Possible off by one, but mostly the whitespace makes me itch.
Jim was not on the CC list.
On Thu, Dec 17, 2015 at 07:24:15PM -0500, Jubin John wrote:
> From: Jim Snow <jim.m.snow@xxxxxxxxx>
>
> The link state will transition from ARMED to ACTIVE when a non-SC15
> packet arrives, but the driver might not notice the change. With this
> fix, if the slowpath receive interrupt handler sees a non-SC15 packet
> while in the ARMED state, we queue work to call linkstate_active_work
> from process context to promote it to ACTIVE.
>
> Signed-off-by: Jim Snow <jim.m.snow@xxxxxxxxx>
> Signed-off-by: Brendan Cunningham <brendan.cunningham@xxxxxxxxx>
> Reviewed-by: Dean Luick <dean.luick@xxxxxxxxx>
> Signed-off-by: Jubin John <jubin.john@xxxxxxxxx>
> ---
> drivers/staging/rdma/hfi1/chip.c | 5 ++-
> drivers/staging/rdma/hfi1/chip.h | 2 +
> drivers/staging/rdma/hfi1/driver.c | 66 ++++++++++++++++++++++++++++++++++++
> drivers/staging/rdma/hfi1/hfi.h | 12 ++++++
> drivers/staging/rdma/hfi1/init.c | 1 +
> 5 files changed, 84 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/staging/rdma/hfi1/chip.c b/drivers/staging/rdma/hfi1/chip.c
> index 78a5f08..f82b848 100644
> --- a/drivers/staging/rdma/hfi1/chip.c
> +++ b/drivers/staging/rdma/hfi1/chip.c
> @@ -4606,7 +4606,7 @@ static inline void clear_recv_intr(struct hfi1_ctxtdata *rcd)
> }
>
> /* force the receive interrupt */
> -static inline void force_recv_intr(struct hfi1_ctxtdata *rcd)
> +void force_recv_intr(struct hfi1_ctxtdata *rcd)
> {
> write_csr(rcd->dd, CCE_INT_FORCE + (8 * rcd->ireg), rcd->imask);
> }
> @@ -4705,7 +4705,7 @@ u32 read_physical_state(struct hfi1_devdata *dd)
> & DC_DC8051_STS_CUR_STATE_PORT_MASK;
> }
>
> -static u32 read_logical_state(struct hfi1_devdata *dd)
> +u32 read_logical_state(struct hfi1_devdata *dd)
> {
> u64 reg;
>
> @@ -6658,6 +6658,7 @@ int set_link_state(struct hfi1_pportdata *ppd, u32 state)
> ppd->link_enabled = 1;
> }
>
> + set_all_slowpath(ppd->dd);
> ret = set_local_link_attributes(ppd);
> if (ret)
> break;
> diff --git a/drivers/staging/rdma/hfi1/chip.h b/drivers/staging/rdma/hfi1/chip.h
> index d74aed8..620cf08 100644
> --- a/drivers/staging/rdma/hfi1/chip.h
> +++ b/drivers/staging/rdma/hfi1/chip.h
> @@ -691,6 +691,8 @@ u64 read_dev_cntr(struct hfi1_devdata *dd, int index, int vl);
> u64 write_dev_cntr(struct hfi1_devdata *dd, int index, int vl, u64 data);
> u64 read_port_cntr(struct hfi1_pportdata *ppd, int index, int vl);
> u64 write_port_cntr(struct hfi1_pportdata *ppd, int index, int vl, u64 data);
> +u32 read_logical_state(struct hfi1_devdata *dd);
> +void force_recv_intr(struct hfi1_ctxtdata *rcd);
>
> /* Per VL indexes */
> enum {
> diff --git a/drivers/staging/rdma/hfi1/driver.c b/drivers/staging/rdma/hfi1/driver.c
> index 4c52e78..16b1be1 100644
> --- a/drivers/staging/rdma/hfi1/driver.c
> +++ b/drivers/staging/rdma/hfi1/driver.c
> @@ -862,6 +862,15 @@ static inline void set_all_dma_rtail(struct hfi1_devdata *dd)
> &handle_receive_interrupt_dma_rtail;
> }
>
> +void set_all_slowpath(struct hfi1_devdata *dd)
> +{
> + int i;
> +
> + for (i = HFI1_CTRL_CTXT + 1; i < dd->first_user_ctxt; i++)
> + dd->rcd[i]->do_interrupt =
> + &handle_receive_interrupt;
This fits within the 80 character limit.
We start counting from HFI1_CTRL_CTXT + 1 but in receive_interrupt_work()
we start counting from HFI1_CTRL_CTXT. What's the story? It's either a
bug or needs much better documentation.
> +}
> +
> /*
> * handle_receive_interrupt - receive a packet
> * @rcd: the context
> @@ -929,6 +938,27 @@ int handle_receive_interrupt(struct hfi1_ctxtdata *rcd, int thread)
> last = skip_rcv_packet(&packet, thread);
> skip_pkt = 0;
> } else {
> + /* Auto activate link on non-SC15 packet receive */
> + if (unlikely(rcd->ppd->host_link_state ==
> + HLS_UP_ARMED)) {
> + struct work_struct *lsaw =
> + &rcd->ppd->linkstate_active_work;
> + struct hfi1_message_header *hdr =
> + hfi1_get_msgheader(packet.rcd->dd,
> + packet.rhf_addr);
> + if (hdr2sc(hdr, packet.rhf) != 0xf) {
> + int hwstate = read_logical_state(dd);
> +
> + if (hwstate != LSTATE_ACTIVE) {
> + dd_dev_info(dd, "Unexpected link state %d\n",
> + hwstate);
> + } else {
> + queue_work(
> + rcd->ppd->hfi1_wq, lsaw);
> + goto bail;
> + }
> + }
> + }
Can we make this an inline function?
> last = process_rcv_packet(&packet, thread);
> }
>
> @@ -984,6 +1014,42 @@ bail:
> }
>
> /*
> + * We may discover in the interrupt that the hardware link state has
> + * changed from ARMED to ACTIVE (due to the arrival of a non-SC15 packet),
> + * and we need to update the driver's notion of the link state. We cannot
> + * run set_link_state from interrupt context, so we queue this function on
> + * a workqueue.
> + *
> + * We delay the regular interrupt processing until after the state changes
> + * so that the link will be in the correct state by the time any application
> + * we wake up attempts to send a reply to any message it received.
> + * (Subsequent receive interrupts may possibly force the wakeup before we
> + * update the link state.)
> + *
> + * The rcd is freed in hfi1_free_ctxtdata after hfi1_postinit_cleanup invokes
> + * dd->f_cleanup(dd) to disable the interrupt handler and flush workqueues,
> + * so we're safe from use-after-free of the rcd.
> + */
> +void receive_interrupt_work(struct work_struct *work)
> +{
> + struct hfi1_pportdata *ppd =
> + container_of(work, struct hfi1_pportdata, linkstate_active_work);
Normally we would put mostly on the first line.
struct hfi1_pportdata *ppd = container_of(work, struct hfi1_pportdata,
linkstate_active_work);
> + struct hfi1_devdata *dd = ppd->dd;
> + int i;
> +
> + /* Received non-SC15 packet implies neighbor_normal */
> + ppd->neighbor_normal = 1;
> + set_link_state(ppd, HLS_UP_ACTIVE);
> +
> + /*
> + * Interrupt all kernel contexts that could have had an
> + * interrupt during auto activation.
Remove the extra space before "interrupt".
> + */
> + for (i = HFI1_CTRL_CTXT; i < dd->first_user_ctxt; i++)
> + force_recv_intr(dd->rcd[i]);
> +}
> +
> +/*
> * Convert a given MTU size to the on-wire MAD packet enumeration.
> * Return -1 if the size is invalid.
> */
> diff --git a/drivers/staging/rdma/hfi1/hfi.h b/drivers/staging/rdma/hfi1/hfi.h
> index 54ed6b3..bfd9723 100644
> --- a/drivers/staging/rdma/hfi1/hfi.h
> +++ b/drivers/staging/rdma/hfi1/hfi.h
> @@ -712,6 +712,7 @@ struct hfi1_pportdata {
> u8 remote_link_down_reason;
> /* Error events that will cause a port bounce. */
> u32 port_error_action;
> + struct work_struct linkstate_active_work;
> };
>
> typedef int (*rhf_rcv_function_ptr)(struct hfi1_packet *packet);
> @@ -1128,6 +1129,7 @@ void hfi1_free_ctxtdata(struct hfi1_devdata *, struct hfi1_ctxtdata *);
> int handle_receive_interrupt(struct hfi1_ctxtdata *, int);
> int handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata *, int);
> int handle_receive_interrupt_dma_rtail(struct hfi1_ctxtdata *, int);
> +void set_all_slowpath(struct hfi1_devdata *dd);
>
> /* receive packet handler dispositions */
> #define RCV_PKT_OK 0x0 /* keep going */
> @@ -1148,6 +1150,16 @@ static inline u32 driver_lstate(struct hfi1_pportdata *ppd)
> return ppd->lstate; /* use the cached value */
> }
>
> +void receive_interrupt_work(struct work_struct *work);
> +
> +/* extract service channel from header and rhf */
> +static inline int hdr2sc(struct hfi1_message_header *hdr, u64 rhf)
> +{
> + return
> + ((be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf) |
> + ((!!(rhf & RHF_DC_INFO_MASK)) << 4);
This should be:
return ((be16_to_cpu(hdr->lrh[0]) >> 12) & 0xf) |
((!!(rhf & RHF_DC_INFO_MASK)) << 4);
> +}
> +
> static inline u16 generate_jkey(kuid_t uid)
> {
> return from_kuid(current_user_ns(), uid) & 0xffff;
> diff --git a/drivers/staging/rdma/hfi1/init.c b/drivers/staging/rdma/hfi1/init.c
> index 8f13d53..ee206ae 100644
> --- a/drivers/staging/rdma/hfi1/init.c
> +++ b/drivers/staging/rdma/hfi1/init.c
> @@ -498,6 +498,7 @@ void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd,
> INIT_WORK(&ppd->link_downgrade_work, handle_link_downgrade);
> INIT_WORK(&ppd->sma_message_work, handle_sma_message);
> INIT_WORK(&ppd->link_bounce_work, handle_link_bounce);
> + INIT_WORK(&ppd->linkstate_active_work, receive_interrupt_work);
> mutex_init(&ppd->hls_lock);
> spin_lock_init(&ppd->sdma_alllock);
> spin_lock_init(&ppd->qsfp_info.qsfp_lock);
> --
> 1.7.1
>
> _______________________________________________
> devel mailing list
> devel@xxxxxxxxxxxxxxxxxxxxxx
> http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
