From: Avihai Horon <avihaih@xxxxxxxxxx>
pcie_relaxed_ordering_enabled() check was added to avoid a syndrome when
creating a MKey with relaxed ordering (RO) enabled when the driver's
relaxed_ordering_{read,write} HCA capabilities are out of sync with FW.
While this can happen with relaxed_ordering_read, it can't happen with
relaxed_ordering_write as it's set if the device supports RO write,
regardless of RO in PCI config space, and thus can't change during
runtime.
Therefore, drop the pcie_relaxed_ordering_enabled() check for
relaxed_ordering_write while keeping it for relaxed_ordering_read.
Doing so will also allow the usage of RO write in VFs and VMs (where RO
in PCI config space is not reported/emulated properly).
Signed-off-by: Avihai Horon <avihaih@xxxxxxxxxx>
Reviewed-by: Shay Drory <shayd@xxxxxxxxxx>
Signed-off-by: Leon Romanovsky <leonro@xxxxxxxxxx>
---
drivers/infiniband/hw/mlx5/mr.c | 6 +++---
drivers/net/ethernet/mellanox/mlx5/core/en/params.c | 3 +--
drivers/net/ethernet/mellanox/mlx5/core/en_common.c | 2 +-
3 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index 347000d30cec..bb8f318bd5a5 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -69,11 +69,11 @@ static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
MLX5_SET(mkc, mkc, lw, !!(acc & IB_ACCESS_LOCAL_WRITE));
MLX5_SET(mkc, mkc, lr, 1);
- if ((acc & IB_ACCESS_RELAXED_ORDERING) &&
- pcie_relaxed_ordering_enabled(dev->mdev->pdev)) {
+ if (acc & IB_ACCESS_RELAXED_ORDERING) {
if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
MLX5_SET(mkc, mkc, relaxed_ordering_write, 1);
- if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
+ if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read) &&
+ pcie_relaxed_ordering_enabled(dev->mdev->pdev))
MLX5_SET(mkc, mkc, relaxed_ordering_read, 1);
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/params.c b/drivers/net/ethernet/mellanox/mlx5/core/en/params.c
index a21bd1179477..d840a59aec88 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/params.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/params.c
@@ -867,8 +867,7 @@ static void mlx5e_build_rx_cq_param(struct mlx5_core_dev *mdev,
static u8 rq_end_pad_mode(struct mlx5_core_dev *mdev, struct mlx5e_params *params)
{
bool lro_en = params->packet_merge.type == MLX5E_PACKET_MERGE_LRO;
- bool ro = pcie_relaxed_ordering_enabled(mdev->pdev) &&
- MLX5_CAP_GEN(mdev, relaxed_ordering_write);
+ bool ro = MLX5_CAP_GEN(mdev, relaxed_ordering_write);
return ro && lro_en ?
MLX5_WQ_END_PAD_MODE_NONE : MLX5_WQ_END_PAD_MODE_ALIGN;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_common.c b/drivers/net/ethernet/mellanox/mlx5/core/en_common.c
index 4c9a3210600c..993af4c12d90 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_common.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_common.c
@@ -44,7 +44,7 @@ void mlx5e_mkey_set_relaxed_ordering(struct mlx5_core_dev *mdev, void *mkc)
bool ro_read = MLX5_CAP_GEN(mdev, relaxed_ordering_read);
MLX5_SET(mkc, mkc, relaxed_ordering_read, ro_pci_enable && ro_read);
- MLX5_SET(mkc, mkc, relaxed_ordering_write, ro_pci_enable && ro_write);
+ MLX5_SET(mkc, mkc, relaxed_ordering_write, ro_write);
}
int mlx5e_create_mkey(struct mlx5_core_dev *mdev, u32 pdn, u32 *mkey)
--
2.39.2
