RoCEv2 is the InfiniBand transport protocol encapsulated in ETH/IP/UDP link and network protocols. The implementation to the IB/core driver was added by Matan Barak as an infrastructure for any vendor driver and this patch set uses it to add RoCEv2 support for ConnectX-3Pro NICs Matan Barak (1): IB/mlx4: Advertise RoCE v2 support Moni Shoua (11): net/mlx4: Query RoCE support IB/mlx4: Add gid_type to GID properties net/mlx4_core: Configure mlx4 hardware for mixed RoCE v1/v2 modes IB/mlx4: Add support for setting RoCEv2 gids in hardware net/mlx4_core: Add support for configuring RoCE v2 UDP port net/mlx4_core: Add support for RoCE v2 entropy IB/core: Add definition for the standard RoCE V2 UDP port IB/mlx4: Support modify_qp for RoCE v2 IB/mlx4: Enable RoCE v2 when the IB device is added IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers IB/mlx4: Create and use another QP1 for RoCEv2 drivers/infiniband/core/ud_header.c | 2 +- drivers/infiniband/hw/mlx4/main.c | 101 ++++++++++-- drivers/infiniband/hw/mlx4/mlx4_ib.h | 8 + drivers/infiniband/hw/mlx4/qp.c | 256 ++++++++++++++++++++++++++---- drivers/net/ethernet/mellanox/mlx4/fw.c | 39 ++++- drivers/net/ethernet/mellanox/mlx4/mlx4.h | 5 +- drivers/net/ethernet/mellanox/mlx4/port.c | 7 + drivers/net/ethernet/mellanox/mlx4/qp.c | 26 +++ include/linux/mlx4/cmd.h | 3 +- include/linux/mlx4/device.h | 11 +- include/linux/mlx4/qp.h | 15 +- include/rdma/ib_pack.h | 4 +- include/rdma/ib_verbs.h | 1 + 13 files changed, 425 insertions(+), 53 deletions(-) -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html