We have some ConnectX-4 Lx cards that I'm trying to test RoCE and iSER on. I downloaded and installed the Mellanox drivers with VMA [0]. I was able to run the ib_read_bw tests over the adapters after installing the infiniband-diags and perftest RPMs. When I went to configure LIO for iSER, I'm getting the message "Cannot change iser" on step 6 in the procedure here [1] which I've done many times with Infiniband without issues. I navigated to /sys/kernel/config/target/iscsi/{iqn}/tpgt_1/np/{portal_ip:port} and sure enough, I can't write '1' into iser. The kernel is not giving any messages and the ib_isert module is loaded. This is on 4.4.27, Mellanox driver 3.4-1.0.0.3 built with `./install --add-kernel-support --skip-repo --tmpdir /root/junk --vma` # mstflint -d 4:00.0 q Image type: FS3 FW Version: 14.16.1020 FW Release Date: 20.6.2016 Rom Info: type=UEFI version=14.10.16 type=PXE version=3.4.812 devid=4117 Description: UID GuidsNumber Base GUID: 0cc47a000089f706 4 Base MAC: 00000cc47a89f706 4 Image VSD: Device VSD: PSID: SM_2001000001034 # ibstatus Infiniband device 'mlx5_0' port 1 status: default gid: fe80:0000:0000:0000:0ec4:7aff:fe89:f706 base lid: 0x0 sm lid: 0x0 state: 4: ACTIVE phys state: 5: LinkUp rate: 25 Gb/sec (1X EDR) link_layer: Ethernet Infiniband device 'mlx5_1' port 1 status: default gid: fe80:0000:0000:0000:0ec4:7aff:fe89:f707 base lid: 0x0 sm lid: 0x0 state: 4: ACTIVE phys state: 5: LinkUp rate: 25 Gb/sec (1X EDR) link_layer: Ethernet Any ideas of what I'm doing wrong here? I don't have any experience with RoCE, so I'm sure I'm doing something wrong. And the manual has nothing about configuring RoCE other than enabling --vma when installing the drivers [2]. Thanks, Robert LeBlanc [0] http://www.mellanox.com/page/products_dyn?product_family=27 [1] https://community.mellanox.com/docs/DOC-1472 [2] http://www.mellanox.com/related-docs/prod_software/Mellanox_EN_for_Linux_User_Manual_v3_40.pdf ---------------- Robert LeBlanc PGP Fingerprint 79A2 9CA4 6CC4 45DD A904 C70E E654 3BB2 FA62 B9F1 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html