Add a new CMDQ message to configure hardware. Initially the page size (in
the format of shift) will be passed to hardware, so that hardware can
organize the mmio space properly. It's called only if hardware supports it.
Signed-off-by: Cheng Xu <chengyou@xxxxxxxxxxxxxxxxx>
---
drivers/infiniband/hw/erdma/erdma_hw.h | 12 ++++++++++++
drivers/infiniband/hw/erdma/erdma_main.c | 20 ++++++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/drivers/infiniband/hw/erdma/erdma_hw.h b/drivers/infiniband/hw/erdma/erdma_hw.h
index 76ce2856be28..670796c22bcc 100644
--- a/drivers/infiniband/hw/erdma/erdma_hw.h
+++ b/drivers/infiniband/hw/erdma/erdma_hw.h
@@ -159,6 +159,7 @@ enum CMDQ_COMMON_OPCODE {
CMDQ_OPCODE_DESTROY_EQ = 1,
CMDQ_OPCODE_QUERY_FW_INFO = 2,
CMDQ_OPCODE_CONF_MTU = 3,
+ CMDQ_OPCODE_CONF_DEVICE = 5,
};
/* cmdq-SQE HDR */
@@ -196,6 +197,16 @@ struct erdma_cmdq_destroy_eq_req {
u8 qtype;
};
+/* config device cfg */
+#define ERDMA_CMD_CONFIG_DEVICE_PS_EN_MASK BIT(31)
+#define ERDMA_CMD_CONFIG_DEVICE_PGSHIFT_MASK GENMASK(4, 0)
+
+struct erdma_cmdq_config_device_req {
+ u64 hdr;
+ u32 cfg;
+ u32 rsvd[5];
+};
+
struct erdma_cmdq_config_mtu_req {
u64 hdr;
u32 mtu;
@@ -329,6 +340,7 @@ struct erdma_cmdq_reflush_req {
enum {
ERDMA_DEV_CAP_FLAGS_ATOMIC = 1 << 7,
+ ERDMA_DEV_CAP_FLAGS_EXTEND_DB = 1 << 3,
};
#define ERDMA_CMD_INFO0_FW_VER_MASK GENMASK_ULL(31, 0)
diff --git a/drivers/infiniband/hw/erdma/erdma_main.c b/drivers/infiniband/hw/erdma/erdma_main.c
index 7c74abeee864..525edea987b2 100644
--- a/drivers/infiniband/hw/erdma/erdma_main.c
+++ b/drivers/infiniband/hw/erdma/erdma_main.c
@@ -426,6 +426,22 @@ static int erdma_dev_attrs_init(struct erdma_dev *dev)
return err;
}
+static int erdma_device_config(struct erdma_dev *dev)
+{
+ struct erdma_cmdq_config_device_req req = {};
+
+ if (!(dev->attrs.cap_flags & ERDMA_DEV_CAP_FLAGS_EXTEND_DB))
+ return 0;
+
+ erdma_cmdq_build_reqhdr(&req.hdr, CMDQ_SUBMOD_COMMON,
+ CMDQ_OPCODE_CONF_DEVICE);
+
+ req.cfg = FIELD_PREP(ERDMA_CMD_CONFIG_DEVICE_PGSHIFT_MASK, PAGE_SHIFT) |
+ FIELD_PREP(ERDMA_CMD_CONFIG_DEVICE_PS_EN_MASK, 1);
+
+ return erdma_post_cmd_wait(&dev->cmdq, &req, sizeof(req), NULL, NULL);
+}
+
static int erdma_res_cb_init(struct erdma_dev *dev)
{
int i, j;
@@ -512,6 +528,10 @@ static int erdma_ib_device_add(struct pci_dev *pdev)
if (ret)
return ret;
+ ret = erdma_device_config(dev);
+ if (ret)
+ return ret;
+
ibdev->node_type = RDMA_NODE_RNIC;
memcpy(ibdev->node_desc, ERDMA_NODE_DESC, sizeof(ERDMA_NODE_DESC));
--
2.31.1
