Address spelling errors flagged by codespell. This patch follows-up on an earlier patch by Colin Ian King, which addressed a spelling error in a user-visible log message [1]. This patch includes that change. [1] https://lore.kernel.org/netdev/20231209225135.4055334-1-colin.i.king@xxxxxxxxx/ This patch is intended to cover all files under drivers/net/ethernet/mellanox/mlx4 Signed-off-by: Simon Horman <horms@xxxxxxxxxx> --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 7 ++++--- drivers/net/ethernet/mellanox/mlx4/cq.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/en_clock.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 5 +++-- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 2 +- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 2 +- drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +- drivers/net/ethernet/mellanox/mlx4/fw_qos.h | 8 ++++---- drivers/net/ethernet/mellanox/mlx4/main.c | 4 ++-- drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h | 2 +- drivers/net/ethernet/mellanox/mlx4/port.c | 2 +- 11 files changed, 22 insertions(+), 20 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index f5b1f8c7834f..7f20813456e2 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -2199,8 +2199,9 @@ static void mlx4_master_do_cmd(struct mlx4_dev *dev, int slave, u8 cmd, if (cmd != MLX4_COMM_CMD_RESET) { mlx4_warn(dev, "Turn on internal error to force reset, slave=%d, cmd=0x%x\n", slave, cmd); - /* Turn on internal error letting slave reset itself immeditaly, - * otherwise it might take till timeout on command is passed + /* Turn on internal error letting slave reset itself + * immediately, otherwise it might take till timeout on + * command is passed */ reply |= ((u32)COMM_CHAN_EVENT_INTERNAL_ERR); } @@ -2954,7 +2955,7 @@ static bool mlx4_valid_vf_state_change(struct mlx4_dev *dev, int port, dummy_admin.default_vlan = vlan; /* VF wants to move to other VST state which is valid with current - * rate limit. Either differnt default vlan in VST or other + * rate limit. Either different default vlan in VST or other * supported QoS priority. Otherwise we don't allow this change when * the TX rate is still configured. */ diff --git a/drivers/net/ethernet/mellanox/mlx4/cq.c b/drivers/net/ethernet/mellanox/mlx4/cq.c index 4d4f9cf9facb..e130e7259275 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cq.c +++ b/drivers/net/ethernet/mellanox/mlx4/cq.c @@ -115,7 +115,7 @@ void mlx4_cq_completion(struct mlx4_dev *dev, u32 cqn) return; } - /* Acessing the CQ outside of rcu_read_lock is safe, because + /* Accessing the CQ outside of rcu_read_lock is safe, because * the CQ is freed only after interrupt handling is completed. */ ++cq->arm_sn; @@ -137,7 +137,7 @@ void mlx4_cq_event(struct mlx4_dev *dev, u32 cqn, int event_type) return; } - /* Acessing the CQ outside of rcu_read_lock is safe, because + /* Accessing the CQ outside of rcu_read_lock is safe, because * the CQ is freed only after interrupt handling is completed. */ cq->event(cq, event_type); diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c index 9e3b76182088..cd754cd76bde 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c @@ -96,8 +96,8 @@ void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev) #define MLX4_EN_WRAP_AROUND_SEC 10UL /* By scheduling the overflow check every 5 seconds, we have a reasonably - * good chance we wont miss a wrap around. - * TOTO: Use a timer instead of a work queue to increase the guarantee. + * good chance we won't miss a wrap around. + * TODO: Use a timer instead of a work queue to increase the guarantee. */ #define MLX4_EN_OVERFLOW_PERIOD (MLX4_EN_WRAP_AROUND_SEC * HZ / 2) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 33bbcced8105..d7da62cda821 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1072,7 +1072,8 @@ static void mlx4_en_do_multicast(struct mlx4_en_priv *priv, 1, MLX4_MCAST_CONFIG); /* Update multicast list - we cache all addresses so they won't - * change while HW is updated holding the command semaphor */ + * change while HW is updated holding the command semaphore + */ netif_addr_lock_bh(dev); mlx4_en_cache_mclist(dev); netif_addr_unlock_bh(dev); @@ -1817,7 +1818,7 @@ int mlx4_en_start_port(struct net_device *dev) mlx4_en_set_rss_steer_rules(priv)) mlx4_warn(mdev, "Failed setting steering rules\n"); - /* Attach rx QP to bradcast address */ + /* Attach rx QP to broadcast address */ eth_broadcast_addr(&mc_list[10]); mc_list[5] = priv->port; /* needed for B0 steering support */ if (mlx4_multicast_attach(mdev->dev, priv->rss_map.indir_qp, mc_list, diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index a09b6e05337d..eac49657bd07 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -762,7 +762,7 @@ int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int bud /* Drop packet on bad receive or bad checksum */ if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_CQE_OPCODE_ERROR)) { - en_err(priv, "CQE completed in error - vendor syndrom:%d syndrom:%d\n", + en_err(priv, "CQE completed in error - vendor syndrome:%d syndrome:%d\n", ((struct mlx4_err_cqe *)cqe)->vendor_err_syndrome, ((struct mlx4_err_cqe *)cqe)->syndrome); goto next; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 65cb63f6c465..1ddb11cb25f9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -992,7 +992,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) tx_info->ts_requested = 1; } - /* Prepare ctrl segement apart opcode+ownership, which depends on + /* Prepare ctrl segment apart opcode+ownership, which depends on * whether LSO is used */ tx_desc->ctrl.srcrb_flags = priv->ctrl_flags; if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index 6598b10a9ff4..9572a45f6143 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -210,7 +210,7 @@ static void slave_event(struct mlx4_dev *dev, u8 slave, struct mlx4_eqe *eqe) memcpy(s_eqe, eqe, sizeof(struct mlx4_eqe) - 1); s_eqe->slave_id = slave; - /* ensure all information is written before setting the ownersip bit */ + /* ensure all information is written before setting the ownership bit */ dma_wmb(); s_eqe->owner = !!(slave_eq->prod & SLAVE_EVENT_EQ_SIZE) ? 0x0 : 0x80; ++slave_eq->prod; diff --git a/drivers/net/ethernet/mellanox/mlx4/fw_qos.h b/drivers/net/ethernet/mellanox/mlx4/fw_qos.h index 954b86faac29..40ca29bb928c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw_qos.h +++ b/drivers/net/ethernet/mellanox/mlx4/fw_qos.h @@ -44,7 +44,7 @@ /* Default supported priorities for VPP allocation */ #define MLX4_DEFAULT_QOS_PRIO (0) -/* Derived from FW feature definition, 0 is the default vport fo all QPs */ +/* Derived from FW feature definition, 0 is the default vport for all QPs */ #define MLX4_VPP_DEFAULT_VPORT (0) struct mlx4_vport_qos_param { @@ -98,7 +98,7 @@ int mlx4_SET_PORT_SCHEDULER(struct mlx4_dev *dev, u8 port, u8 *tc_tx_bw, int mlx4_ALLOCATE_VPP_get(struct mlx4_dev *dev, u8 port, u16 *available_vpp, u8 *vpp_p_up); /** - * mlx4_ALLOCATE_VPP_set - Distribution of VPPs among differnt priorities. + * mlx4_ALLOCATE_VPP_set - Distribution of VPPs among different priorities. * The total number of VPPs assigned to all for a port must not exceed * the value reported by available_vpp in mlx4_ALLOCATE_VPP_get. * VPP allocation is allowed only after the port type has been set, @@ -113,7 +113,7 @@ int mlx4_ALLOCATE_VPP_get(struct mlx4_dev *dev, u8 port, int mlx4_ALLOCATE_VPP_set(struct mlx4_dev *dev, u8 port, u8 *vpp_p_up); /** - * mlx4_SET_VPORT_QOS_get - Query QoS proporties of a Vport. + * mlx4_SET_VPORT_QOS_get - Query QoS properties of a Vport. * Each priority allowed for the Vport is assigned with a share of the BW, * and a BW limitation. This commands query the current QoS values. * @@ -128,7 +128,7 @@ int mlx4_SET_VPORT_QOS_get(struct mlx4_dev *dev, u8 port, u8 vport, struct mlx4_vport_qos_param *out_param); /** - * mlx4_SET_VPORT_QOS_set - Set QoS proporties of a Vport. + * mlx4_SET_VPORT_QOS_set - Set QoS properties of a Vport. * QoS parameters can be modified at any time, but must be initialized * before any QP is associated with the VPort. * diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 2581226836b5..7b02ff61126d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -129,7 +129,7 @@ static const struct mlx4_profile default_profile = { .num_cq = 1 << 16, .num_mcg = 1 << 13, .num_mpt = 1 << 19, - .num_mtt = 1 << 20, /* It is really num mtt segements */ + .num_mtt = 1 << 20, /* It is really num mtt segments */ }; static const struct mlx4_profile low_mem_profile = { @@ -1508,7 +1508,7 @@ static int mlx4_port_map_set(struct mlx4_dev *dev, struct mlx4_port_map *v2p) priv->v2p.port1 = port1; priv->v2p.port2 = port2; } else { - mlx4_err(dev, "Failed to change port mape: %d\n", err); + mlx4_err(dev, "Failed to change port map: %d\n", err); } } diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h index e9cd4bb6f83d..d3d9ec042d2c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_stats.h @@ -112,7 +112,7 @@ struct mlx4_en_stat_out_flow_control_mbox { __be64 tx_pause_duration; /* Number of transmitter transitions from XOFF state to XON state */ __be64 tx_pause_transition; - /* Reserverd */ + /* Reserved */ __be64 reserved[2]; }; diff --git a/drivers/net/ethernet/mellanox/mlx4/port.c b/drivers/net/ethernet/mellanox/mlx4/port.c index 256a06b3c096..4e43f4a7d246 100644 --- a/drivers/net/ethernet/mellanox/mlx4/port.c +++ b/drivers/net/ethernet/mellanox/mlx4/port.c @@ -2118,7 +2118,7 @@ static void mlx4_qsfp_eeprom_params_set(u8 *i2c_addr, u8 *page_num, u16 *offset) * @data: output buffer to put the requested data into. * * Reads cable module eeprom data, puts the outcome data into - * data pointer paramer. + * data pointer parameter. * Returns num of read bytes on success or a negative error * code. */
