Is there room for this ibnbd? If we were to take every block driver > that was submitted without sufficient justification, it'd be very > hard to maintain. What advantage (if any) does this buy anyone over > existing rdma based protocols (srp, iser, nvmf)? I'm really (*really*) > not sold on this one... > > - To me, the fundamental design that the client side owns a pool of > buffers that it issues writes too, seems inferior than the > one taken in iser/nvmf (immediate data). IMO, the ibnbd design has > scalability issues both in terms of server side resources, client > side contention and network congestion (on infiniband the latter is > less severe). > > - I suggest that for your next post, you provide a real-life use-case > where each of the existing drivers can't suffice, and by can't > suffice I mean that it has a fundamental issue with it, not something > that requires a fix. With that our feedback can be much more concrete > and (at least on my behalf) more open to accept it. > > - I'm not exactly sure why you would suggest that your implementation > supports only infiniband if you use rdma_cm for address resolution, > nor I understand why you emphasize feature (2) below, nor why even > in the presence of rdma_cm you have ibtrs_ib_path? (confused...) > iWARP needs a bit more attention if you don't use the new generic > interfaces though... You reminds me, we also tested in rxe drivers in the past, but not iWARP. Might work. ibtrs_ib_path was leftover for APM feature, we used in house, will remove next round. > > - I honestly do not understand why you need *19057* LOC to implement > a rdma based block driver. Thats almost larger than all of our > existing block drivers combined... First glance at the code provides > some explanations, (1) you have some strange code that has no business > in a block driver like ibtrs_malloc/ibtrs_zalloc (yikes) or > open-coding various existing logging routines, (2) you are for some > reason adding a second tag allocation scheme (why?), (3) you are open > coding a lot of stuff that we added to the stack in the past months... > (4) you seem to over-layer your code for reasons that I do not > really understand. And I didn't really look deep at all into the > code, just to get the feel of it, and it seems like it needs a lot > of work before it can even be considered upstream ready. Agree, we will clean up the code further, that's why I sent it RFC to get a early feedback. > >> We design and implement this solution based on our need for Cloud >> Computing, >> the key features are: >> - High throughput and low latency due to: >> 1) Only two rdma messages per IO > > > Where exactly did you witnessed latency that was meaningful by having > another rdma message on the wire? That's only for writes, anyway, and > we have first data bursts for that.. Clearly, we need to benchmark on latest kernel. > >> 2) Simplified client side server memory management >> 3) Eliminated SCSI sublayer > > > That's hardly an advantage given all we are losing without it... > > ... > > Cheers, > Sagi. Thanks, -- Jack Wang Linux Kernel Developer ProfitBricks GmbH Greifswalder Str. 207 D - 10405 Berlin Tel: +49 30 577 008 042 Fax: +49 30 577 008 299 Email: jinpu.wang@xxxxxxxxxxxxxxxx URL: https://www.profitbricks.de Sitz der Gesellschaft: Berlin Registergericht: Amtsgericht Charlottenburg, HRB 125506 B Geschäftsführer: Achim Weiss -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
