Doug, This series adds the capability to read configuration information used to init the link from the EPROM. It partially undoes some of the work that was removed when we removed the user access. This is not done though in support of user access. This is only so the driver can read the EPROM. All user access is still only through resource0. Series applies on previously submitted patches and should apply cleanly to your for-4.9 branch. Can also be seen in GitHub at: https://github.com/ddalessa/kernel/tree/for-4.9 --- Dean Luick (4): IB/hfi1: Restore EPROM read ability IB/hfi1: Change EPROM read for internal use IB/hfi1: Add ability to read platform config from the EPROM IB/hfi1: Use EPROM platform configuration read drivers/infiniband/hw/hfi1/chip.c | 9 +- drivers/infiniband/hw/hfi1/eprom.c | 185 +++++++++++++++++++++++++++++++++ drivers/infiniband/hw/hfi1/eprom.h | 4 - drivers/infiniband/hw/hfi1/file_ops.c | 1 drivers/infiniband/hw/hfi1/platform.c | 32 ++++-- 5 files changed, 213 insertions(+), 18 deletions(-) -- -Denny -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
