On 6/23/23 04:57, Zhu Yanjun wrote: > From: Zhu Yanjun <yanjun.zhu@xxxxxxxxx> > > When run "ip link add" command to add a rxe rdma link in a net > namespace, normally this rxe rdma link can not work in a net > name space. > > The root cause is that a sock listening on udp port 4791 is created > in init_net when the rdma_rxe module is loaded into kernel. That is, > the sock listening on udp port 4791 is created in init_net. Other net > namespace is difficult to use this sock. > > The following commits will solve this problem. > > In the first commit, move the creating sock listening on udp port 4791 > from module_init function to rdma link creating functions. That is, > after the module rdma_rxe is loaded, the sock will not be created. > When run "rdma link add ..." command, the sock will be created. So > when creating a rdma link in the net namespace, the sock will be > created in this net namespace. > > In the second commit, the functions udp4_lib_lookup and udp6_lib_lookup > will check the sock exists in the net namespace or not. If yes, rdma > link will increase the reference count of this sock, then continue other > jobs instead of creating a new sock to listen on udp port 4791. Since the > network notifier is global, when the module rdma_rxe is loaded, this > notifier will be registered. > > After the rdma link is created, the command "rdma link del" is to > delete rdma link at the same time the sock is checked. If the reference > count of this sock is greater than the sock reference count needed by > udp tunnel, the sock reference count is decreased by one. If equal, it > indicates that this rdma link is the last one. As such, the udp tunnel > is shut down and the sock is closed. The above work should be > implemented in linkdel function. But currently no dellink function in > rxe. So the 3rd commit addes dellink function pointer. And the 4th > commit implements the dellink function in rxe. > > To now, it is not necessary to keep a global variable to store the sock > listening udp port 4791. This global variable can be replaced by the > functions udp4_lib_lookup and udp6_lib_lookup totally. Because the > function udp6_lib_lookup is in the fast path, a member variable l_sk6 > is added to store the sock. If l_sk6 is NULL, udp6_lib_lookup is called > to lookup the sock, then the sock is stored in l_sk6, in the future,it > can be used directly. > > All the above work has been done in init_net. And it can also work in > the net namespace. So the init_net is replaced by the individual net > namespace. This is what the 6th commit does. Because rxe device is > dependent on the net device and the sock listening on udp port 4791, > every rxe device is in exclusive mode in the individual net namespace. > Other rdma netns operations will be considerred in the future. > > In the 7th commit, the register_pernet_subsys/unregister_pernet_subsys > functions are added. When a new net namespace is created, the init > function will initialize the sk4 and sk6 socks. Then the 2 socks will > be released when the net namespace is destroyed. The functions > rxe_ns_pernet_sk4/rxe_ns_pernet_set_sk4 will get and set sk4 in the net > namespace. The functions rxe_ns_pernet_sk6/rxe_ns_pernet_set_sk6 will > handle sk6. Then sk4 and sk6 are used in the previous commits. > > As the sk4 and sk6 in pernet namespace can be accessed, it is not > necessary to add a new l_sk6. As such, in the 8th commit, the l_sk6 is > replaced with the sk6 in pernet namespace. > > Test steps: > 1) Suppose that 2 NICs are in 2 different net namespaces. > > # ip netns exec net0 ip link > 3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > link/ether 00:1e:67:a0:22:3f brd ff:ff:ff:ff:ff:ff > altname enp5s0 > > # ip netns exec net1 ip link > 4: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel > link/ether f8:e4:3b:3b:e4:10 brd ff:ff:ff:ff:ff:ff > > 2) Add rdma link in the different net namespace > net0: > # ip netns exec net0 rdma link add rxe0 type rxe netdev eno2 > > net1: > # ip netns exec net1 rdma link add rxe1 type rxe netdev eno3 > > 3) Run rping test. > net0 > # ip netns exec net0 rping -s -a 192.168.2.1 -C 1& > [1] 1737 > # ip netns exec net1 rping -c -a 192.168.2.1 -d -v -C 1 > verbose > count 1 > ... > ping data: rdma-ping-0: ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqr > ... > > 4) Remove the rdma links from the net namespaces. > net0: > # ip netns exec net0 ss -lu > State Recv-Q Send-Q Local Address:Port Peer Address:Port Process > UNCONN 0 0 0.0.0.0:4791 0.0.0.0:* > UNCONN 0 0 [::]:4791 [::]:* > > # ip netns exec net0 rdma link del rxe0 > > # ip netns exec net0 ss -lu > State Recv-Q Send-Q Local Address:Port Peer Address:Port Process > > net1: > # ip netns exec net0 ss -lu > State Recv-Q Send-Q Local Address:Port Peer Address:Port Process > UNCONN 0 0 0.0.0.0:4791 0.0.0.0:* > UNCONN 0 0 [::]:4791 [::]:* > > # ip netns exec net1 rdma link del rxe1 > > # ip netns exec net0 ss -lu > State Recv-Q Send-Q Local Address:Port Peer Address:Port Process > > V5->V6: Fix resource leak problem when rxe_net_init fails. And fix some > style problems. > > V4->V5: Rebase the commits to V6.4-rc1 > > V3->V4: Rebase the commits to rdma-next; > > V2->V3: 1) Add "rdma link del" example in the cover letter, and use "ss -lu" to > verify rdma link is removed. > 2) Add register_pernet_subsys/unregister_pernet_subsys net namespace > 3) Replace l_sk6 with sk6 of pernet_name_space > > V1->V2: Add the explicit initialization of sk6. > > Zhu Yanjun (8): > RDMA/rxe: Creating listening sock in newlink function > RDMA/rxe: Support more rdma links in init_net > RDMA/nldev: Add dellink function pointer > RDMA/rxe: Implement dellink in rxe > RDMA/rxe: Replace global variable with sock lookup functions > RDMA/rxe: add the support of net namespace > RDMA/rxe: Add the support of net namespace notifier > RDMA/rxe: Replace l_sk6 with sk6 in net namespace > > drivers/infiniband/core/nldev.c | 6 ++ > drivers/infiniband/sw/rxe/Makefile | 3 +- > drivers/infiniband/sw/rxe/rxe.c | 35 +++++++- > drivers/infiniband/sw/rxe/rxe_net.c | 119 ++++++++++++++++++------ > drivers/infiniband/sw/rxe/rxe_net.h | 9 +- > drivers/infiniband/sw/rxe/rxe_ns.c | 134 ++++++++++++++++++++++++++++ > drivers/infiniband/sw/rxe/rxe_ns.h | 17 ++++ > include/rdma/rdma_netlink.h | 2 + > 8 files changed, 285 insertions(+), 40 deletions(-) > create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.c > create mode 100644 drivers/infiniband/sw/rxe/rxe_ns.h > I am OOO until Monday evening. I will try it then. Bob
