RE: [PATCH v2 5/6] PCI: hv: Add a per-bus mutex state_lock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dexuan Cui <decui@xxxxxxxxxxxxx> Sent: Monday, April 3, 2023 7:06 PM
> 
> In the case of fast device addition/removal, it's possible that
> hv_eject_device_work() can start to run before create_root_hv_pci_bus()
> starts to run; as a result, the pci_get_domain_bus_and_slot() in
> hv_eject_device_work() can return a 'pdev' of NULL, and
> hv_eject_device_work() can remove the 'hpdev', and immediately send a
> message PCI_EJECTION_COMPLETE to the host, and the host immediately
> unassigns the PCI device from the guest; meanwhile,
> create_root_hv_pci_bus() and the PCI device driver can be probing the
> dead PCI device and reporting timeout errors.
> 
> Fix the issue by adding a per-bus mutex 'state_lock' and grabbing the
> mutex before powering on the PCI bus in hv_pci_enter_d0(): when
> hv_eject_device_work() starts to run, it's able to find the 'pdev' and call
> pci_stop_and_remove_bus_device(pdev): if the PCI device driver has
> loaded, the PCI device driver's probe() function is already called in
> create_root_hv_pci_bus() -> pci_bus_add_devices(), and now
> hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able
> to call the PCI device driver's remove() function and remove the device
> reliably; if the PCI device driver hasn't loaded yet, the function call
> hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to
> remove the PCI device reliably and the PCI device driver's probe()
> function won't be called; if the PCI device driver's probe() is already
> running (e.g., systemd-udev is loading the PCI device driver), it must
> be holding the per-device lock, and after the probe() finishes and releases
> the lock, hv_eject_device_work() -> pci_stop_and_remove_bus_device() is
> able to proceed to remove the device reliably.
> 
> Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
> Signed-off-by: Dexuan Cui <decui@xxxxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> ---
> 
> v2:
>   Removed the "debug code".
>   Fixed the "goto out" in hv_pci_resume() [Michael Kelley]
>   Added Cc:stable
> 
>  drivers/pci/controller/pci-hyperv.c | 29 ++++++++++++++++++++++++++---
>  1 file changed, 26 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index 48feab095a144..3ae2f99dea8c2 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -489,7 +489,10 @@ struct hv_pcibus_device {
>  	struct fwnode_handle *fwnode;
>  	/* Protocol version negotiated with the host */
>  	enum pci_protocol_version_t protocol_version;
> +
> +	struct mutex state_lock;
>  	enum hv_pcibus_state state;
> +
>  	struct hv_device *hdev;
>  	resource_size_t low_mmio_space;
>  	resource_size_t high_mmio_space;
> @@ -2512,6 +2515,8 @@ static void pci_devices_present_work(struct work_struct *work)
>  	if (!dr)
>  		return;
> 
> +	mutex_lock(&hbus->state_lock);
> +
>  	/* First, mark all existing children as reported missing. */
>  	spin_lock_irqsave(&hbus->device_list_lock, flags);
>  	list_for_each_entry(hpdev, &hbus->children, list_entry) {
> @@ -2593,6 +2598,8 @@ static void pci_devices_present_work(struct work_struct *work)
>  		break;
>  	}
> 
> +	mutex_unlock(&hbus->state_lock);
> +
>  	kfree(dr);
>  }
> 
> @@ -2741,6 +2748,8 @@ static void hv_eject_device_work(struct work_struct *work)
>  	hpdev = container_of(work, struct hv_pci_dev, wrk);
>  	hbus = hpdev->hbus;
> 
> +	mutex_lock(&hbus->state_lock);
> +
>  	/*
>  	 * Ejection can come before or after the PCI bus has been set up, so
>  	 * attempt to find it and tear down the bus state, if it exists.  This
> @@ -2777,6 +2786,8 @@ static void hv_eject_device_work(struct work_struct *work)
>  	put_pcichild(hpdev);
>  	put_pcichild(hpdev);
>  	/* hpdev has been freed. Do not use it any more. */
> +
> +	mutex_unlock(&hbus->state_lock);
>  }
> 
>  /**
> @@ -3562,6 +3573,7 @@ static int hv_pci_probe(struct hv_device *hdev,
>  		return -ENOMEM;
> 
>  	hbus->bridge = bridge;
> +	mutex_init(&hbus->state_lock);
>  	hbus->state = hv_pcibus_init;
>  	hbus->wslot_res_allocated = -1;
> 
> @@ -3670,9 +3682,11 @@ static int hv_pci_probe(struct hv_device *hdev,
>  	if (ret)
>  		goto free_irq_domain;
> 
> +	mutex_lock(&hbus->state_lock);
> +
>  	ret = hv_pci_enter_d0(hdev);
>  	if (ret)
> -		goto free_irq_domain;
> +		goto release_state_lock;
> 
>  	ret = hv_pci_allocate_bridge_windows(hbus);
>  	if (ret)
> @@ -3690,12 +3704,15 @@ static int hv_pci_probe(struct hv_device *hdev,
>  	if (ret)
>  		goto free_windows;
> 
> +	mutex_unlock(&hbus->state_lock);
>  	return 0;
> 
>  free_windows:
>  	hv_pci_free_bridge_windows(hbus);
>  exit_d0:
>  	(void) hv_pci_bus_exit(hdev, true);
> +release_state_lock:
> +	mutex_unlock(&hbus->state_lock);
>  free_irq_domain:
>  	irq_domain_remove(hbus->irq_domain);
>  free_fwnode:
> @@ -3945,20 +3962,26 @@ static int hv_pci_resume(struct hv_device *hdev)
>  	if (ret)
>  		goto out;
> 
> +	mutex_lock(&hbus->state_lock);
> +
>  	ret = hv_pci_enter_d0(hdev);
>  	if (ret)
> -		goto out;
> +		goto release_state_lock;
> 
>  	ret = hv_send_resources_allocated(hdev);
>  	if (ret)
> -		goto out;
> +		goto release_state_lock;
> 
>  	prepopulate_bars(hbus);
> 
>  	hv_pci_restore_msi_state(hbus);
> 
>  	hbus->state = hv_pcibus_installed;
> +	mutex_unlock(&hbus->state_lock);
>  	return 0;
> +
> +release_state_lock:
> +	mutex_unlock(&hbus->state_lock);
>  out:
>  	vmbus_close(hdev->channel);
>  	return ret;
> --
> 2.25.1

Reviewed-by: Michael Kelley <mikelley@xxxxxxxxxxxxx>





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux