On 7/25/2016 11:40 PM, Ming Lin wrote:
On Mon, Jul 25, 2016 at 2:01 AM, Majd Dibbiny <majd@xxxxxxxxxxxx> wrote:
On 7/25/2016 10:28 AM, Ming Lin wrote:
On Mon, Jul 25, 2016 at 12:00 AM, Leon Romanovsky <leonro@xxxxxxxxxxxx>
wrote:
On Thu, Jul 21, 2016 at 03:54:31PM -0700, Ming Lin wrote:
Hi,
I build k.o/for-4.8 branch(commit fb92d8fb1b9). But mlx5 driver doesn't
work.
root@host:~# lspci |grep -i mellanox
03:00.0 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4]
03:00.1 Ethernet controller: Mellanox Technologies MT27700 Family
[ConnectX-4]
root@host:~# dmesg |grep -i mlx5
[ 3.833348] mlx5_core 0000:03:00.0: firmware version: 12.12.1100
[ 4.024478] mlx5_core 0000:03:00.0: enable hca failed
[ 4.260086] mlx5_core 0000:03:00.0: mlx5_load_one failed with error
code -5
[ 4.333568] mlx5_core: probe of 0000:03:00.0 failed with error -5
[ 4.339977] mlx5_core 0000:03:00.1: firmware version: 12.12.1100
[ 4.410366] mlx5_core 0000:03:00.1: enable hca failed
[ 4.562862] mlx5_core 0000:03:00.1: mlx5_load_one failed with error
code -5
Hi Ming,
Did you upgrade the Firmware as well?
It works after upgrading firmware.
Hi Ming,
I didn't mean that you need to upgrade the firmware to make this work.
I wanted to understand if alongside with driver upgrade you did a
firmware upgrade.
Thanks.
Did it work before the kernel upgrade?
Do you work in pass-through mode?
Does cold reboot resolve the issue?
Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html