Enable reading additional EEPROM information from high pages such as
thresholds and alarms on QSFP/QSFP+/QSFP28 modules.
"This is similar to commit a708fb7b1f8d ("net/mlx5e: ethtool, Add
support for EEPROM high pages query") but given all the required logic
already exists in mlx4_qsfp_eeprom_params_set() only s/_LEN/MAX_LEN/ is
needed.
Tested-by: Dan Merillat <git@xxxxxxxxxxxxxxxx>
Signed-off-by: Krzysztof Piotr Oledzki <ole@xxxxxx>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index 619e1c3ef7f9..aca968b4dc15 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -2055,20 +2055,20 @@ static int mlx4_en_get_module_info(struct net_device *dev,
switch (data[0] /* identifier */) {
case MLX4_MODULE_ID_QSFP:
modinfo->type = ETH_MODULE_SFF_8436;
- modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
break;
case MLX4_MODULE_ID_QSFP_PLUS:
if (data[1] >= 0x3) { /* revision id */
modinfo->type = ETH_MODULE_SFF_8636;
- modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
} else {
modinfo->type = ETH_MODULE_SFF_8436;
- modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8436_MAX_LEN;
}
break;
case MLX4_MODULE_ID_QSFP28:
modinfo->type = ETH_MODULE_SFF_8636;
- modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8636_MAX_LEN;
break;
case MLX4_MODULE_ID_SFP:
modinfo->type = ETH_MODULE_SFF_8472;
--
2.45.2
