Convert open coded RMW accesses for LNKCTL2 to use
pcie_capability_clear_and_set_word() which makes its easier to
understand what the code tries to do.
In addition, this futureproofs the code. LNKCTL2 is not really owned by
any driver because it is a collection of control bits that PCI core
might need to touch. RMW accessors already have support for proper
locking for a selected set of registers to avoid losing concurrent
updates (LNKCTL2 is not yet among the registers that need protection
but likely will be in the future).
Suggested-by: Lukas Wunner <lukas@xxxxxxxxx>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Reviewed-by: Dean Luick <dean.luick@xxxxxxxxxxxxxxxxxxxx>
---
This was part of other series earlier but sending this indenpendent now
to not appear to be part of a cross subsystem series.
v2:
- Small improvements into the commit message
drivers/infiniband/hw/hfi1/pcie.c | 30 ++++++++----------------------
1 file changed, 8 insertions(+), 22 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 119ec2f1382b..7133964749f8 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -1207,14 +1207,11 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
(u32)lnkctl2);
/* only write to parent if target is not as high as ours */
if ((lnkctl2 & PCI_EXP_LNKCTL2_TLS) < target_vector) {
- lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
- lnkctl2 |= target_vector;
- dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
- (u32)lnkctl2);
- ret = pcie_capability_write_word(parent,
- PCI_EXP_LNKCTL2, lnkctl2);
+ ret = pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL2,
+ PCI_EXP_LNKCTL2_TLS,
+ target_vector);
if (ret) {
- dd_dev_err(dd, "Unable to write to PCI config\n");
+ dd_dev_err(dd, "Unable to change parent PCI target speed\n");
return_error = 1;
goto done;
}
@@ -1223,22 +1220,11 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
}
dd_dev_info(dd, "%s: setting target link speed\n", __func__);
- ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2);
+ ret = pcie_capability_clear_and_set_word(dd->pcidev, PCI_EXP_LNKCTL2,
+ PCI_EXP_LNKCTL2_TLS,
+ target_vector);
if (ret) {
- dd_dev_err(dd, "Unable to read from PCI config\n");
- return_error = 1;
- goto done;
- }
-
- dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,
- (u32)lnkctl2);
- lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
- lnkctl2 |= target_vector;
- dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
- (u32)lnkctl2);
- ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2);
- if (ret) {
- dd_dev_err(dd, "Unable to write to PCI config\n");
+ dd_dev_err(dd, "Unable to change device PCI target speed\n");
return_error = 1;
goto done;
}
--
2.39.2
