From: Daode Huang <huangdaode@xxxxxxxxxxxxx>
When set rx/tx coalesce usecs to 0, the interrupt coalesce will be
disabled, but there is a interrupt rate limit which set to 1us, it
will cause no interrupt occurs. This patch disable interrupt limit
when sets coalsecs usecs to 0, and restores it to 1 in other case.
Signed-off-by: Daode Huang <huangdaode@xxxxxxxxxxxxx>
Reviewed-by: Yisen Zhuang <yisen.zhuang@xxxxxxxxxx>
Signed-off-by: Salil Mehta <salil.mehta@xxxxxxxxxx>
---
drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c | 16 ++++++++++++++++
drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h | 4 ++++
2 files changed, 20 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
index ef11077..f0ed80d6 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
@@ -543,6 +543,22 @@ int hns_rcb_set_coalesce_usecs(
"error: coalesce_usecs setting supports 0~1023us\n");
return -EINVAL;
}
+
+ if (!AE_IS_VER1(rcb_common->dsaf_dev->dsaf_ver)) {
+ if (timeout == 0)
+ /* set timeout to 0, Disable gap time */
+ dsaf_set_reg_field(rcb_common->io_base,
+ RCB_INT_GAP_TIME_REG + port_idx * 4,
+ PPE_INT_GAPTIME_M, PPE_INT_GAPTIME_B,
+ 0);
+ else
+ /* set timeout non 0, restore gap time to 1 */
+ dsaf_set_reg_field(rcb_common->io_base,
+ RCB_INT_GAP_TIME_REG + port_idx * 4,
+ PPE_INT_GAPTIME_M, PPE_INT_GAPTIME_B,
+ 1);
+ }
+
hns_rcb_set_port_timeout(rcb_common, port_idx, timeout);
return 0;
}
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
index 4b8b803..878950a 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_reg.h
@@ -417,6 +417,7 @@
#define RCB_CFG_OVERTIME_REG 0x9300
#define RCB_CFG_PKTLINE_INT_NUM_REG 0x9304
#define RCB_CFG_OVERTIME_INT_NUM_REG 0x9308
+#define RCB_INT_GAP_TIME_REG 0x9400
#define RCB_PORT_CFG_OVERTIME_REG 0x9430
#define RCB_RING_RX_RING_BASEADDR_L_REG 0x00000
@@ -898,6 +899,9 @@
#define PPE_CNT_CLR_CE_B 0
#define PPE_CNT_CLR_SNAP_EN_B 1
+#define PPE_INT_GAPTIME_B 0
+#define PPE_INT_GAPTIME_M 0x3ff
+
#define PPE_COMMON_CNT_CLR_CE_B 0
#define PPE_COMMON_CNT_CLR_SNAP_EN_B 1
#define RCB_COM_TSO_MODE_B 0
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
