Signed-off-by: Andrew Friedley <andrew.friedley@xxxxxxxxx>
Signed-off-by: Arthur Kepner <arthur.kepner@xxxxxxxxx>
Signed-off-by: Brendan Cunningham <brendan.cunningham@xxxxxxxxx>
Signed-off-by: Brian Welty <brian.welty@xxxxxxxxx>
Signed-off-by: Caz Yokoyama <caz.yokoyama@xxxxxxxxx>
Signed-off-by: Dean Luick <dean.luick@xxxxxxxxx>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@xxxxxxxxx>
Signed-off-by: Easwar Hariharan <easwar.hariharan@xxxxxxxxx>
Signed-off-by: Harish Chegondi <harish.chegondi@xxxxxxxxx>
Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx>
Signed-off-by: Jim Snow <jim.m.snow@xxxxxxxxx>
Signed-off-by: John Gregor <john.a.gregor@xxxxxxxxx>
Signed-off-by: Jubin John <jubin.john@xxxxxxxxx>
Signed-off-by: Kaike Wan <kaike.wan@xxxxxxxxx>
Signed-off-by: Kevin Pine <kevin.pine@xxxxxxxxx>
Signed-off-by: Kyle Liddell <kyle.liddell@xxxxxxxxx>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@xxxxxxxxx>
Signed-off-by: Mitko Haralanov <mitko.haralanov@xxxxxxxxx>
Signed-off-by: Ravi Krishnaswamy <ravi.krishnaswamy@xxxxxxxxx>
Signed-off-by: Sadanand Warrier <sadanand.warrier@xxxxxxxxx>
Signed-off-by: Sanath Kumar <sanath.s.kumar@xxxxxxxxx>
Signed-off-by: Sudeep Dutt <sudeep.dutt@xxxxxxxxx>
Signed-off-by: Vlad Danushevsky <vladimir.danusevsky@xxxxxxxxx>
---
drivers/infiniband/hw/hfi1/chip.c | 2613 +++++++++++++++++++++++++++++++++++++
1 file changed, 2613 insertions(+)
diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c
index 7019499..bf40a14 100644
--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -8011,3 +8011,2616 @@ static int init_cntrs(struct hfi1_devdata *dd)
}
}
+ /* allocate space for the counter values */
+ dd->cntrs = kcalloc(index, sizeof(u64), GFP_KERNEL);
+ if (!dd->cntrs)
+ goto bail;
+
+ dd->scntrs = kcalloc(index, sizeof(u64), GFP_KERNEL);
+ if (!dd->scntrs)
+ goto bail;
+
+
+ /* allocate space for the counter names */
+ dd->cntrnameslen = sz;
+ dd->cntrnames = kmalloc(sz, GFP_KERNEL);
+ if (!dd->cntrnames)
+ goto bail;
+
+ /* fill in the names */
+ for (p = dd->cntrnames, i = 0, index = 0; i < DEV_CNTR_LAST; i++) {
+ if (dev_cntrs[i].flags & CNTR_DISABLED) {
+ /* Nothing */
+ } else {
+ if (dev_cntrs[i].flags & CNTR_VL) {
+ for (j = 0; j < C_VL_COUNT; j++) {
+ memset(name, '\0', C_MAX_NAME);
+ snprintf(name, C_MAX_NAME, "%s%d",
+ dev_cntrs[i].name,
+ vl_from_idx(j));
+ memcpy(p, name, strlen(name));
+ p += strlen(name);
+ *p++ = '\n';
+ }
+ } else {
+ memcpy(p, dev_cntrs[i].name,
+ strlen(dev_cntrs[i].name));
+ p += strlen(dev_cntrs[i].name);
+ *p++ = '\n';
+ }
+ index++;
+ }
+ }
+
+ /*********************/
+ /* per port counters */
+ /*********************/
+
+ /*
+ * Go through the counters for the overflows and disable the ones we
+ * don't need. This varies based on platform so we need to do it
+ * dynamically here.
+ */
+ rcv_ctxts = dd->num_rcv_contexts;
+ for (i = C_RCV_HDR_OVF_FIRST + rcv_ctxts;
+ i <= C_RCV_HDR_OVF_LAST; i++) {
+ port_cntrs[i].flags |= CNTR_DISABLED;
+ }
+
+ /* size port counter names and determine how many we have*/
+ sz = 0;
+ dd->nportcntrs = 0;
+ for (i = 0; i < PORT_CNTR_LAST; i++) {
+ hfi1_dbg_early("Init pcntr %s\n", port_cntrs[i].name);
+ if (port_cntrs[i].flags & CNTR_DISABLED) {
+ hfi1_dbg_early("\tSkipping %s\n", port_cntrs[i].name);
+ continue;
+ }
+
+ if (port_cntrs[i].flags & CNTR_VL) {
+ hfi1_dbg_early("\tProcessing VL cntr\n");
+ port_cntrs[i].offset = dd->nportcntrs;
+ for (j = 0; j < C_VL_COUNT; j++) {
+ memset(name, '\0', C_MAX_NAME);
+ snprintf(name, C_MAX_NAME, "%s%d",
+ port_cntrs[i].name,
+ vl_from_idx(j));
+ sz += strlen(name);
+ sz++;
+ hfi1_dbg_early("\t\t%s\n", name);
+ dd->nportcntrs++;
+ }
+ } else {
+ /* +1 for newline */
+ sz += strlen(port_cntrs[i].name) + 1;
+ port_cntrs[i].offset = dd->nportcntrs;
+ dd->nportcntrs++;
+ hfi1_dbg_early("\tAdding %s\n", port_cntrs[i].name);
+ }
+ }
+
+ /* allocate space for the counter names */
+ dd->portcntrnameslen = sz;
+ dd->portcntrnames = kmalloc(sz, GFP_KERNEL);
+ if (!dd->portcntrnames)
+ goto bail;
+
+ /* fill in port cntr names */
+ for (p = dd->portcntrnames, i = 0; i < PORT_CNTR_LAST; i++) {
+ if (port_cntrs[i].flags & CNTR_DISABLED)
+ continue;
+
+ if (port_cntrs[i].flags & CNTR_VL) {
+ for (j = 0; j < C_VL_COUNT; j++) {
+ memset(name, '\0', C_MAX_NAME);
+ snprintf(name, C_MAX_NAME, "%s%d",
+ port_cntrs[i].name,
+ vl_from_idx(j));
+ memcpy(p, name, strlen(name));
+ p += strlen(name);
+ *p++ = '\n';
+ }
+ } else {
+ memcpy(p, port_cntrs[i].name,
+ strlen(port_cntrs[i].name));
+ p += strlen(port_cntrs[i].name);
+ *p++ = '\n';
+ }
+ }
+
+ /* allocate per port storage for counter values */
+ ppd = (struct hfi1_pportdata *)(dd + 1);
+ for (i = 0; i < dd->num_pports; i++, ppd++) {
+ ppd->cntrs = kcalloc(dd->nportcntrs, sizeof(u64), GFP_KERNEL);
+ if (!ppd->cntrs)
+ goto bail;
+
+ ppd->scntrs = kcalloc(dd->nportcntrs, sizeof(u64), GFP_KERNEL);
+ if (!ppd->scntrs)
+ goto bail;
+ }
+
+ /* CPU counters need to be allocated and zeroed */
+ if (init_cpu_counters(dd))
+ goto bail;
+
+ mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME);
+ return 0;
+bail:
+ free_cntrs(dd);
+ return -ENOMEM;
+}
+
+
+static u32 chip_to_opa_lstate(struct hfi1_devdata *dd, u32 chip_lstate)
+{
+ switch (chip_lstate) {
+ default:
+ dd_dev_err(dd,
+ "Unknown logical state 0x%x, reporting IB_PORT_DOWN\n",
+ chip_lstate);
+ /* fall through */
+ case LSTATE_DOWN:
+ return IB_PORT_DOWN;
+ case LSTATE_INIT:
+ return IB_PORT_INIT;
+ case LSTATE_ARMED:
+ return IB_PORT_ARMED;
+ case LSTATE_ACTIVE:
+ return IB_PORT_ACTIVE;
+ }
+}
+
+static u32 chip_to_opa_pstate(struct hfi1_devdata *dd, u32 chip_pstate)
+{
+ /* look at the HFI meta-states only */
+ switch (chip_pstate & 0xf0) {
+ default:
+ dd_dev_err(dd, "Unexpected chip physical state of 0x%x\n",
+ chip_pstate);
+ /* fall through */
+ case PLS_DISABLED:
+ return IB_PORTPHYSSTATE_DISABLED;
+ case PLS_OFFLINE:
+ return OPA_PORTPHYSSTATE_OFFLINE;
+ case PLS_POLLING:
+ return IB_PORTPHYSSTATE_POLLING;
+ case PLS_CONFIGPHY:
+ return IB_PORTPHYSSTATE_TRAINING;
+ case PLS_LINKUP:
+ return IB_PORTPHYSSTATE_LINKUP;
+ case PLS_PHYTEST:
+ return IB_PORTPHYSSTATE_PHY_TEST;
+ }
+}
+
+/* return the OPA port logical state name */
+static const char *opa_lstate_name(u32 lstate)
+{
+ static const char * const port_logical_names[] = {
+ "PORT_NOP",
+ "PORT_DOWN",
+ "PORT_INIT",
+ "PORT_ARMED",
+ "PORT_ACTIVE",
+ "PORT_ACTIVE_DEFER",
+ };
+ if (lstate < ARRAY_SIZE(port_logical_names))
+ return port_logical_names[lstate];
+ return "unknown";
+}
+
+/* return the OPA port physical state name */
+static const char *opa_pstate_name(u32 pstate)
+{
+ static const char * const port_physical_names[] = {
+ "PHYS_NOP",
+ "reserved1",
+ "PHYS_POLL",
+ "PHYS_DISABLED",
+ "PHYS_TRAINING",
+ "PHYS_LINKUP",
+ "PHYS_LINK_ERR_RECOVER",
+ "PHYS_PHY_TEST",
+ "reserved8",
+ "PHYS_OFFLINE",
+ "PHYS_GANGED",
+ "PHYS_TEST",
+ };
+ if (pstate < ARRAY_SIZE(port_physical_names))
+ return port_physical_names[pstate];
+ return "unknown";
+}
+
+/*
+ * Read the hardware link state and set the driver's cached value of it.
+ * Return the (new) current value.
+ */
+static u32 get_logical_state(struct hfi1_pportdata *ppd)
+{
+ u32 new_state;
+
+ new_state = chip_to_opa_lstate(ppd->dd, read_logical_state(ppd->dd));
+ if (new_state != ppd->lstate) {
+ dd_dev_info(ppd->dd, "logical state changed to %s (0x%x)\n",
+ opa_lstate_name(new_state), new_state);
+ ppd->lstate = new_state;
+ }
+ /*
+ * Set port status flags in the page mapped into userspace
+ * memory. Do it here to ensure a reliable state - this is
+ * the only function called by all state handling code.
+ * Always set the flags due to the fact that the cache value
+ * might have been changed explicitly outside of this
+ * function.
+ */
+ if (ppd->statusp) {
+ switch (ppd->lstate) {
+ case IB_PORT_DOWN:
+ case IB_PORT_INIT:
+ *ppd->statusp &= ~(HFI1_STATUS_IB_CONF |
+ HFI1_STATUS_IB_READY);
+ break;
+ case IB_PORT_ARMED:
+ *ppd->statusp |= HFI1_STATUS_IB_CONF;
+ break;
+ case IB_PORT_ACTIVE:
+ *ppd->statusp |= HFI1_STATUS_IB_READY;
+ break;
+ }
+ }
+ return ppd->lstate;
+}
+
+/**
+ * wait_logical_linkstate - wait for an IB link state change to occur
+ * @ppd: port device
+ * @state: the state to wait for
+ * @msecs: the number of milliseconds to wait
+ *
+ * Wait up to msecs milliseconds for IB link state change to occur.
+ * For now, take the easy polling route.
+ * Returns 0 if state reached, otherwise -ETIMEDOUT.
+ */
+static int wait_logical_linkstate(struct hfi1_pportdata *ppd, u32 state,
+ int msecs)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(msecs);
+ while (1) {
+ if (get_logical_state(ppd) == state)
+ return 0;
+ if (time_after(jiffies, timeout))
+ break;
+ msleep(20);
+ }
+ dd_dev_err(ppd->dd, "timeout waiting for link state 0x%x\n", state);
+
+ return -ETIMEDOUT;
+}
+
+u8 hfi1_ibphys_portstate(struct hfi1_pportdata *ppd)
+{
+ static u32 remembered_state = 0xff;
+ u32 pstate;
+ u32 ib_pstate;
+
+ pstate = read_physical_state(ppd->dd);
+ ib_pstate = chip_to_opa_pstate(ppd->dd, pstate);
+ if (remembered_state != ib_pstate) {
+ dd_dev_info(ppd->dd,
+ "%s: physical state changed to %s (0x%x), phy 0x%x\n",
+ __func__, opa_pstate_name(ib_pstate), ib_pstate,
+ pstate);
+ remembered_state = ib_pstate;
+ }
+ return ib_pstate;
+}
+
+/*
+ * Read/modify/write ASIC_QSFP register bits as selected by mask
+ * data: 0 or 1 in the positions depending on what needs to be written
+ * dir: 0 for read, 1 for write
+ * mask: select by setting
+ * I2CCLK (bit 0)
+ * I2CDATA (bit 1)
+ */
+u64 hfi1_gpio_mod(struct hfi1_devdata *dd, u32 target, u32 data, u32 dir,
+ u32 mask)
+{
+ u64 qsfp_oe, target_oe;
+
+ target_oe = target ? ASIC_QSFP2_OE : ASIC_QSFP1_OE;
+ if (mask) {
+ /* We are writing register bits, so lock access */
+ dir &= mask;
+ data &= mask;
+
+ qsfp_oe = read_csr(dd, target_oe);
+ qsfp_oe = (qsfp_oe & ~(u64)mask) | (u64)dir;
+ write_csr(dd, target_oe, qsfp_oe);
+ }
+ /* We are exclusively reading bits here, but it is unlikely
+ * we'll get valid data when we set the direction of the pin
+ * in the same call, so read should call this function again
+ * to get valid data
+ */
+ return read_csr(dd, target ? ASIC_QSFP2_IN : ASIC_QSFP1_IN);
+}
+
+#define CLEAR_STATIC_RATE_CONTROL_SMASK(r) \
+(r &= ~SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK)
+
+#define SET_STATIC_RATE_CONTROL_SMASK(r) \
+(r |= SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK)
+
+int hfi1_init_ctxt(struct send_context *sc)
+{
+ if (sc != NULL) {
+ struct hfi1_devdata *dd = sc->dd;
+ u64 reg;
+ u8 set = (sc->type == SC_USER ?
+ HFI1_CAP_IS_USET(STATIC_RATE_CTRL) :
+ HFI1_CAP_IS_KSET(STATIC_RATE_CTRL));
+ reg = read_kctxt_csr(dd, sc->hw_context,
+ SEND_CTXT_CHECK_ENABLE);
+ if (set)
+ CLEAR_STATIC_RATE_CONTROL_SMASK(reg);
+ else
+ SET_STATIC_RATE_CONTROL_SMASK(reg);
+ write_kctxt_csr(dd, sc->hw_context,
+ SEND_CTXT_CHECK_ENABLE, reg);
+ }
+ return 0;
+}
+
+int hfi1_tempsense_rd(struct hfi1_devdata *dd, struct hfi1_temp *temp)
+{
+ int ret = 0;
+ u64 reg;
+
+ if (dd->icode != ICODE_RTL_SILICON) {
+ if (HFI1_CAP_IS_KSET(PRINT_UNIMPL))
+ dd_dev_info(dd, "%s: tempsense not supported by HW\n",
+ __func__);
+ return -EINVAL;
+ }
+ reg = read_csr(dd, ASIC_STS_THERM);
+ temp->curr = ((reg >> ASIC_STS_THERM_CURR_TEMP_SHIFT) &
+ ASIC_STS_THERM_CURR_TEMP_MASK);
+ temp->lo_lim = ((reg >> ASIC_STS_THERM_LO_TEMP_SHIFT) &
+ ASIC_STS_THERM_LO_TEMP_MASK);
+ temp->hi_lim = ((reg >> ASIC_STS_THERM_HI_TEMP_SHIFT) &
+ ASIC_STS_THERM_HI_TEMP_MASK);
+ temp->crit_lim = ((reg >> ASIC_STS_THERM_CRIT_TEMP_SHIFT) &
+ ASIC_STS_THERM_CRIT_TEMP_MASK);
+ /* triggers is a 3-bit value - 1 bit per trigger. */
+ temp->triggers = (u8)((reg >> ASIC_STS_THERM_LOW_SHIFT) & 0x7);
+
+ return ret;
+}
+
+/* ========================================================================= */
+
+/*
+ * Enable/disable chip from delivering interrupts.
+ */
+void set_intr_state(struct hfi1_devdata *dd, u32 enable)
+{
+ int i;
+
+ /*
+ * In HFI, the mask needs to be 1 to allow interrupts.
+ */
+ if (enable) {
+ u64 cce_int_mask;
+ const int qsfp1_int_smask = QSFP1_INT % 64;
+ const int qsfp2_int_smask = QSFP2_INT % 64;
+
+ /* enable all interrupts */
+ for (i = 0; i < CCE_NUM_INT_CSRS; i++)
+ write_csr(dd, CCE_INT_MASK + (8*i), ~(u64)0);
+
+ /*
+ * disable QSFP1 interrupts for HFI1, QSFP2 interrupts for HFI0
+ * Qsfp1Int and Qsfp2Int are adjacent bits in the same CSR,
+ * therefore just one of QSFP1_INT/QSFP2_INT can be used to find
+ * the index of the appropriate CSR in the CCEIntMask CSR array
+ */
+ cce_int_mask = read_csr(dd, CCE_INT_MASK +
+ (8*(QSFP1_INT/64)));
+ if (dd->hfi1_id) {
+ cce_int_mask &= ~((u64)1 << qsfp1_int_smask);
+ write_csr(dd, CCE_INT_MASK + (8*(QSFP1_INT/64)),
+ cce_int_mask);
+ } else {
+ cce_int_mask &= ~((u64)1 << qsfp2_int_smask);
+ write_csr(dd, CCE_INT_MASK + (8*(QSFP2_INT/64)),
+ cce_int_mask);
+ }
+ } else {
+ for (i = 0; i < CCE_NUM_INT_CSRS; i++)
+ write_csr(dd, CCE_INT_MASK + (8*i), 0ull);
+ }
+}
+
+/*
+ * Clear all interrupt sources on the chip.
+ */
+static void clear_all_interrupts(struct hfi1_devdata *dd)
+{
+ int i;
+
+ for (i = 0; i < CCE_NUM_INT_CSRS; i++)
+ write_csr(dd, CCE_INT_CLEAR + (8*i), ~(u64)0);
+
+ write_csr(dd, CCE_ERR_CLEAR, ~(u64)0);
+ write_csr(dd, MISC_ERR_CLEAR, ~(u64)0);
+ write_csr(dd, RCV_ERR_CLEAR, ~(u64)0);
+ write_csr(dd, SEND_ERR_CLEAR, ~(u64)0);
+ write_csr(dd, SEND_PIO_ERR_CLEAR, ~(u64)0);
+ write_csr(dd, SEND_DMA_ERR_CLEAR, ~(u64)0);
+ write_csr(dd, SEND_EGRESS_ERR_CLEAR, ~(u64)0);
+ for (i = 0; i < dd->chip_send_contexts; i++)
+ write_kctxt_csr(dd, i, SEND_CTXT_ERR_CLEAR, ~(u64)0);
+ for (i = 0; i < dd->chip_sdma_engines; i++)
+ write_kctxt_csr(dd, i, SEND_DMA_ENG_ERR_CLEAR, ~(u64)0);
+
+ write_csr(dd, DCC_ERR_FLG_CLR, ~(u64)0);
+ write_csr(dd, DC_LCB_ERR_CLR, ~(u64)0);
+ write_csr(dd, DC_DC8051_ERR_CLR, ~(u64)0);
+}
+
+/* Move to pcie.c? */
+static void disable_intx(struct pci_dev *pdev)
+{
+ pci_intx(pdev, 0);
+}
+
+static void clean_up_interrupts(struct hfi1_devdata *dd)
+{
+ int i;
+
+ /* remove irqs - must happen before disabling/turning off */
+ if (dd->num_msix_entries) {
+ /* MSI-X */
+ struct hfi1_msix_entry *me = dd->msix_entries;
+
+ for (i = 0; i < dd->num_msix_entries; i++, me++) {
+ if (me->arg == NULL) /* => no irq, no affinity */
+ break;
+ irq_set_affinity_hint(dd->msix_entries[i].msix.vector,
+ NULL);
+ free_irq(me->msix.vector, me->arg);
+ }
+ } else {
+ /* INTx */
+ if (dd->requested_intx_irq) {
+ free_irq(dd->pcidev->irq, dd);
+ dd->requested_intx_irq = 0;
+ }
+ }
+
+ /* turn off interrupts */
+ if (dd->num_msix_entries) {
+ /* MSI-X */
+ hfi1_nomsix(dd);
+ } else {
+ /* INTx */
+ disable_intx(dd->pcidev);
+ }
+
+ /* clean structures */
+ for (i = 0; i < dd->num_msix_entries; i++)
+ free_cpumask_var(dd->msix_entries[i].mask);
+ kfree(dd->msix_entries);
+ dd->msix_entries = NULL;
+ dd->num_msix_entries = 0;
+}
+
+/*
+ * Remap the interrupt source from the general handler to the given MSI-X
+ * interrupt.
+ */
+static void remap_intr(struct hfi1_devdata *dd, int isrc, int msix_intr)
+{
+ u64 reg;
+ int m, n;
+
+ /* clear from the handled mask of the general interrupt */
+ m = isrc / 64;
+ n = isrc % 64;
+ dd->gi_mask[m] &= ~((u64)1 << n);
+
+ /* direct the chip source to the given MSI-X interrupt */
+ m = isrc / 8;
+ n = isrc % 8;
+ reg = read_csr(dd, CCE_INT_MAP + (8*m));
+ reg &= ~((u64)0xff << (8*n));
+ reg |= ((u64)msix_intr & 0xff) << (8*n);
+ write_csr(dd, CCE_INT_MAP + (8*m), reg);
+}
+
+static void remap_sdma_interrupts(struct hfi1_devdata *dd,
+ int engine, int msix_intr)
+{
+ /*
+ * SDMA engine interrupt sources grouped by type, rather than
+ * engine. Per-engine interrupts are as follows:
+ * SDMA
+ * SDMAProgress
+ * SDMAIdle
+ */
+ remap_intr(dd, IS_SDMA_START + 0*TXE_NUM_SDMA_ENGINES + engine,
+ msix_intr);
+ remap_intr(dd, IS_SDMA_START + 1*TXE_NUM_SDMA_ENGINES + engine,
+ msix_intr);
+ remap_intr(dd, IS_SDMA_START + 2*TXE_NUM_SDMA_ENGINES + engine,
+ msix_intr);
+}
+
+static void remap_receive_available_interrupt(struct hfi1_devdata *dd,
+ int rx, int msix_intr)
+{
+ remap_intr(dd, IS_RCVAVAIL_START + rx, msix_intr);
+}
+
+static int request_intx_irq(struct hfi1_devdata *dd)
+{
+ int ret;
+
+ snprintf(dd->intx_name, sizeof(dd->intx_name), DRIVER_NAME"%d",
+ dd->unit);
+ ret = request_irq(dd->pcidev->irq, general_interrupt,
+ IRQF_SHARED, dd->intx_name, dd);
+ if (ret)
+ dd_dev_err(dd, "unable to request INTx interrupt, err %d\n",
+ ret);
+ else
+ dd->requested_intx_irq = 1;
+ return ret;
+}
+
+static int request_msix_irqs(struct hfi1_devdata *dd)
+{
+ const struct cpumask *local_mask;
+ cpumask_var_t def, rcv;
+ bool def_ret, rcv_ret;
+ int first_general, last_general;
+ int first_sdma, last_sdma;
+ int first_rx, last_rx;
+ int first_cpu, restart_cpu, curr_cpu;
+ int rcv_cpu, sdma_cpu;
+ int i, ret = 0, possible;
+ int ht;
+
+ /* calculate the ranges we are going to use */
+ first_general = 0;
+ first_sdma = last_general = first_general + 1;
+ first_rx = last_sdma = first_sdma + dd->num_sdma;
+ last_rx = first_rx + dd->n_krcv_queues;
+
+ /*
+ * Interrupt affinity.
+ *
+ * non-rcv avail gets a default mask that
+ * starts as possible cpus with threads reset
+ * and each rcv avail reset.
+ *
+ * rcv avail gets node relative 1 wrapping back
+ * to the node relative 1 as necessary.
+ *
+ */
+ local_mask = cpumask_of_pcibus(dd->pcidev->bus);
+ /* if first cpu is invalid, use NUMA 0 */
+ if (cpumask_first(local_mask) >= nr_cpu_ids)
+ local_mask = topology_core_cpumask(0);
+
+ def_ret = zalloc_cpumask_var(&def, GFP_KERNEL);
+ rcv_ret = zalloc_cpumask_var(&rcv, GFP_KERNEL);
+ if (!def_ret || !rcv_ret)
+ goto bail;
+ /* use local mask as default */
+ cpumask_copy(def, local_mask);
+ possible = cpumask_weight(def);
+ /* disarm threads from default */
+ ht = cpumask_weight(cpu_sibling_mask(cpumask_first(local_mask)));
+ for (i = possible/ht; i < possible; i++)
+ cpumask_clear_cpu(i, def);
+ /* reset possible */
+ possible = cpumask_weight(def);
+ /* def now has full cores on chosen node*/
+ first_cpu = cpumask_first(def);
+ if (nr_cpu_ids >= first_cpu)
+ first_cpu++;
+ restart_cpu = first_cpu;
+ curr_cpu = restart_cpu;
+
+ for (i = first_cpu; i < dd->n_krcv_queues + first_cpu; i++) {
+ cpumask_clear_cpu(curr_cpu, def);
+ cpumask_set_cpu(curr_cpu, rcv);
+ if (curr_cpu >= possible)
+ curr_cpu = restart_cpu;
+ else
+ curr_cpu++;
+ }
+ /* def mask has non-rcv, rcv has recv mask */
+ rcv_cpu = cpumask_first(rcv);
+ sdma_cpu = cpumask_first(def);
+
+ /*
+ * Sanity check - the code expects all SDMA chip source
+ * interrupts to be in the same CSR, starting at bit 0. Verify
+ * that this is true by checking the bit location of the start.
+ */
+ BUILD_BUG_ON(IS_SDMA_START % 64);
+
+ for (i = 0; i < dd->num_msix_entries; i++) {
+ struct hfi1_msix_entry *me = &dd->msix_entries[i];
+ const char *err_info;
+ irq_handler_t handler;
+ void *arg;
+ int idx;
+ struct hfi1_ctxtdata *rcd = NULL;
+ struct sdma_engine *sde = NULL;
+
+ /* obtain the arguments to request_irq */
+ if (first_general <= i && i < last_general) {
+ idx = i - first_general;
+ handler = general_interrupt;
+ arg = dd;
+ snprintf(me->name, sizeof(me->name),
+ DRIVER_NAME"%d", dd->unit);
+ err_info = "general";
+ } else if (first_sdma <= i && i < last_sdma) {
+ idx = i - first_sdma;
+ sde = &dd->per_sdma[idx];
+ handler = sdma_interrupt;
+ arg = sde;
+ snprintf(me->name, sizeof(me->name),
+ DRIVER_NAME"%d sdma%d", dd->unit, idx);
+ err_info = "sdma";
+ remap_sdma_interrupts(dd, idx, i);
+ } else if (first_rx <= i && i < last_rx) {
+ idx = i - first_rx;
+ rcd = dd->rcd[idx];
+ /* no interrupt if no rcd */
+ if (!rcd)
+ continue;
+ /*
+ * Set the interrupt register and mask for this
+ * context's interrupt.
+ */
+ rcd->ireg = (IS_RCVAVAIL_START+idx) / 64;
+ rcd->imask = ((u64)1) <<
+ ((IS_RCVAVAIL_START+idx) % 64);
+ handler = receive_context_interrupt;
+ arg = rcd;
+ snprintf(me->name, sizeof(me->name),
+ DRIVER_NAME"%d kctxt%d", dd->unit, idx);
+ err_info = "receive context";
+ remap_receive_available_interrupt(dd, idx, i);
+ } else {
+ /* not in our expected range - complain, then
+ ignore it */
+ dd_dev_err(dd,
+ "Unexpected extra MSI-X interrupt %d\n", i);
+ continue;
+ }
+ /* no argument, no interrupt */
+ if (arg == NULL)
+ continue;
+ /* make sure the name is terminated */
+ me->name[sizeof(me->name)-1] = 0;
+
+ ret = request_irq(me->msix.vector, handler, 0, me->name, arg);
+ if (ret) {
+ dd_dev_err(dd,
+ "unable to allocate %s interrupt, vector %d, index %d, err %d\n",
+ err_info, me->msix.vector, idx, ret);
+ return ret;
+ }
+ /*
+ * assign arg after request_irq call, so it will be
+ * cleaned up
+ */
+ me->arg = arg;
+
+ if (!zalloc_cpumask_var(
+ &dd->msix_entries[i].mask,
+ GFP_KERNEL))
+ goto bail;
+ if (handler == sdma_interrupt) {
+ dd_dev_info(dd, "sdma engine %d cpu %d\n",
+ sde->this_idx, sdma_cpu);
+ cpumask_set_cpu(sdma_cpu, dd->msix_entries[i].mask);
+ sdma_cpu = cpumask_next(sdma_cpu, def);
+ if (sdma_cpu >= nr_cpu_ids)
+ sdma_cpu = cpumask_first(def);
+ } else if (handler == receive_context_interrupt) {
+ dd_dev_info(dd, "rcv ctxt %d cpu %d\n",
+ rcd->ctxt, rcv_cpu);
+ cpumask_set_cpu(rcv_cpu, dd->msix_entries[i].mask);
+ rcv_cpu = cpumask_next(rcv_cpu, rcv);
+ if (rcv_cpu >= nr_cpu_ids)
+ rcv_cpu = cpumask_first(rcv);
+ } else {
+ /* otherwise first def */
+ dd_dev_info(dd, "%s cpu %d\n",
+ err_info, cpumask_first(def));
+ cpumask_set_cpu(
+ cpumask_first(def), dd->msix_entries[i].mask);
+ }
+ irq_set_affinity_hint(
+ dd->msix_entries[i].msix.vector,
+ dd->msix_entries[i].mask);
+ }
+
+out:
+ free_cpumask_var(def);
+ free_cpumask_var(rcv);
+ return ret;
+bail:
+ ret = -ENOMEM;
+ goto out;
+}
+
+/*
+ * Set the general handler to accept all interrupts, remap all
+ * chip interrupts back to MSI-X 0.
+ */
+static void reset_interrupts(struct hfi1_devdata *dd)
+{
+ int i;
+
+ /* all interrupts handled by the general handler */
+ for (i = 0; i < CCE_NUM_INT_CSRS; i++)
+ dd->gi_mask[i] = ~(u64)0;
+
+ /* all chip interrupts map to MSI-X 0 */
+ for (i = 0; i < CCE_NUM_INT_MAP_CSRS; i++)
+ write_csr(dd, CCE_INT_MAP + (8*i), 0);
+}
+
+static int set_up_interrupts(struct hfi1_devdata *dd)
+{
+ struct hfi1_msix_entry *entries;
+ u32 total, request;
+ int i, ret;
+ int single_interrupt = 0; /* we expect to have all the interrupts */
+
+ /*
+ * Interrupt count:
+ * 1 general, "slow path" interrupt (includes the SDMA engines
+ * slow source, SDMACleanupDone)
+ * N interrupts - one per used SDMA engine
+ * M interrupt - one per kernel receive context
+ */
+ total = 1 + dd->num_sdma + dd->n_krcv_queues;
+
+ entries = kcalloc(total, sizeof(*entries), GFP_KERNEL);
+ if (!entries) {
+ dd_dev_err(dd, "cannot allocate msix table\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+ /* 1-1 MSI-X entry assignment */
+ for (i = 0; i < total; i++)
+ entries[i].msix.entry = i;
+
+ /* ask for MSI-X interrupts */
+ request = total;
+ request_msix(dd, &request, entries);
+
+ if (request == 0) {
+ /* using INTx */
+ /* dd->num_msix_entries already zero */
+ kfree(entries);
+ single_interrupt = 1;
+ dd_dev_err(dd, "MSI-X failed, using INTx interrupts\n");
+ } else {
+ /* using MSI-X */
+ dd->num_msix_entries = request;
+ dd->msix_entries = entries;
+
+ if (request != total) {
+ /* using MSI-X, with reduced interrupts */
+ dd_dev_err(
+ dd,
+ "cannot handle reduced interrupt case, want %u, got %u\n",
+ total, request);
+ ret = -EINVAL;
+ goto fail;
+ }
+ dd_dev_info(dd, "%u MSI-X interrupts allocated\n", total);
+ }
+
+ /* mask all interrupts */
+ set_intr_state(dd, 0);
+ /* clear all pending interrupts */
+ clear_all_interrupts(dd);
+
+ /* reset general handler mask, chip MSI-X mappings */
+ reset_interrupts(dd);
+
+ if (single_interrupt)
+ ret = request_intx_irq(dd);
+ else
+ ret = request_msix_irqs(dd);
+ if (ret)
+ goto fail;
+
+ return 0;
+
+fail:
+ clean_up_interrupts(dd);
+ return ret;
+}
+
+/*
+ * Set up context values in dd. Sets:
+ *
+ * num_rcv_contexts - number of contexts being used
+ * n_krcv_queues - number of kernel contexts
+ * first_user_ctxt - first non-kernel context in array of contexts
+ * freectxts - number of free user contexts
+ * num_send_contexts - number of PIO send contexts being used
+ */
+static int set_up_context_variables(struct hfi1_devdata *dd)
+{
+ int num_kernel_contexts;
+ int num_user_contexts;
+ int total_contexts;
+ int ret;
+ unsigned ngroups;
+
+ /*
+ * Kernel contexts: (to be fixed later):
+ * - min or 2 or 1 context/numa
+ * - Context 0 - default/errors
+ * - Context 1 - VL15
+ */
+ if (n_krcvqs)
+ num_kernel_contexts = n_krcvqs + MIN_KERNEL_KCTXTS;
+ else
+ num_kernel_contexts = num_online_nodes();
+ num_kernel_contexts =
+ max_t(int, MIN_KERNEL_KCTXTS, num_kernel_contexts);
+
+ /*
+ * User contexts: (to be fixed later)
+ * - default to 1 user context per CPU
+ */
+ num_user_contexts = num_online_cpus();
+
+ total_contexts = num_kernel_contexts + num_user_contexts;
+
+ /*
+ * Adjust the counts given a global max.
+ * - always cut out user contexts before kernel contexts
+ * - only extend user contexts
+ */
+ if (num_rcv_contexts) {
+ if (num_rcv_contexts < total_contexts) {
+ /* cut back, user first */
+ if (num_rcv_contexts < num_kernel_contexts) {
+ num_kernel_contexts = num_rcv_contexts;
+ num_user_contexts = 0;
+ } else {
+ num_user_contexts = num_rcv_contexts
+ - num_kernel_contexts;
+ }
+ } else {
+ /* extend the user context count */
+ num_user_contexts = num_rcv_contexts
+ - num_kernel_contexts;
+ }
+ /* recalculate */
+ total_contexts = num_kernel_contexts + num_user_contexts;
+ }
+
+ if (total_contexts > dd->chip_rcv_contexts) {
+ /* don't silently adjust, complain and fail */
+ dd_dev_err(dd,
+ "not enough physical contexts: want %d, have %d\n",
+ (int)total_contexts, (int)dd->chip_rcv_contexts);
+ return -ENOSPC;
+ }
+
+ /* the first N are kernel contexts, the rest are user contexts */
+ dd->num_rcv_contexts = total_contexts;
+ dd->n_krcv_queues = num_kernel_contexts;
+ dd->first_user_ctxt = num_kernel_contexts;
+ dd->freectxts = num_user_contexts;
+ dd_dev_info(dd,
+ "rcv contexts: chip %d, used %d (kernel %d, user %d)\n",
+ (int)dd->chip_rcv_contexts,
+ (int)dd->num_rcv_contexts,
+ (int)dd->n_krcv_queues,
+ (int)dd->num_rcv_contexts - dd->n_krcv_queues);
+
+ /*
+ * Receive array allocation:
+ * All RcvArray entries are divided into groups of 8. This
+ * is required by the hardware and will speed up writes to
+ * consecutive entries by using write-combining of the entire
+ * cacheline.
+ *
+ * The number of groups are evenly divided among all contexts.
+ * any left over groups will be given to the first N user
+ * contexts.
+ */
+ dd->rcv_entries.group_size = RCV_INCREMENT;
+ ngroups = dd->chip_rcv_array_count / dd->rcv_entries.group_size;
+ dd->rcv_entries.ngroups = ngroups / dd->num_rcv_contexts;
+ dd->rcv_entries.nctxt_extra = ngroups -
+ (dd->num_rcv_contexts * dd->rcv_entries.ngroups);
+ dd_dev_info(dd, "RcvArray groups %u, ctxts extra %u\n",
+ dd->rcv_entries.ngroups,
+ dd->rcv_entries.nctxt_extra);
+ if (dd->rcv_entries.ngroups * dd->rcv_entries.group_size >
+ MAX_EAGER_ENTRIES * 2) {
+ dd->rcv_entries.ngroups = (MAX_EAGER_ENTRIES * 2) /
+ dd->rcv_entries.group_size;
+ dd_dev_info(dd,
+ "RcvArray group count too high, change to %u\n",
+ dd->rcv_entries.ngroups);
+ dd->rcv_entries.nctxt_extra = 0;
+ }
+ /*
+ * PIO send contexts
+ */
+ ret = init_sc_pools_and_sizes(dd);
+ if (ret >= 0) { /* success */
+ dd->num_send_contexts = ret;
+ dd_dev_info(
+ dd,
+ "send contexts: chip %d, used %d (kernel %d, ack %d, user %d)\n",
+ dd->chip_send_contexts,
+ dd->num_send_contexts,
+ dd->sc_sizes[SC_KERNEL].count,
+ dd->sc_sizes[SC_ACK].count,
+ dd->sc_sizes[SC_USER].count);
+ ret = 0; /* success */
+ }
+
+ return ret;
+}
+
+/*
+ * Set the device/port partition key table. The MAD code
+ * will ensure that, at least, the partial management
+ * partition key is present in the table.
+ */
+static void set_partition_keys(struct hfi1_pportdata *ppd)
+{
+ struct hfi1_devdata *dd = ppd->dd;
+ u64 reg = 0;
+ int i;
+
+ dd_dev_info(dd, "Setting partition keys\n");
+ for (i = 0; i < hfi1_get_npkeys(dd); i++) {
+ reg |= (ppd->pkeys[i] &
+ RCV_PARTITION_KEY_PARTITION_KEY_A_MASK) <<
+ ((i % 4) *
+ RCV_PARTITION_KEY_PARTITION_KEY_B_SHIFT);
+ /* Each register holds 4 PKey values. */
+ if ((i % 4) == 3) {
+ write_csr(dd, RCV_PARTITION_KEY +
+ ((i - 3) * 2), reg);
+ reg = 0;
+ }
+ }
+
+ add_rcvctrl(dd, RCV_CTRL_RCV_PARTITION_KEY_ENABLE_SMASK);
+}
+
+/*
+ * These CSRs and memories are uninitialized on reset and must be
+ * written before reading to set the ECC/parity bits.
+ *
+ * NOTE: All user context CSRs that are not mmaped write-only
+ * (e.g. the TID flows) must be initialized even if the driver never
+ * reads them.
+ */
+static void write_uninitialized_csrs_and_memories(struct hfi1_devdata *dd)
+{
+ int i, j;
+
+ /* CceIntMap */
+ for (i = 0; i < CCE_NUM_INT_MAP_CSRS; i++)
+ write_csr(dd, CCE_INT_MAP+(8*i), 0);
+
+ /* SendCtxtCreditReturnAddr */
+ for (i = 0; i < dd->chip_send_contexts; i++)
+ write_kctxt_csr(dd, i, SEND_CTXT_CREDIT_RETURN_ADDR, 0);
+
+ /* PIO Send buffers */
+ /* SDMA Send buffers */
+ /* These are not normally read, and (presently) have no method
+ to be read, so are not pre-initialized */
+
+ /* RcvHdrAddr */
+ /* RcvHdrTailAddr */
+ /* RcvTidFlowTable */
+ for (i = 0; i < dd->chip_rcv_contexts; i++) {
+ write_kctxt_csr(dd, i, RCV_HDR_ADDR, 0);
+ write_kctxt_csr(dd, i, RCV_HDR_TAIL_ADDR, 0);
+ for (j = 0; j < RXE_NUM_TID_FLOWS; j++)
+ write_uctxt_csr(dd, i, RCV_TID_FLOW_TABLE+(8*j), 0);
+ }
+
+ /* RcvArray */
+ for (i = 0; i < dd->chip_rcv_array_count; i++)
+ write_csr(dd, RCV_ARRAY + (8*i),
+ RCV_ARRAY_RT_WRITE_ENABLE_SMASK);
+
+ /* RcvQPMapTable */
+ for (i = 0; i < 32; i++)
+ write_csr(dd, RCV_QP_MAP_TABLE + (8 * i), 0);
+}
+
+/*
+ * Use the ctrl_bits in CceCtrl to clear the status_bits in CceStatus.
+ */
+static void clear_cce_status(struct hfi1_devdata *dd, u64 status_bits,
+ u64 ctrl_bits)
+{
+ unsigned long timeout;
+ u64 reg;
+
+ /* is the condition present? */
+ reg = read_csr(dd, CCE_STATUS);
+ if ((reg & status_bits) == 0)
+ return;
+
+ /* clear the condition */
+ write_csr(dd, CCE_CTRL, ctrl_bits);
+
+ /* wait for the condition to clear */
+ timeout = jiffies + msecs_to_jiffies(CCE_STATUS_TIMEOUT);
+ while (1) {
+ reg = read_csr(dd, CCE_STATUS);
+ if ((reg & status_bits) == 0)
+ return;
+ if (time_after(jiffies, timeout)) {
+ dd_dev_err(dd,
+ "Timeout waiting for CceStatus to clear bits 0x%llx, remaining 0x%llx\n",
+ status_bits, reg & status_bits);
+ return;
+ }
+ udelay(1);
+ }
+}
+
+/* set CCE CSRs to chip reset defaults */
+static void reset_cce_csrs(struct hfi1_devdata *dd)
+{
+ int i;
+
+ /* CCE_REVISION read-only */
+ /* CCE_REVISION2 read-only */
+ /* CCE_CTRL - bits clear automatically */
+ /* CCE_STATUS read-only, use CceCtrl to clear */
+ clear_cce_status(dd, ALL_FROZE, CCE_CTRL_SPC_UNFREEZE_SMASK);
+ clear_cce_status(dd, ALL_TXE_PAUSE, CCE_CTRL_TXE_RESUME_SMASK);
+ clear_cce_status(dd, ALL_RXE_PAUSE, CCE_CTRL_RXE_RESUME_SMASK);
+ for (i = 0; i < CCE_NUM_SCRATCH; i++)
+ write_csr(dd, CCE_SCRATCH + (8 * i), 0);
+ /* CCE_ERR_STATUS read-only */
+ write_csr(dd, CCE_ERR_MASK, 0);
+ write_csr(dd, CCE_ERR_CLEAR, ~0ull);
+ /* CCE_ERR_FORCE leave alone */
+ for (i = 0; i < CCE_NUM_32_BIT_COUNTERS; i++)
+ write_csr(dd, CCE_COUNTER_ARRAY32 + (8 * i), 0);
+ write_csr(dd, CCE_DC_CTRL, CCE_DC_CTRL_RESETCSR);
+ /* CCE_PCIE_CTRL leave alone */
+ for (i = 0; i < CCE_NUM_MSIX_VECTORS; i++) {
+ write_csr(dd, CCE_MSIX_TABLE_LOWER + (8 * i), 0);
+ write_csr(dd, CCE_MSIX_TABLE_UPPER + (8 * i),
+ CCE_MSIX_TABLE_UPPER_RESETCSR);
+ }
+ for (i = 0; i < CCE_NUM_MSIX_PBAS; i++) {
+ /* CCE_MSIX_PBA read-only */
+ write_csr(dd, CCE_MSIX_INT_GRANTED, ~0ull);
+ write_csr(dd, CCE_MSIX_VEC_CLR_WITHOUT_INT, ~0ull);
+ }
+ for (i = 0; i < CCE_NUM_INT_MAP_CSRS; i++)
+ write_csr(dd, CCE_INT_MAP, 0);
+ for (i = 0; i < CCE_NUM_INT_CSRS; i++) {
+ /* CCE_INT_STATUS read-only */
+ write_csr(dd, CCE_INT_MASK + (8 * i), 0);
+ write_csr(dd, CCE_INT_CLEAR + (8 * i), ~0ull);
+ /* CCE_INT_FORCE leave alone */
+ /* CCE_INT_BLOCKED read-only */
+ }
+ for (i = 0; i < CCE_NUM_32_BIT_INT_COUNTERS; i++)
+ write_csr(dd, CCE_INT_COUNTER_ARRAY32 + (8 * i), 0);
+}
+
+/* set ASIC CSRs to chip reset defaults */
+static void reset_asic_csrs(struct hfi1_devdata *dd)
+{
+ static DEFINE_MUTEX(asic_mutex);
+ static int called;
+ int i;
+
+ /*
+ * If the HFIs are shared between separate nodes or VMs,
+ * then more will need to be done here. One idea is a module
+ * parameter that returns early, letting the first power-on or
+ * a known first load do the reset and blocking all others.
+ */
+
+ /*
+ * These CSRs should only be reset once - the first one here will
+ * do the work. Use a mutex so that a non-first caller waits until
+ * the first is finished before it can proceed.
+ */
+ mutex_lock(&asic_mutex);
+ if (called)
+ goto done;
+ called = 1;
+
+ if (dd->icode != ICODE_FPGA_EMULATION) {
+ /* emulation does not have an SBus - leave these alone */
+ /*
+ * All writes to ASIC_CFG_SBUS_REQUEST do something.
+ * Notes:
+ * o The reset is not zero if aimed at the core. See the
+ * SBus documentation for details.
+ * o If the SBus firmware has been updated (e.g. by the BIOS),
+ * will the reset revert that?
+ */
+ /* ASIC_CFG_SBUS_REQUEST leave alone */
+ write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0);
+ }
+ /* ASIC_SBUS_RESULT read-only */
+ write_csr(dd, ASIC_STS_SBUS_COUNTERS, 0);
+ for (i = 0; i < ASIC_NUM_SCRATCH; i++)
+ write_csr(dd, ASIC_CFG_SCRATCH + (8 * i), 0);
+ write_csr(dd, ASIC_CFG_MUTEX, 0); /* this will clear it */
+ write_csr(dd, ASIC_CFG_DRV_STR, 0);
+ write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0);
+ /* ASIC_STS_THERM read-only */
+ /* ASIC_CFG_RESET leave alone */
+
+ write_csr(dd, ASIC_PCIE_SD_HOST_CMD, 0);
+ /* ASIC_PCIE_SD_HOST_STATUS read-only */
+ write_csr(dd, ASIC_PCIE_SD_INTRPT_DATA_CODE, 0);
+ write_csr(dd, ASIC_PCIE_SD_INTRPT_ENABLE, 0);
+ /* ASIC_PCIE_SD_INTRPT_PROGRESS read-only */
+ write_csr(dd, ASIC_PCIE_SD_INTRPT_STATUS, ~0ull); /* clear */
+ /* ASIC_HFI0_PCIE_SD_INTRPT_RSPD_DATA read-only */
+ /* ASIC_HFI1_PCIE_SD_INTRPT_RSPD_DATA read-only */
+ for (i = 0; i < 16; i++)
+ write_csr(dd, ASIC_PCIE_SD_INTRPT_LIST + (8 * i), 0);
+
+ /* ASIC_GPIO_IN read-only */
+ write_csr(dd, ASIC_GPIO_OE, 0);
+ write_csr(dd, ASIC_GPIO_INVERT, 0);
+ write_csr(dd, ASIC_GPIO_OUT, 0);
+ write_csr(dd, ASIC_GPIO_MASK, 0);
+ /* ASIC_GPIO_STATUS read-only */
+ write_csr(dd, ASIC_GPIO_CLEAR, ~0ull);
+ /* ASIC_GPIO_FORCE leave alone */
+
+ /* ASIC_QSFP1_IN read-only */
+ write_csr(dd, ASIC_QSFP1_OE, 0);
+ write_csr(dd, ASIC_QSFP1_INVERT, 0);
+ write_csr(dd, ASIC_QSFP1_OUT, 0);
+ write_csr(dd, ASIC_QSFP1_MASK, 0);
+ /* ASIC_QSFP1_STATUS read-only */
+ write_csr(dd, ASIC_QSFP1_CLEAR, ~0ull);
+ /* ASIC_QSFP1_FORCE leave alone */
+
+ /* ASIC_QSFP2_IN read-only */
+ write_csr(dd, ASIC_QSFP2_OE, 0);
+ write_csr(dd, ASIC_QSFP2_INVERT, 0);
+ write_csr(dd, ASIC_QSFP2_OUT, 0);
+ write_csr(dd, ASIC_QSFP2_MASK, 0);
+ /* ASIC_QSFP2_STATUS read-only */
+ write_csr(dd, ASIC_QSFP2_CLEAR, ~0ull);
+ /* ASIC_QSFP2_FORCE leave alone */
+
+ write_csr(dd, ASIC_EEP_CTL_STAT, ASIC_EEP_CTL_STAT_RESETCSR);
+ /* this also writes a NOP command, clearing paging mode */
+ write_csr(dd, ASIC_EEP_ADDR_CMD, 0);
+ write_csr(dd, ASIC_EEP_DATA, 0);
+
+done:
+ mutex_unlock(&asic_mutex);
+}
+
+/* set MISC CSRs to chip reset defaults */
+static void reset_misc_csrs(struct hfi1_devdata *dd)
+{
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ write_csr(dd, MISC_CFG_RSA_R2 + (8 * i), 0);
+ write_csr(dd, MISC_CFG_RSA_SIGNATURE + (8 * i), 0);
+ write_csr(dd, MISC_CFG_RSA_MODULUS + (8 * i), 0);
+ }
+ /* MISC_CFG_SHA_PRELOAD leave alone - always reads 0 and can
+ only be written 128-byte chunks */
+ /* init RSA engine to clear lingering errors */
+ write_csr(dd, MISC_CFG_RSA_CMD, 1);
+ write_csr(dd, MISC_CFG_RSA_MU, 0);
+ write_csr(dd, MISC_CFG_FW_CTRL, 0);
+ /* MISC_STS_8051_DIGEST read-only */
+ /* MISC_STS_SBM_DIGEST read-only */
+ /* MISC_STS_PCIE_DIGEST read-only */
+ /* MISC_STS_FAB_DIGEST read-only */
+ /* MISC_ERR_STATUS read-only */
+ write_csr(dd, MISC_ERR_MASK, 0);
+ write_csr(dd, MISC_ERR_CLEAR, ~0ull);
+ /* MISC_ERR_FORCE leave alone */
+}
+
+/* set TXE CSRs to chip reset defaults */
+static void reset_txe_csrs(struct hfi1_devdata *dd)
+{
+ int i;
+
+ /*
+ * TXE Kernel CSRs
+ */
+ write_csr(dd, SEND_CTRL, 0);
+ __cm_reset(dd, 0); /* reset CM internal state */
+ /* SEND_CONTEXTS read-only */
+ /* SEND_DMA_ENGINES read-only */
+ /* SEND_PIO_MEM_SIZE read-only */
+ /* SEND_DMA_MEM_SIZE read-only */
+ write_csr(dd, SEND_HIGH_PRIORITY_LIMIT, 0);
+ pio_reset_all(dd); /* SEND_PIO_INIT_CTXT */
+ /* SEND_PIO_ERR_STATUS read-only */
+ write_csr(dd, SEND_PIO_ERR_MASK, 0);
+ write_csr(dd, SEND_PIO_ERR_CLEAR, ~0ull);
+ /* SEND_PIO_ERR_FORCE leave alone */
+ /* SEND_DMA_ERR_STATUS read-only */
+ write_csr(dd, SEND_DMA_ERR_MASK, 0);
+ write_csr(dd, SEND_DMA_ERR_CLEAR, ~0ull);
+ /* SEND_DMA_ERR_FORCE leave alone */
+ /* SEND_EGRESS_ERR_STATUS read-only */
+ write_csr(dd, SEND_EGRESS_ERR_MASK, 0);
+ write_csr(dd, SEND_EGRESS_ERR_CLEAR, ~0ull);
+ /* SEND_EGRESS_ERR_FORCE leave alone */
+ write_csr(dd, SEND_BTH_QP, 0);
+ write_csr(dd, SEND_STATIC_RATE_CONTROL, 0);
+ write_csr(dd, SEND_SC2VLT0, 0);
+ write_csr(dd, SEND_SC2VLT1, 0);
+ write_csr(dd, SEND_SC2VLT2, 0);
+ write_csr(dd, SEND_SC2VLT3, 0);
+ write_csr(dd, SEND_LEN_CHECK0, 0);
+ write_csr(dd, SEND_LEN_CHECK1, 0);
+ /* SEND_ERR_STATUS read-only */
+ write_csr(dd, SEND_ERR_MASK, 0);
+ write_csr(dd, SEND_ERR_CLEAR, ~0ull);
+ /* SEND_ERR_FORCE read-only */
+ for (i = 0; i < VL_ARB_LOW_PRIO_TABLE_SIZE; i++)
+ write_csr(dd, SEND_LOW_PRIORITY_LIST + (8*i), 0);
+ for (i = 0; i < VL_ARB_HIGH_PRIO_TABLE_SIZE; i++)
+ write_csr(dd, SEND_HIGH_PRIORITY_LIST + (8*i), 0);
+ for (i = 0; i < dd->chip_send_contexts/NUM_CONTEXTS_PER_SET; i++)
+ write_csr(dd, SEND_CONTEXT_SET_CTRL + (8*i), 0);
+ for (i = 0; i < TXE_NUM_32_BIT_COUNTER; i++)
+ write_csr(dd, SEND_COUNTER_ARRAY32 + (8*i), 0);
+ for (i = 0; i < TXE_NUM_64_BIT_COUNTER; i++)
+ write_csr(dd, SEND_COUNTER_ARRAY64 + (8*i), 0);
+ write_csr(dd, SEND_CM_CTRL, SEND_CM_CTRL_RESETCSR);
+ write_csr(dd, SEND_CM_GLOBAL_CREDIT,
+ SEND_CM_GLOBAL_CREDIT_RESETCSR);
+ /* SEND_CM_CREDIT_USED_STATUS read-only */
+ write_csr(dd, SEND_CM_TIMER_CTRL, 0);
+ write_csr(dd, SEND_CM_LOCAL_AU_TABLE0_TO3, 0);
+ write_csr(dd, SEND_CM_LOCAL_AU_TABLE4_TO7, 0);
+ write_csr(dd, SEND_CM_REMOTE_AU_TABLE0_TO3, 0);
+ write_csr(dd, SEND_CM_REMOTE_AU_TABLE4_TO7, 0);
+ for (i = 0; i < TXE_NUM_DATA_VL; i++)
+ write_csr(dd, SEND_CM_CREDIT_VL + (8*i), 0);
+ write_csr(dd, SEND_CM_CREDIT_VL15, 0);
+ /* SEND_CM_CREDIT_USED_VL read-only */
+ /* SEND_CM_CREDIT_USED_VL15 read-only */
+ /* SEND_EGRESS_CTXT_STATUS read-only */
+ /* SEND_EGRESS_SEND_DMA_STATUS read-only */
+ write_csr(dd, SEND_EGRESS_ERR_INFO, ~0ull);
+ /* SEND_EGRESS_ERR_INFO read-only */
+ /* SEND_EGRESS_ERR_SOURCE read-only */
+
+ /*
+ * TXE Per-Context CSRs
+ */
+ for (i = 0; i < dd->chip_send_contexts; i++) {
+ write_kctxt_csr(dd, i, SEND_CTXT_CTRL, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_CREDIT_CTRL, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_CREDIT_RETURN_ADDR, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_CREDIT_FORCE, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_ERR_MASK, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_ERR_CLEAR, ~0ull);
+ write_kctxt_csr(dd, i, SEND_CTXT_CHECK_ENABLE, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_CHECK_VL, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_CHECK_JOB_KEY, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_CHECK_PARTITION_KEY, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_CHECK_SLID, 0);
+ write_kctxt_csr(dd, i, SEND_CTXT_CHECK_OPCODE, 0);
+ }
+
+ /*
+ * TXE Per-SDMA CSRs
+ */
+ for (i = 0; i < dd->chip_sdma_engines; i++) {
+ write_kctxt_csr(dd, i, SEND_DMA_CTRL, 0);
+ /* SEND_DMA_STATUS read-only */
+ write_kctxt_csr(dd, i, SEND_DMA_BASE_ADDR, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_LEN_GEN, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_TAIL, 0);
+ /* SEND_DMA_HEAD read-only */
+ write_kctxt_csr(dd, i, SEND_DMA_HEAD_ADDR, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_PRIORITY_THLD, 0);
+ /* SEND_DMA_IDLE_CNT read-only */
+ write_kctxt_csr(dd, i, SEND_DMA_RELOAD_CNT, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_DESC_CNT, 0);
+ /* SEND_DMA_DESC_FETCHED_CNT read-only */
+ /* SEND_DMA_ENG_ERR_STATUS read-only */
+ write_kctxt_csr(dd, i, SEND_DMA_ENG_ERR_MASK, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_ENG_ERR_CLEAR, ~0ull);
+ /* SEND_DMA_ENG_ERR_FORCE leave alone */
+ write_kctxt_csr(dd, i, SEND_DMA_CHECK_ENABLE, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_CHECK_VL, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_CHECK_JOB_KEY, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_CHECK_PARTITION_KEY, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_CHECK_SLID, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_CHECK_OPCODE, 0);
+ write_kctxt_csr(dd, i, SEND_DMA_MEMORY, 0);
+ }
+}
+
+/*
+ * Expect on entry:
+ * o Packet ingress is disabled, i.e. RcvCtrl.RcvPortEnable == 0
+ */
+static void init_rbufs(struct hfi1_devdata *dd)
+{
+ u64 reg;
+ int count;
+
+ /*
+ * Wait for DMA to stop: RxRbufPktPending and RxPktInProgress are
+ * clear.
+ */
+ count = 0;
+ while (1) {
+ reg = read_csr(dd, RCV_STATUS);
+ if ((reg & (RCV_STATUS_RX_RBUF_PKT_PENDING_SMASK
+ | RCV_STATUS_RX_PKT_IN_PROGRESS_SMASK)) == 0)
+ break;
+ /*
+ * Give up after 1ms - maximum wait time.
+ *
+ * RBuf size is 148KiB. Slowest possible is PCIe Gen1 x1 at
+ * 250MB/s bandwidth. Lower rate to 66% for overhead to get:
+ * 148 KB / (66% * 250MB/s) = 920us
+ */
+ if (count++ > 500) {
+ dd_dev_err(dd,
+ "%s: in-progress DMA not clearing: RcvStatus 0x%llx, continuing\n",
+ __func__, reg);
+ break;
+ }
+ udelay(2); /* do not busy-wait the CSR */
+ }
+
+ /* start the init - expect RcvCtrl to be 0 */
+ write_csr(dd, RCV_CTRL, RCV_CTRL_RX_RBUF_INIT_SMASK);
+
+ /*
+ * Read to force the write of Rcvtrl.RxRbufInit. There is a brief
+ * period after the write before RcvStatus.RxRbufInitDone is valid.
+ * The delay in the first run through the loop below is sufficient and
+ * required before the first read of RcvStatus.RxRbufInintDone.
+ */
+ read_csr(dd, RCV_CTRL);
+
+ /* wait for the init to finish */
+ count = 0;
+ while (1) {
+ /* delay is required first time through - see above */
+ udelay(2); /* do not busy-wait the CSR */
+ reg = read_csr(dd, RCV_STATUS);
+ if (reg & (RCV_STATUS_RX_RBUF_INIT_DONE_SMASK))
+ break;
+
+ /* give up after 100us - slowest possible at 33MHz is 73us */
+ if (count++ > 50) {
+ dd_dev_err(dd,
+ "%s: RcvStatus.RxRbufInit not set, continuing\n",
+ __func__);
+ break;
+ }
+ }
+}
+
+/* set RXE CSRs to chip reset defaults */
+static void reset_rxe_csrs(struct hfi1_devdata *dd)
+{
+ int i, j;
+
+ /*
+ * RXE Kernel CSRs
+ */
+ write_csr(dd, RCV_CTRL, 0);
+ init_rbufs(dd);
+ /* RCV_STATUS read-only */
+ /* RCV_CONTEXTS read-only */
+ /* RCV_ARRAY_CNT read-only */
+ /* RCV_BUF_SIZE read-only */
+ write_csr(dd, RCV_BTH_QP, 0);
+ write_csr(dd, RCV_MULTICAST, 0);
+ write_csr(dd, RCV_BYPASS, 0);
+ write_csr(dd, RCV_VL15, 0);
+ /* this is a clear-down */
+ write_csr(dd, RCV_ERR_INFO,
+ RCV_ERR_INFO_RCV_EXCESS_BUFFER_OVERRUN_SMASK);
+ /* RCV_ERR_STATUS read-only */
+ write_csr(dd, RCV_ERR_MASK, 0);
+ write_csr(dd, RCV_ERR_CLEAR, ~0ull);
+ /* RCV_ERR_FORCE leave alone */
+ for (i = 0; i < 32; i++)
+ write_csr(dd, RCV_QP_MAP_TABLE + (8 * i), 0);
+ for (i = 0; i < 4; i++)
+ write_csr(dd, RCV_PARTITION_KEY + (8 * i), 0);
+ for (i = 0; i < RXE_NUM_32_BIT_COUNTERS; i++)
+ write_csr(dd, RCV_COUNTER_ARRAY32 + (8 * i), 0);
+ for (i = 0; i < RXE_NUM_64_BIT_COUNTERS; i++)
+ write_csr(dd, RCV_COUNTER_ARRAY64 + (8 * i), 0);
+ for (i = 0; i < RXE_NUM_RSM_INSTANCES; i++) {
+ write_csr(dd, RCV_RSM_CFG + (8 * i), 0);
+ write_csr(dd, RCV_RSM_SELECT + (8 * i), 0);
+ write_csr(dd, RCV_RSM_MATCH + (8 * i), 0);
+ }
+ for (i = 0; i < 32; i++)
+ write_csr(dd, RCV_RSM_MAP_TABLE + (8 * i), 0);
+
+ /*
+ * RXE Kernel and User Per-Context CSRs
+ */
+ for (i = 0; i < dd->chip_rcv_contexts; i++) {
+ /* kernel */
+ write_kctxt_csr(dd, i, RCV_CTXT_CTRL, 0);
+ /* RCV_CTXT_STATUS read-only */
+ write_kctxt_csr(dd, i, RCV_EGR_CTRL, 0);
+ write_kctxt_csr(dd, i, RCV_TID_CTRL, 0);
+ write_kctxt_csr(dd, i, RCV_KEY_CTRL, 0);
+ write_kctxt_csr(dd, i, RCV_HDR_ADDR, 0);
+ write_kctxt_csr(dd, i, RCV_HDR_CNT, 0);
+ write_kctxt_csr(dd, i, RCV_HDR_ENT_SIZE, 0);
+ write_kctxt_csr(dd, i, RCV_HDR_SIZE, 0);
+ write_kctxt_csr(dd, i, RCV_HDR_TAIL_ADDR, 0);
+ write_kctxt_csr(dd, i, RCV_AVAIL_TIME_OUT, 0);
+ write_kctxt_csr(dd, i, RCV_HDR_OVFL_CNT, 0);
+
+ /* user */
+ /* RCV_HDR_TAIL read-only */
+ write_uctxt_csr(dd, i, RCV_HDR_HEAD, 0);
+ /* RCV_EGR_INDEX_TAIL read-only */
+ write_uctxt_csr(dd, i, RCV_EGR_INDEX_HEAD, 0);
+ /* RCV_EGR_OFFSET_TAIL read-only */
+ for (j = 0; j < RXE_NUM_TID_FLOWS; j++) {
+ write_uctxt_csr(dd, i, RCV_TID_FLOW_TABLE + (8 * j),
+ 0);
+ }
+ }
+}
+
+/*
+ * Set sc2vl tables.
+ *
+ * They power on to zeros, so to avoid send context errors
+ * they need to be set:
+ *
+ * SC 0-7 -> VL 0-7 (respectively)
+ * SC 15 -> VL 15
+ * otherwise
+ * -> VL 0
+ */
+static void init_sc2vl_tables(struct hfi1_devdata *dd)
+{
+ int i;
+ /* init per architecture spec, constrained by hardware capability */
+
+ /* HFI maps sent packets */
+ write_csr(dd, SEND_SC2VLT0, SC2VL_VAL(
+ 0,
+ 0, 0, 1, 1,
+ 2, 2, 3, 3,
+ 4, 4, 5, 5,
+ 6, 6, 7, 7));
+ write_csr(dd, SEND_SC2VLT1, SC2VL_VAL(
+ 1,
+ 8, 0, 9, 0,
+ 10, 0, 11, 0,
+ 12, 0, 13, 0,
+ 14, 0, 15, 15));
+ write_csr(dd, SEND_SC2VLT2, SC2VL_VAL(
+ 2,
+ 16, 0, 17, 0,
+ 18, 0, 19, 0,
+ 20, 0, 21, 0,
+ 22, 0, 23, 0));
+ write_csr(dd, SEND_SC2VLT3, SC2VL_VAL(
+ 3,
+ 24, 0, 25, 0,
+ 26, 0, 27, 0,
+ 28, 0, 29, 0,
+ 30, 0, 31, 0));
+
+ /* DC maps received packets */
+ write_csr(dd, DCC_CFG_SC_VL_TABLE_15_0, DC_SC_VL_VAL(
+ 15_0,
+ 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7,
+ 8, 0, 9, 0, 10, 0, 11, 0, 12, 0, 13, 0, 14, 0, 15, 15));
+ write_csr(dd, DCC_CFG_SC_VL_TABLE_31_16, DC_SC_VL_VAL(
+ 31_16,
+ 16, 0, 17, 0, 18, 0, 19, 0, 20, 0, 21, 0, 22, 0, 23, 0,
+ 24, 0, 25, 0, 26, 0, 27, 0, 28, 0, 29, 0, 30, 0, 31, 0));
+
+ /* initialize the cached sc2vl values consistently with h/w */
+ for (i = 0; i < 32; i++) {
+ if (i < 8 || i == 15)
+ *((u8 *)(dd->sc2vl) + i) = (u8)i;
+ else
+ *((u8 *)(dd->sc2vl) + i) = 0;
+ }
+}
+
+/*
+ * Read chip sizes and then reset parts to sane, disabled, values. We cannot
+ * depend on the chip going through a power-on reset - a driver may be loaded
+ * and unloaded many times.
+ *
+ * Do not write any CSR values to the chip in this routine - there may be
+ * a reset following the (possible) FLR in this routine.
+ *
+ */
+static void init_chip(struct hfi1_devdata *dd)
+{
+ int i;
+
+ /*
+ * Put the HFI CSRs in a known state.
+ * Combine this with a DC reset.
+ *
+ * Stop the device from doing anything while we do a
+ * reset. We know there are no other active users of
+ * the device since we are now in charge. Turn off
+ * off all outbound and inbound traffic and make sure
+ * the device does not generate any interrupts.
+ */
+
+ /* disable send contexts and SDMA engines */
+ write_csr(dd, SEND_CTRL, 0);
+ for (i = 0; i < dd->chip_send_contexts; i++)
+ write_kctxt_csr(dd, i, SEND_CTXT_CTRL, 0);
+ for (i = 0; i < dd->chip_sdma_engines; i++)
+ write_kctxt_csr(dd, i, SEND_DMA_CTRL, 0);
+ /* disable port (turn off RXE inbound traffic) and contexts */
+ write_csr(dd, RCV_CTRL, 0);
+ for (i = 0; i < dd->chip_rcv_contexts; i++)
+ write_csr(dd, RCV_CTXT_CTRL, 0);
+ /* mask all interrupt sources */
+ for (i = 0; i < CCE_NUM_INT_CSRS; i++)
+ write_csr(dd, CCE_INT_MASK + (8*i), 0ull);
+
+ /*
+ * DC Reset: do a full DC reset before the register clear.
+ * A recommended length of time to hold is one CSR read,
+ * so reread the CceDcCtrl. Then, hold the DC in reset
+ * across the clear.
+ */
+ write_csr(dd, CCE_DC_CTRL, CCE_DC_CTRL_DC_RESET_SMASK);
+ (void) read_csr(dd, CCE_DC_CTRL);
+
+ if (use_flr) {
+ /*
+ * A FLR will reset the SPC core and part of the PCIe.
+ * The parts that need to be restored have already been
+ * saved.
+ */
+ dd_dev_info(dd, "Resetting CSRs with FLR\n");
+
+ /* do the FLR, the DC reset will remain */
+ hfi1_pcie_flr(dd);
+
+ /* restore command and BARs */
+ restore_pci_variables(dd);
+
+ if (is_a0(dd)) {
+ dd_dev_info(dd, "Resetting CSRs with FLR\n");
+ hfi1_pcie_flr(dd);
+ restore_pci_variables(dd);
+ }
+
+ } else {
+ dd_dev_info(dd, "Resetting CSRs with writes\n");
+ reset_cce_csrs(dd);
+ reset_txe_csrs(dd);
+ reset_rxe_csrs(dd);
+ reset_asic_csrs(dd);
+ reset_misc_csrs(dd);
+ }
+ /* clear the DC reset */
+ write_csr(dd, CCE_DC_CTRL, 0);
+ /* Set the LED off */
+ if (is_a0(dd))
+ setextled(dd, 0);
+ /*
+ * Clear the QSFP reset.
+ * A0 leaves the out lines floating on power on, then on an FLR
+ * enforces a 0 on all out pins. The driver does not touch
+ * ASIC_QSFPn_OUT otherwise. This leaves RESET_N low and
+ * anything plugged constantly in reset, if it pays attention
+ * to RESET_N.
+ * A prime example of this is SiPh. For now, set all pins high.
+ * I2CCLK and I2CDAT will change per direction, and INT_N and
+ * MODPRS_N are input only and their value is ignored.
+ */
+ if (is_a0(dd)) {
+ write_csr(dd, ASIC_QSFP1_OUT, 0x1f);
+ write_csr(dd, ASIC_QSFP2_OUT, 0x1f);
+ }
+}
+
+static void init_early_variables(struct hfi1_devdata *dd)
+{
+ int i;
+
+ /* assign link credit variables */
+ dd->vau = CM_VAU;
+ dd->link_credits = CM_GLOBAL_CREDITS;
+ if (is_a0(dd))
+ dd->link_credits--;
+ dd->vcu = cu_to_vcu(hfi1_cu);
+ /* enough room for 8 MAD packets plus header - 17K */
+ dd->vl15_init = (8 * (2048 + 128)) / vau_to_au(dd->vau);
+ if (dd->vl15_init > dd->link_credits)
+ dd->vl15_init = dd->link_credits;
+
+ write_uninitialized_csrs_and_memories(dd);
+
+ if (HFI1_CAP_IS_KSET(PKEY_CHECK))
+ for (i = 0; i < dd->num_pports; i++) {
+ struct hfi1_pportdata *ppd = &dd->pport[i];
+
+ set_partition_keys(ppd);
+ }
+ init_sc2vl_tables(dd);
+}
+
+static void init_kdeth_qp(struct hfi1_devdata *dd)
+{
+ /* user changed the KDETH_QP */
+ if (kdeth_qp != 0 && kdeth_qp >= 0xff) {
+ /* out of range or illegal value */
+ dd_dev_err(dd, "Invalid KDETH queue pair prefix, ignoring");
+ kdeth_qp = 0;
+ }
+ if (kdeth_qp == 0) /* not set, or failed range check */
+ kdeth_qp = DEFAULT_KDETH_QP;
+
+ write_csr(dd, SEND_BTH_QP,
+ (kdeth_qp & SEND_BTH_QP_KDETH_QP_MASK)
+ << SEND_BTH_QP_KDETH_QP_SHIFT);
+
+ write_csr(dd, RCV_BTH_QP,
+ (kdeth_qp & RCV_BTH_QP_KDETH_QP_MASK)
+ << RCV_BTH_QP_KDETH_QP_SHIFT);
+}
+
+/**
+ * init_qpmap_table
+ * @dd - device data
+ * @first_ctxt - first context
+ * @last_ctxt - first context
+ *
+ * This return sets the qpn mapping table that
+ * is indexed by qpn[8:1].
+ *
+ * The routine will round robin the 256 settings
+ * from first_ctxt to last_ctxt.
+ *
+ * The first/last looks ahead to having specialized
+ * receive contexts for mgmt and bypass. Normal
+ * verbs traffic will assumed to be on a range
+ * of receive contexts.
+ */
+static void init_qpmap_table(struct hfi1_devdata *dd,
+ u32 first_ctxt,
+ u32 last_ctxt)
+{
+ u64 reg = 0;
+ u64 regno = RCV_QP_MAP_TABLE;
+ int i;
+ u64 ctxt = first_ctxt;
+
+ for (i = 0; i < 256;) {
+ if (ctxt == VL15CTXT) {
+ ctxt++;
+ if (ctxt > last_ctxt)
+ ctxt = first_ctxt;
+ continue;
+ }
+ reg |= ctxt << (8 * (i % 8));
+ i++;
+ ctxt++;
+ if (ctxt > last_ctxt)
+ ctxt = first_ctxt;
+ if (i % 8 == 0) {
+ write_csr(dd, regno, reg);
+ reg = 0;
+ regno += 8;
+ }
+ }
+ if (i % 8)
+ write_csr(dd, regno, reg);
+
+ add_rcvctrl(dd, RCV_CTRL_RCV_QP_MAP_ENABLE_SMASK
+ | RCV_CTRL_RCV_BYPASS_ENABLE_SMASK);
+}
+
+/**
+ * init_qos - init RX qos
+ * @dd - device data
+ * @first_context
+ *
+ * This routine initializes Rule 0 and the
+ * RSM map table to implement qos.
+ *
+ * If all of the limit tests succeed,
+ * qos is applied based on the array
+ * interpretation of krcvqs where
+ * entry 0 is VL0.
+ *
+ * The number of vl bits (n) and the number of qpn
+ * bits (m) are computed to feed both the RSM map table
+ * and the single rule.
+ *
+ */
+static void init_qos(struct hfi1_devdata *dd, u32 first_ctxt)
+{
+ u8 max_by_vl = 0;
+ unsigned qpns_per_vl, ctxt, i, qpn, n = 1, m;
+ u64 *rsmmap;
+ u64 reg;
+ u8 rxcontext = is_a0(dd) ? 0 : 0xff; /* 0 is default if a0 ver. */
+
+ /* validate */
+ if (dd->n_krcv_queues <= MIN_KERNEL_KCTXTS ||
+ num_vls == 1 ||
+ krcvqsset <= 1)
+ goto bail;
+ for (i = 0; i < min_t(unsigned, num_vls, krcvqsset); i++)
+ if (krcvqs[i] > max_by_vl)
+ max_by_vl = krcvqs[i];
+ if (max_by_vl > 32)
+ goto bail;
+ qpns_per_vl = __roundup_pow_of_two(max_by_vl);
+ /* determine bits vl */
+ n = ilog2(num_vls);
+ /* determine bits for qpn */
+ m = ilog2(qpns_per_vl);
+ if ((m + n) > 7)
+ goto bail;
+ if (num_vls * qpns_per_vl > dd->chip_rcv_contexts)
+ goto bail;
+ rsmmap = kmalloc_array(NUM_MAP_REGS, sizeof(u64), GFP_KERNEL);
+ memset(rsmmap, rxcontext, NUM_MAP_REGS * sizeof(u64));
+ /* init the local copy of the table */
+ for (i = 0, ctxt = first_ctxt; i < num_vls; i++) {
+ unsigned tctxt;
+
+ for (qpn = 0, tctxt = ctxt;
+ krcvqs[i] && qpn < qpns_per_vl; qpn++) {
+ unsigned idx, regoff, regidx;
+
+ /* generate index <= 128 */
+ idx = (qpn << n) ^ i;
+ regoff = (idx % 8) * 8;
+ regidx = idx / 8;
+ reg = rsmmap[regidx];
+ /* replace 0xff with context number */
+ reg &= ~(RCV_RSM_MAP_TABLE_RCV_CONTEXT_A_MASK
+ << regoff);
+ reg |= (u64)(tctxt++) << regoff;
+ rsmmap[regidx] = reg;
+ if (tctxt == ctxt + krcvqs[i])
+ tctxt = ctxt;
+ }
+ ctxt += krcvqs[i];
+ }
+ /* flush cached copies to chip */
+ for (i = 0; i < NUM_MAP_REGS; i++)
+ write_csr(dd, RCV_RSM_MAP_TABLE + (8 * i), rsmmap[i]);
+ /* add rule0 */
+ write_csr(dd, RCV_RSM_CFG /* + (8 * 0) */,
+ RCV_RSM_CFG_ENABLE_OR_CHAIN_RSM0_MASK
+ << RCV_RSM_CFG_ENABLE_OR_CHAIN_RSM0_SHIFT |
+ 2ull << RCV_RSM_CFG_PACKET_TYPE_SHIFT);
+ write_csr(dd, RCV_RSM_SELECT /* + (8 * 0) */,
+ LRH_BTH_MATCH_OFFSET
+ << RCV_RSM_SELECT_FIELD1_OFFSET_SHIFT |
+ LRH_SC_MATCH_OFFSET << RCV_RSM_SELECT_FIELD2_OFFSET_SHIFT |
+ LRH_SC_SELECT_OFFSET << RCV_RSM_SELECT_INDEX1_OFFSET_SHIFT |
+ ((u64)n) << RCV_RSM_SELECT_INDEX1_WIDTH_SHIFT |
+ QPN_SELECT_OFFSET << RCV_RSM_SELECT_INDEX2_OFFSET_SHIFT |
+ ((u64)m + (u64)n) << RCV_RSM_SELECT_INDEX2_WIDTH_SHIFT);
+ write_csr(dd, RCV_RSM_MATCH /* + (8 * 0) */,
+ LRH_BTH_MASK << RCV_RSM_MATCH_MASK1_SHIFT |
+ LRH_BTH_VALUE << RCV_RSM_MATCH_VALUE1_SHIFT |
+ LRH_SC_MASK << RCV_RSM_MATCH_MASK2_SHIFT |
+ LRH_SC_VALUE << RCV_RSM_MATCH_VALUE2_SHIFT);
+ /* Enable RSM */
+ add_rcvctrl(dd, RCV_CTRL_RCV_RSM_ENABLE_SMASK);
+ kfree(rsmmap);
+ /* map everything else (non-VL15) to context 0 */
+ init_qpmap_table(
+ dd,
+ 0,
+ 0);
+ dd->qos_shift = n + 1;
+ return;
+bail:
+ dd->qos_shift = 1;
+ init_qpmap_table(
+ dd,
+ dd->n_krcv_queues > MIN_KERNEL_KCTXTS ? MIN_KERNEL_KCTXTS : 0,
+ dd->n_krcv_queues - 1);
+}
+
+static void init_rxe(struct hfi1_devdata *dd)
+{
+ /* enable all receive errors */
+ write_csr(dd, RCV_ERR_MASK, ~0ull);
+ /* setup QPN map table - start where VL15 context leaves off */
+ init_qos(
+ dd,
+ dd->n_krcv_queues > MIN_KERNEL_KCTXTS ? MIN_KERNEL_KCTXTS : 0);
+ /*
+ * make sure RcvCtrl.RcvWcb <= PCIe Device Control
+ * Register Max_Payload_Size (PCI_EXP_DEVCTL in Linux PCIe config
+ * space, PciCfgCap2.MaxPayloadSize in HFI). There is only one
+ * invalid configuration: RcvCtrl.RcvWcb set to its max of 256 and
+ * Max_PayLoad_Size set to its minimum of 128.
+ *
+ * Presently, RcvCtrl.RcvWcb is not modified from its default of 0
+ * (64 bytes). Max_Payload_Size is possibly modified upward in
+ * tune_pcie_caps() which is called after this routine.
+ */
+}
+
+static void init_other(struct hfi1_devdata *dd)
+{
+ /* enable all CCE errors */
+ write_csr(dd, CCE_ERR_MASK, ~0ull);
+ /* enable *some* Misc errors */
+ write_csr(dd, MISC_ERR_MASK, DRIVER_MISC_MASK);
+ /* enable all DC errors, except LCB */
+ write_csr(dd, DCC_ERR_FLG_EN, ~0ull);
+ write_csr(dd, DC_DC8051_ERR_EN, ~0ull);
+}
+
+/*
+ * Fill out the given AU table using the given CU. A CU is defined in terms
+ * AUs. The table is a an encoding: given the index, how many AUs does that
+ * represent?
+ *
+ * NOTE: Assumes that the register layout is the same for the
+ * local and remote tables.
+ */
+static void assign_cm_au_table(struct hfi1_devdata *dd, u32 cu,
+ u32 csr0to3, u32 csr4to7)
+{
+ write_csr(dd, csr0to3,
+ 0ull <<
+ SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE0_SHIFT
+ | 1ull <<
+ SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE1_SHIFT
+ | 2ull * cu <<
+ SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE2_SHIFT
+ | 4ull * cu <<
+ SEND_CM_LOCAL_AU_TABLE0_TO3_LOCAL_AU_TABLE3_SHIFT);
+ write_csr(dd, csr4to7,
+ 8ull * cu <<
+ SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE4_SHIFT
+ | 16ull * cu <<
+ SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE5_SHIFT
+ | 32ull * cu <<
+ SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE6_SHIFT
+ | 64ull * cu <<
+ SEND_CM_LOCAL_AU_TABLE4_TO7_LOCAL_AU_TABLE7_SHIFT);
+
+}
+
+static void assign_local_cm_au_table(struct hfi1_devdata *dd, u8 vcu)
+{
+ assign_cm_au_table(dd, vcu_to_cu(vcu), SEND_CM_LOCAL_AU_TABLE0_TO3,
+ SEND_CM_LOCAL_AU_TABLE4_TO7);
+}
+
+void assign_remote_cm_au_table(struct hfi1_devdata *dd, u8 vcu)
+{
+ assign_cm_au_table(dd, vcu_to_cu(vcu), SEND_CM_REMOTE_AU_TABLE0_TO3,
+ SEND_CM_REMOTE_AU_TABLE4_TO7);
+}
+
+static void init_txe(struct hfi1_devdata *dd)
+{
+ int i;
+
+ /* enable all PIO, SDMA, general, and Egress errors */
+ write_csr(dd, SEND_PIO_ERR_MASK, ~0ull);
+ write_csr(dd, SEND_DMA_ERR_MASK, ~0ull);
+ write_csr(dd, SEND_ERR_MASK, ~0ull);
+ write_csr(dd, SEND_EGRESS_ERR_MASK, ~0ull);
+
+ /* enable all per-context and per-SDMA engine errors */
+ for (i = 0; i < dd->chip_send_contexts; i++)
+ write_kctxt_csr(dd, i, SEND_CTXT_ERR_MASK, ~0ull);
+ for (i = 0; i < dd->chip_sdma_engines; i++)
+ write_kctxt_csr(dd, i, SEND_DMA_ENG_ERR_MASK, ~0ull);
+
+ /* set the local CU to AU mapping */
+ assign_local_cm_au_table(dd, dd->vcu);
+}
+
+int hfi1_set_ctxt_jkey(struct hfi1_devdata *dd, unsigned ctxt, u16 jkey)
+{
+ struct hfi1_ctxtdata *rcd = dd->rcd[ctxt];
+ unsigned sctxt;
+ int ret = 0;
+ u64 reg;
+
+ if (!rcd || !rcd->sc) {
+ ret = -EINVAL;
+ goto done;
+ }
+ sctxt = rcd->sc->hw_context;
+ reg = SEND_CTXT_CHECK_JOB_KEY_MASK_SMASK | /* mask is always 1's */
+ ((jkey & SEND_CTXT_CHECK_JOB_KEY_VALUE_MASK) <<
+ SEND_CTXT_CHECK_JOB_KEY_VALUE_SHIFT);
+ /* JOB_KEY_ALLOW_PERMISSIVE is not allowed by default */
+ if (HFI1_CAP_KGET_MASK(rcd->flags, ALLOW_PERM_JKEY))
+ reg |= SEND_CTXT_CHECK_JOB_KEY_ALLOW_PERMISSIVE_SMASK;
+ write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_JOB_KEY, reg);
+ /*
+ * Enable send-side J_KEY integrity check, unless this is A0 h/w
+ * (due to A0 erratum).
+ */
+ if (!is_a0(dd)) {
+ reg = read_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE);
+ reg |= SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK;
+ write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE, reg);
+ }
+
+ /* Enable J_KEY check on receive context. */
+ reg = RCV_KEY_CTRL_JOB_KEY_ENABLE_SMASK |
+ ((jkey & RCV_KEY_CTRL_JOB_KEY_VALUE_MASK) <<
+ RCV_KEY_CTRL_JOB_KEY_VALUE_SHIFT);
+ write_kctxt_csr(dd, ctxt, RCV_KEY_CTRL, reg);
+done:
+ return ret;
+}
+
+int hfi1_clear_ctxt_jkey(struct hfi1_devdata *dd, unsigned ctxt)
+{
+ struct hfi1_ctxtdata *rcd = dd->rcd[ctxt];
+ unsigned sctxt;
+ int ret = 0;
+ u64 reg;
+
+ if (!rcd || !rcd->sc) {
+ ret = -EINVAL;
+ goto done;
+ }
+ sctxt = rcd->sc->hw_context;
+ write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_JOB_KEY, 0);
+ /*
+ * Disable send-side J_KEY integrity check, unless this is A0 h/w.
+ * This check would not have been enabled for A0 h/w, see
+ * set_ctxt_jkey().
+ */
+ if (!is_a0(dd)) {
+ reg = read_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE);
+ reg &= ~SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK;
+ write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE, reg);
+ }
+ /* Turn off the J_KEY on the receive side */
+ write_kctxt_csr(dd, ctxt, RCV_KEY_CTRL, 0);
+done:
+ return ret;
+}
+
+int hfi1_set_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt, u16 pkey)
+{
+ struct hfi1_ctxtdata *rcd;
+ unsigned sctxt;
+ int ret = 0;
+ u64 reg;
+
+ if (ctxt < dd->num_rcv_contexts)
+ rcd = dd->rcd[ctxt];
+ else {
+ ret = -EINVAL;
+ goto done;
+ }
+ if (!rcd || !rcd->sc) {
+ ret = -EINVAL;
+ goto done;
+ }
+ sctxt = rcd->sc->hw_context;
+ reg = ((u64)pkey & SEND_CTXT_CHECK_PARTITION_KEY_VALUE_MASK) <<
+ SEND_CTXT_CHECK_PARTITION_KEY_VALUE_SHIFT;
+ write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_PARTITION_KEY, reg);
+ reg = read_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE);
+ reg |= SEND_CTXT_CHECK_ENABLE_CHECK_PARTITION_KEY_SMASK;
+ write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE, reg);
+done:
+ return ret;
+}
+
+int hfi1_clear_ctxt_pkey(struct hfi1_devdata *dd, unsigned ctxt)
+{
+ struct hfi1_ctxtdata *rcd;
+ unsigned sctxt;
+ int ret = 0;
+ u64 reg;
+
+ if (ctxt < dd->num_rcv_contexts)
+ rcd = dd->rcd[ctxt];
+ else {
+ ret = -EINVAL;
+ goto done;
+ }
+ if (!rcd || !rcd->sc) {
+ ret = -EINVAL;
+ goto done;
+ }
+ sctxt = rcd->sc->hw_context;
+ reg = read_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE);
+ reg &= ~SEND_CTXT_CHECK_ENABLE_CHECK_PARTITION_KEY_SMASK;
+ write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_ENABLE, reg);
+ write_kctxt_csr(dd, sctxt, SEND_CTXT_CHECK_PARTITION_KEY, 0);
+done:
+ return ret;
+}
+
+/*
+ * Start doing the clean up the the chip. Our clean up happens in multiple
+ * stages and this is just the first.
+ */
+void hfi1_start_cleanup(struct hfi1_devdata *dd)
+{
+ free_cntrs(dd);
+ free_rcverr(dd);
+ clean_up_interrupts(dd);
+}
+
+#define HFI_BASE_GUID(dev) \
+ (be64_to_cpu((dev)->base_guid) & ~(1ULL << GUID_HFI_INDEX_SHIFT))
+
+/*
+ * Certain chip functions need to be initialized only once per asic
+ * instead of per-device. This function finds the peer device and
+ * checks whether that chip initialization needs to be done by this
+ * device.
+ */
+static void asic_should_init(struct hfi1_devdata *dd)
+{
+ unsigned long flags;
+ struct hfi1_devdata *tmp, *peer = NULL;
+
+ spin_lock_irqsave(&hfi1_devs_lock, flags);
+ /* Find our peer device */
+ list_for_each_entry(tmp, &hfi1_dev_list, list) {
+ if ((HFI_BASE_GUID(dd) == HFI_BASE_GUID(tmp)) &&
+ dd->unit != tmp->unit) {
+ peer = tmp;
+ break;
+ }
+ }
+
+ /*
+ * "Claim" the ASIC for initialization if it hasn't been
+ " "claimed" yet.
+ */
+ if (!peer || !(peer->flags & HFI1_DO_INIT_ASIC))
+ dd->flags |= HFI1_DO_INIT_ASIC;
+ spin_unlock_irqrestore(&hfi1_devs_lock, flags);
+}
+
+/**
+ * Allocate an initialize the device structure for the hfi.
+ * @dev: the pci_dev for hfi1_ib device
+ * @ent: pci_device_id struct for this dev
+ *
+ * Also allocates, initializes, and returns the devdata struct for this
+ * device instance
+ *
+ * This is global, and is called directly at init to set up the
+ * chip-specific function pointers for later use.
+ */
+struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct hfi1_devdata *dd;
+ struct hfi1_pportdata *ppd;
+ u64 reg;
+ int i, ret;
+ static const char * const inames[] = { /* implementation names */
+ "RTL silicon",
+ "RTL VCS simulation",
+ "RTL FPGA emulation",
+ "Functional simulator"
+ };
+
+ dd = hfi1_alloc_devdata(pdev,
+ NUM_IB_PORTS * sizeof(struct hfi1_pportdata));
+ if (IS_ERR(dd))
+ goto bail;
+ ppd = dd->pport;
+ for (i = 0; i < dd->num_pports; i++, ppd++) {
+ int vl;
+ /* init common fields */
+ hfi1_init_pportdata(pdev, ppd, dd, 0, 1);
+ /* DC supports 4 link widths */
+ ppd->link_width_supported =
+ OPA_LINK_WIDTH_1X | OPA_LINK_WIDTH_2X |
+ OPA_LINK_WIDTH_3X | OPA_LINK_WIDTH_4X;
+ ppd->link_width_downgrade_supported =
+ ppd->link_width_supported;
+ /* start out enabling only 4X */
+ ppd->link_width_enabled = OPA_LINK_WIDTH_4X;
+ ppd->link_width_downgrade_enabled =
+ ppd->link_width_downgrade_supported;
+ /* link width active is 0 when link is down */
+ /* link width downgrade active is 0 when link is down */
+
+ switch (num_vls) {
+ case 1:
+ ppd->vls_supported = IB_VL_VL0;
+ break;
+ case 2:
+ ppd->vls_supported = IB_VL_VL0_1;
+ break;
+ default:
+ hfi1_early_err(&pdev->dev,
+ "Invalid num_vls %u, using 4 VLs\n",
+ num_vls);
+ num_vls = 4;
+ /* fall through */
+ case 4:
+ ppd->vls_supported = IB_VL_VL0_3;
+ break;
+ case 8:
+ ppd->vls_supported = IB_VL_VL0_7;
+ break;
+ }
+ ppd->vls_operational = ppd->vls_supported;
+ /* Set the default MTU. */
+ for (vl = 0; vl < num_vls; vl++)
+ dd->vld[vl].mtu = hfi1_max_mtu;
+ dd->vld[15].mtu = MAX_MAD_PACKET;
+ /*
+ * Set the initial values to reasonable default, will be set
+ * for real when link is up.
+ */
+ ppd->lstate = IB_PORT_DOWN;
+ ppd->overrun_threshold = 0x4;
+ ppd->phy_error_threshold = 0xf;
+ ppd->port_crc_mode_enabled = link_crc_mask;
+ /* initialize supported LTP CRC mode */
+ ppd->port_ltp_crc_mode = cap_to_port_ltp(link_crc_mask) << 8;
+ /* initialize enabled LTP CRC mode */
+ ppd->port_ltp_crc_mode |= cap_to_port_ltp(link_crc_mask) << 4;
+ /* start in offline */
+ ppd->host_link_state = HLS_DN_OFFLINE;
+ init_vl_arb_caches(ppd);
+ }
+
+ dd->link_default = HLS_DN_POLL;
+
+ /*
+ * Do remaining PCIe setup and save PCIe values in dd.
+ * Any error printing is already done by the init code.
+ * On return, we have the chip mapped.
+ */
+ ret = hfi1_pcie_ddinit(dd, pdev, ent);
+ if (ret < 0)
+ goto bail_free;
+
+ /* verify that reads actually work, save revision for reset check */
+ dd->revision = read_csr(dd, CCE_REVISION);
+ if (dd->revision == ~(u64)0) {
+ dd_dev_err(dd, "cannot read chip CSRs\n");
+ ret = -EINVAL;
+ goto bail_cleanup;
+ }
+ dd->majrev = (dd->revision >> CCE_REVISION_CHIP_REV_MAJOR_SHIFT)
+ & CCE_REVISION_CHIP_REV_MAJOR_MASK;
+ dd->minrev = (dd->revision >> CCE_REVISION_CHIP_REV_MINOR_SHIFT)
+ & CCE_REVISION_CHIP_REV_MINOR_MASK;
+
+ /* obtain the hardware ID - NOT related to unit, which is a
+ software enumeration */
+ reg = read_csr(dd, CCE_REVISION2);
+ dd->hfi1_id = (reg >> CCE_REVISION2_HFI_ID_SHIFT)
+ & CCE_REVISION2_HFI_ID_MASK;
+ /* the variable size will remove unwanted bits */
+ dd->icode = reg >> CCE_REVISION2_IMPL_CODE_SHIFT;
+ dd->irev = reg >> CCE_REVISION2_IMPL_REVISION_SHIFT;
+ dd_dev_info(dd, "Implementation: %s, revision 0x%x\n",
+ dd->icode < ARRAY_SIZE(inames) ? inames[dd->icode] : "unknown",
+ (int)dd->irev);
+
+ /* speeds the hardware can support */
+ dd->pport->link_speed_supported = OPA_LINK_SPEED_25G;
+ /* speeds allowed to run at */
+ dd->pport->link_speed_enabled = dd->pport->link_speed_supported;
+ /* give a reasonable active value, will be set on link up */
+ dd->pport->link_speed_active = OPA_LINK_SPEED_25G;
+
+ dd->chip_rcv_contexts = read_csr(dd, RCV_CONTEXTS);
+ dd->chip_send_contexts = read_csr(dd, SEND_CONTEXTS);
+ dd->chip_sdma_engines = read_csr(dd, SEND_DMA_ENGINES);
+ dd->chip_pio_mem_size = read_csr(dd, SEND_PIO_MEM_SIZE);
+ dd->chip_sdma_mem_size = read_csr(dd, SEND_DMA_MEM_SIZE);
+ /* fix up link widths for emulation _p */
+ ppd = dd->pport;
+ if (dd->icode == ICODE_FPGA_EMULATION && is_emulator_p(dd)) {
+ ppd->link_width_supported =
+ ppd->link_width_enabled =
+ ppd->link_width_downgrade_supported =
+ ppd->link_width_downgrade_enabled =
+ OPA_LINK_WIDTH_1X;
+ }
+ /* insure num_vls isn't larger than number of sdma engines */
+ if (HFI1_CAP_IS_KSET(SDMA) && num_vls > dd->chip_sdma_engines) {
+ dd_dev_err(dd, "num_vls %u too large, using 4 VLs\n",
+ num_vls);
+ num_vls = 4;
+ ppd->vls_supported = IB_VL_VL0_3;
+ ppd->vls_operational = ppd->vls_supported;
+ }
+
+ /*
+ * Convert the ns parameter to the 64 * cclocks used in the CSR.
+ * Limit the max if larger than the field holds. If timeout is
+ * non-zero, then the calculated field will be at least 1.
+ *
+ * Must be after icode is set up - the cclock rate depends
+ * on knowing the hardware being used.
+ */
+ dd->rcv_intr_timeout_csr = ns_to_cclock(dd, rcv_intr_timeout) / 64;
+ if (dd->rcv_intr_timeout_csr >
+ RCV_AVAIL_TIME_OUT_TIME_OUT_RELOAD_MASK)
+ dd->rcv_intr_timeout_csr =
+ RCV_AVAIL_TIME_OUT_TIME_OUT_RELOAD_MASK;
+ else if (dd->rcv_intr_timeout_csr == 0 && rcv_intr_timeout)
+ dd->rcv_intr_timeout_csr = 1;
+
+ /* obtain chip sizes, reset chip CSRs */
+ init_chip(dd);
+
+ /* read in the PCIe link speed information */
+ ret = pcie_speeds(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ /* needs to be done before we look for the peer device */
+ read_guid(dd);
+
+ asic_should_init(dd);
+
+ /* read in firmware */
+ ret = hfi1_firmware_init(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ /*
+ * In general, the PCIe Gen3 transition must occur after the
+ * chip has been idled (so it won't initiate any PCIe transactions
+ * e.g. an interrupt) and before the driver changes any registers
+ * (the transition will reset the registers).
+ *
+ * In particular, place this call after:
+ * - init_chip() - the chip will not initiate any PCIe transactions
+ * - pcie_speeds() - reads the current link speed
+ * - hfi1_firmware_init() - the needed firmware is ready to be
+ * downloaded
+ */
+ ret = do_pcie_gen3_transition(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ /* start setting dd values and adjusting CSRs */
+ init_early_variables(dd);
+
+ parse_platform_config(dd);
+
+ /* add board names as they are defined */
+ dd->boardname = kmalloc(64, GFP_KERNEL);
+ if (!dd->boardname)
+ goto bail_cleanup;
+ snprintf(dd->boardname, 64, "Board ID 0x%llx",
+ dd->revision >> CCE_REVISION_BOARD_ID_LOWER_NIBBLE_SHIFT
+ & CCE_REVISION_BOARD_ID_LOWER_NIBBLE_MASK);
+
+ snprintf(dd->boardversion, BOARD_VERS_MAX,
+ "ChipABI %u.%u, %s, ChipRev %u.%u, SW Compat %llu\n",
+ HFI1_CHIP_VERS_MAJ, HFI1_CHIP_VERS_MIN,
+ dd->boardname,
+ (u32)dd->majrev,
+ (u32)dd->minrev,
+ (dd->revision >> CCE_REVISION_SW_SHIFT)
+ & CCE_REVISION_SW_MASK);
+
+ ret = set_up_context_variables(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ /* set initial RXE CSRs */
+ init_rxe(dd);
+ /* set initial TXE CSRs */
+ init_txe(dd);
+ /* set initial non-RXE, non-TXE CSRs */
+ init_other(dd);
+ /* set up KDETH QP prefix in both RX and TX CSRs */
+ init_kdeth_qp(dd);
+
+ /* send contexts must be set up before receive contexts */
+ ret = init_send_contexts(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ ret = hfi1_create_ctxts(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ dd->rcvhdrsize = DEFAULT_RCVHDRSIZE;
+ /*
+ * rcd[0] is guaranteed to be valid by this point. Also, all
+ * context are using the same value, as per the module parameter.
+ */
+ dd->rhf_offset = dd->rcd[0]->rcvhdrqentsize - sizeof(u64) / sizeof(u32);
+
+ ret = init_pervl_scs(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ /* sdma init */
+ for (i = 0; i < dd->num_pports; ++i) {
+ ret = sdma_init(dd, i);
+ if (ret)
+ goto bail_cleanup;
+ }
+
+ /* use contexts created by hfi1_create_ctxts */
+ ret = set_up_interrupts(dd);
+ if (ret)
+ goto bail_cleanup;
+
+ /* set up LCB access - must be after set_up_interrupts() */
+ init_lcb_access(dd);
+
+ /*
+ * GUID is now stored in big endian by the function above, swap it.
+ *
+ * Despite the multiple uses here there are more uses of the GUID in big
+ * endian format, mostly in the mad layer. At some point we should
+ * convert to host byte order and convert to network when we want to
+ * stuff it into a packet.
+ */
+ snprintf(dd->serial, SERIAL_MAX, "0x%08llx\n",
+ be64_to_cpu(dd->base_guid) & 0xFFFFFF);
+
+ dd->oui1 = be64_to_cpu(dd->base_guid) >> 56 & 0xFF;
+ dd->oui2 = be64_to_cpu(dd->base_guid) >> 48 & 0xFF;
+ dd->oui3 = be64_to_cpu(dd->base_guid) >> 40 & 0xFF;
+
+ ret = load_firmware(dd); /* asymmetric with dispose_firmware() */
+ if (ret)
+ goto bail_clear_intr;
+ check_fabric_firmware_versions(dd);
+
+ thermal_init(dd);
+
+ ret = init_cntrs(dd);
+ if (ret)
+ goto bail_clear_intr;
+
+ ret = init_rcverr(dd);
+ if (ret)
+ goto bail_free_cntrs;
+
+ ret = eprom_init(dd);
+ if (ret)
+ goto bail_free_rcverr;
+
+ goto bail;
+
+bail_free_rcverr:
+ free_rcverr(dd);
+bail_free_cntrs:
+ free_cntrs(dd);
+bail_clear_intr:
+ clean_up_interrupts(dd);
+bail_cleanup:
+ hfi1_pcie_ddcleanup(dd);
+bail_free:
+ hfi1_free_devdata(dd);
+ dd = ERR_PTR(ret);
+bail:
+ return dd;
+}
+
+static u16 delay_cycles(struct hfi1_pportdata *ppd, u32 desired_egress_rate,
+ u32 dw_len)
+{
+ u32 delta_cycles;
+ u32 current_egress_rate = ppd->current_egress_rate;
+ /* rates here are in units of 10^6 bits/sec */
+
+ if (desired_egress_rate == -1)
+ return 0; /* shouldn't happen */
+
+ if (desired_egress_rate >= current_egress_rate)
+ return 0; /* we can't help go faster, only slower */
+
+ delta_cycles = egress_cycles(dw_len * 4, desired_egress_rate) -
+ egress_cycles(dw_len * 4, current_egress_rate);
+
+ return (u16)delta_cycles;
+}
+
+
+/**
+ * create_pbc - build a pbc for transmission
+ * @flags: special case flags or-ed in built pbc
+ * @srate: static rate
+ * @vl: vl
+ * @dwlen: dword length (header words + data words + pbc words)
+ *
+ * Create a PBC with the given flags, rate, VL, and length.
+ *
+ * NOTE: The PBC created will not insert any HCRC - all callers but one are
+ * for verbs, which does not use this PSM feature. The lone other caller
+ * is for the diagnostic interface which calls this if the user does not
+ * supply their own PBC.
+ */
+u64 create_pbc(struct hfi1_pportdata *ppd, u64 flags, int srate_mbs, u32 vl,
+ u32 dw_len)
+{
+ u64 pbc, delay = 0;
+
+ if (unlikely(srate_mbs))
+ delay = delay_cycles(ppd, srate_mbs, dw_len);
+
+ pbc = flags
+ | (delay << PBC_STATIC_RATE_CONTROL_COUNT_SHIFT)
+ | ((u64)PBC_IHCRC_NONE << PBC_INSERT_HCRC_SHIFT)
+ | (vl & PBC_VL_MASK) << PBC_VL_SHIFT
+ | (dw_len & PBC_LENGTH_DWS_MASK)
+ << PBC_LENGTH_DWS_SHIFT;
+
+ return pbc;
+}
+
+#define SBUS_THERMAL 0x4f
+#define SBUS_THERM_MONITOR_MODE 0x1
+
+#define THERM_FAILURE(dev, ret, reason) \
+ dd_dev_err((dd), \
+ "Thermal sensor initialization failed: %s (%d)\n", \
+ (reason), (ret))
+
+/*
+ * Initialize the Avago Thermal sensor.
+ *
+ * After initialization, enable polling of thermal sensor through
+ * SBus interface. In order for this to work, the SBus Master
+ * firmware has to be loaded due to the fact that the HW polling
+ * logic uses SBus interrupts, which are not supported with
+ * default firmware. Otherwise, no data will be returned through
+ * the ASIC_STS_THERM CSR.
+ */
+static int thermal_init(struct hfi1_devdata *dd)
+{
+ int ret = 0;
+
+ if (dd->icode != ICODE_RTL_SILICON ||
+ !(dd->flags & HFI1_DO_INIT_ASIC))
+ return ret;
+
+ acquire_hw_mutex(dd);
+ dd_dev_info(dd, "Initializing thermal sensor\n");
+ /* Thermal Sensor Initialization */
+ /* Step 1: Reset the Thermal SBus Receiver */
+ ret = sbus_request_slow(dd, SBUS_THERMAL, 0x0,
+ RESET_SBUS_RECEIVER, 0);
+ if (ret) {
+ THERM_FAILURE(dd, ret, "Bus Reset");
+ goto done;
+ }
+ /* Step 2: Set Reset bit in Thermal block */
+ ret = sbus_request_slow(dd, SBUS_THERMAL, 0x0,
+ WRITE_SBUS_RECEIVER, 0x1);
+ if (ret) {
+ THERM_FAILURE(dd, ret, "Therm Block Reset");
+ goto done;
+ }
+ /* Step 3: Write clock divider value (100MHz -> 2MHz) */
+ ret = sbus_request_slow(dd, SBUS_THERMAL, 0x1,
+ WRITE_SBUS_RECEIVER, 0x32);
+ if (ret) {
+ THERM_FAILURE(dd, ret, "Write Clock Div");
+ goto done;
+ }
+ /* Step 4: Select temperature mode */
+ ret = sbus_request_slow(dd, SBUS_THERMAL, 0x3,
+ WRITE_SBUS_RECEIVER,
+ SBUS_THERM_MONITOR_MODE);
+ if (ret) {
+ THERM_FAILURE(dd, ret, "Write Mode Sel");
+ goto done;
+ }
+ /* Step 5: De-assert block reset and start conversion */
+ ret = sbus_request_slow(dd, SBUS_THERMAL, 0x0,
+ WRITE_SBUS_RECEIVER, 0x2);
+ if (ret) {
+ THERM_FAILURE(dd, ret, "Write Reset Deassert");
+ goto done;
+ }
+ /* Step 5.1: Wait for first conversion (21.5ms per spec) */
+ msleep(22);
+
+ /* Enable polling of thermal readings */
+ write_csr(dd, ASIC_CFG_THERM_POLL_EN, 0x1);
+done:
+ release_hw_mutex(dd);
+ return ret;
+}
+
+static void handle_temp_err(struct hfi1_devdata *dd)
+{
+ struct hfi1_pportdata *ppd = &dd->pport[0];
+ /*
+ * Thermal Critical Interrupt
+ * Put the device into forced freeze mode, take link down to
+ * offline, and put DC into reset.
+ */
+ dd_dev_emerg(dd,
+ "Critical temperature reached! Forcing device into freeze mode!\n");
+ dd->flags |= HFI1_FORCED_FREEZE;
+ start_freeze_handling(ppd, FREEZE_SELF|FREEZE_ABORT);
+ /*
+ * Shut DC down as much and as quickly as possible.
+ *
+ * Step 1: Take the link down to OFFLINE. This will cause the
+ * 8051 to put the Serdes in reset. However, we don't want to
+ * go through the entire link state machine since we want to
+ * shutdown ASAP. Furthermore, this is not a graceful shutdown
+ * but rather an attempt to save the chip.
+ * Code below is almost the same as quiet_serdes() but avoids
+ * all the extra work and the sleeps.
+ */
+ ppd->driver_link_ready = 0;
+ ppd->link_enabled = 0;
+ set_physical_link_state(dd, PLS_OFFLINE |
+ (OPA_LINKDOWN_REASON_SMA_DISABLED << 8));
+ /*
+ * Step 2: Shutdown LCB and 8051
+ * After shutdown, do not restore DC_CFG_RESET value.
+ */
+ dc_shutdown(dd);
+}
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
