On Fri, Mar 03, 2017 at 06:55:11AM -0500, Yi Zhang wrote: > Hi experts > > I reproduced this issue during stress test on reset_controller, could you help check it, thanks. > > Reproduce steps on initiator side: > num=0 > while [ 1 ] > do > echo "-------------------------------$num" > echo 1 >/sys/block/nvme0n1/device/reset_controller || exit 1 > ((num++)) > done > > Here is the full log: > http://pastebin.com/mek9fb0b > > Target side log: > [ 326.411481] nvmet: creating controller 1061 for NQN nqn.2014-08.org.nvmexpress:NVMf:uuid:32413b2b-89cc-4939-b816-399ff293800d. > [ 326.516226] nvmet: adding queue 1 to ctrl 1061. > [ 326.516428] nvmet: adding queue 2 to ctrl 1061. > [ 326.516616] nvmet: adding queue 3 to ctrl 1061. > [ 326.5361ing queue 4 to ctrl 1061. > [ 326.556148] nvmet: adding queue 5 to ctrl 1061. > [ 326.556499] nvmet: adding queue 6 to ctrl 1061. > [ 326.556779] nvmet: adding queue 7 to ctrl 1061. > [ 326.557093] nvmet: adding queue 8 to ctrl 1061. > [ 326.576166] nvmet: adding queue 9 to ctrl 1061. > [ 326.576420] nvmet: adding queue 10 to ctrl 1061. > [ 326.576674] nvmet: adding queue 11 to ctrl 1061. > [ 326.576922] nvmet: adding queue 12 to ctrl 1061. > [ 326.577274] nvmet: adding queue 13 to ctrl 1061. > [ 326.577595] nvmet: adding queue 14 to ctrl 1061. > [ 326.596656] nvmet: adding queue 15 to ctrl 1061. > [ 326.596936] nvmet: adding queue 16 to ctrl 1061. > [ 326.662587] nvmet: creating controller 1062 for NQN nqn.2014-08.org.nvmexpress:NVMf:uuid:32413b2b-89cc-4939-b816-399ff293800d. > [ 326.686765] mlx4_core 0000:07:00.0: swiotlb buffer is full (sz: 532480 bytes) > [ 326.686766] swiotlb: coherent allocation failed for device 0000:07:00.0 size=532480 > [ 326.686768] CPU: 6 PID: 3931 Comm: kworker/6:256 Not tainted 4.10.0 #2 > [ 326.686768] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 12/20/2013 > [ 326.686775] Workqueue: ib_cm cm_work_handler [ib_cm] > [ 326.686776] Call Trace: > [ 326.686781] dump_stack+0x63/0x87 > [ 326.686783]herent+0x14a/0x160 > [ 326.686786] x86_swiotlb_alloc_coherent+0x43/0x50 > [ 326.686795] mlx4_buf_direct_alloc.isra.4+0xb1/0x150 [mlx4_core] > [ 326.686798] mlx4_buf_alloc+0x172/0x1c0 [mlx4_core] > [ 326.686802] create_qp_common.isra.33+0x633/0x1010 [mlx4_ib] > [ 326.686805] ? mlx4_ib_create_qp+0xf7/0x450 [mlx4_ib] > [ 326.686807] mlx4_ib_create_qp+0x149/0x450 [mlx4_ib] > [ 326.686816] ib_create_qp+0x70/0x2b0 [ib_core] > [ 326.686819] rdma_create_qp+0x34/0xa0 [rdma_cm] > [ 326.686823] nvmet_rdma_alloc_queue+0x692/0x900 [nvmet_rdma] > [ 326.686824] ? nvmet_rdma_execute_command+0x100/0x100 [nvmet_rdma] > [ 326.686826] nvmet_rdma_cm_handler+0x1e6/0x708 [nvmet_rdma] > [ 326.686827] ? cma_acquire_dev+0x1e7/0x4b0 [rdma_cm] > [ 326.686829] ? cma_new_conn_id+0xb2/0x4b0 [rdma_cm] > [ 326.686830] ? cma_new_conn_id+0x153/0x4b0 [rdma_cm] > [ 326.686832] cma_req_handler+0x1f5/0x4c0 [rdma_cm] > [ 326.686834] cm_process_work+0x25/0x120 [ib_cm] > [ 326.686835] cm_req_handler+0x994/0xcd0 [ib_cm] > [ 326.686837] cm_work_handler+0x1ce/0x1753 [ib_cm] > [ 326.686839] process_one_work+0x165/0x410 > [ 326.686840] worker_thread+0x137/0x4c0 > [ 326.686841] kthread+0x101/0x140 > [ 326.686842] ? rescuer_thread+0x3b0/0x3b0 > [ 326.686843] ? kthread_park+0x90/0x90 > [ 326.686845] ret_from_fork+0x2c/0x40 > [ 326.691158] mlx4_core 0000:07:00.0: swiotlb buffer is full (sz: 532480 bytes) > [ 326.691158] swiotlb: coherent allocevice 0000:07:00.0 size=532480 > [ 326.691160] CPU: 6 PID: 3931 Comm: kworker/6:256 Not tainted 4.10.0 #2 > [ 326.691160] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 12/20/2013 > [ 326.691163] Workqueue: ib_cm cm_work_handler [ib_cm] > [ 326.691163] Call Trace: > [ 326.691165] dump_stack+0x63/0x87 > [ 326.691167] swiotlb_alloc_coherent+0x14a/0x160 > [ 326.691168] x86_swiotlb_alloc_coherent+0x43/0x50 > [ 326.691173] mlx4_buf_direct_alloc.isra.4+0xb1/0x150 [mlx4_core] > [ 326.691176] mlx4_buf_alloc+0x172/0x1c0 [mlx4_core] > [ 326.691179] create_qp_common.isra.33+0x633/0x1010 [mlx4_ib] > [ 326.691181] mlx4_ib_create_qp+0x149/0x450 [mlx4_ib] > [ 326.691186] ib_create_qp+0x70/0x2b0 [ib_core] > [ 326.691188] rdma_create_qp+0x34/0xa0 [rdma_cm] > [ 326.691190] nvmet_rdma_alloc_queue+0x692/0x900 [nvmet_rdma] > [ 326.691191] ? nvmet_rdma_execute_command+0x100/0x100 [nvmet_rdma] > [ 326.691193] nvmet_rdma_cm_handler+0x1e6/0x708 [nvmet_rdma] > [ 326.691194] ? cma_acquire_dev+0x1e7/0x4b0 [rdma_cm] > [ 326.691196] ? cma_new_conn_id+0xb2/0x4b0 [rdma_cm] > [ 326.691197] ? cma_new_conn_id+0x153/0x4b0 [rdma_cm] > [ 326.691199] cma_req_handler+0x1f5/0x4c0 [rdma_cm] > [ 326.691201] cm_process_work+0x25/0x120 [ib_cm] > [ 326.691202] cm_req_handler+0x994/0xcd0 [ib_cm] > [ 326.691204] cm_work_handler+0x1ce/0x1753 [ib_cm] > [ 326.691205] process_one_work+0x165/0x410 > [ 326.691206] worker_thread+0x137/0x4c0 > [ 326.691207] kthread+0x101/0x140 > [ 326.691209] ? rescuer_thread+0x3b0/0x3b0 > [ 326.691209] ? kthread_park+0x90/0x90 > [ 326.691211] ret_from_fork+0x2c/0x40 > [ 326.695215] mlx4_core 0000:07:00.0: swiotlb buffer is full (sz: 532480 bytes) > [ 326.695216] swiotlb: coherent allocation failed for device 0000:07:00.0 size=532480 > [ 326.695217] CPU: 6 PID: 3931 Comm: kworker/6:256 Not tainted 4.10.0 #2 > [ 326.695217] Hardware name: HP ProLiant DL388p Gen8, BIOS P70 12/20/2013 > [ 326.695219] Workqueue: ib_cm cm_work_handler [ib_cm] > [ 326.695220] Call Trace: > [ 326.695222] dump_stack+0x63/0x87 > [ .695223] swiotlb_alloc_coherent+0x14a/0x160 > [ 326.695224] x86_swiotlb_alloc_coherent+0x43/0x50 > [ 326.695228] mlx4_buf_direct_alloc.isra.4+0xb1/0x150 [mlx4_core] > [ 326.695232] mlx4_buf_alloc+0x172/0x1c0 [mlx4_core] > [ 326.695234] create_qp_common.isra.33+0x633/0x1010 [mlx4_ib] > [ 326.695237] mlx4_ib_create_qp+0x149/0x450 [mlx4_ib] > [ 326.695241] ib_create_qp+0x70/0x2b0 [ib_core] > [ 326.695243] rdma_create_qp+0x34/0xa0 [rdma_cm] > [ 326.695245] nvmet_rdma_alloc_queue+0x692/0x900 [nvmet_rdma] > [ 326.695246] ? nvmet_rdma_execute_command+0x100/0x100 [nvmet_rdma] > [ 326.695247] nvmet_rdma_cm_handler+0x1e6/0x708 [nvmet_rdma] > [ 326.695249] ? cma_acquire_dev+0x1e7/0x4b0 [rdma_cm] > [ 326.695251] ? cma_new_conn_id+0xb2/0x4b0 [rdma_cm] > [ 326.695252] ? cma_new_conn_id+0x153/0x4b0 [rdma_cm] > [ 326.695254] cma_req_handler+0x1f5/0x4c0 [rdma_cm] > [ 326.695256] cm_process_work+0x25/0x120 [ib_cm] > [ 326.695257] cm_req_handler+0x994/0xcd0 [ib_cm] > [ 326.695259] cm_work_handler+0x1ce/0x1753 [ib_cm] > [ 326.695260] process_one_work+0x165/0x410 > [ 326.695261] worker_thread+0x137/0x4c0 > [ 326.695262] kthread+0x101/0x140 > [ 326.695263] ? rescuer_thread+0x3b0/0x3b0 > [ 326.695264] ? kthread_park+0x90/0x90 > [ 3t_from_fork+0x2c/0x40 > > Initiator side log: > [ 532.880043] nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 172.31.2.3:1023 > [ 533.002002] nvme nvme0: creating 16 I/O queues. > [ 533.446540] nvme nvme0: new ctrl: NQN "nvme-subsystem-name", addr 172.31.2.3:1023 > [ 691.641201] nvme nvme0: rdma_resolve_addr wait failed (-110). > [ 691.672089] nvme nvme0: failed to initialize i/o queue: -110 > [ 691.721031] nvme nvme0: Removing after reset failure + Christoph and Sagi. > > > Best Regards, > Yi Zhang > > > > _______________________________________________ > Linux-nvme mailing list > Linux-nvme@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-nvme
Attachment:
signature.asc
Description: PGP signature
