From: Chris Mi <cmi@xxxxxxxxxx>
When accessing Ports Performance Counters Register (PPCNT),
local port must be one if it is Function-Per-Port HCA that
HCA_CAP.num_ports is 1.
The offending patch can change the local port to other values
when accessing PPCNT after enabling switchdev mode. The following
syndrome will be printed:
# cat /sys/class/infiniband/rdmap4s0f0/ports/2/counters/*
# dmesg
mlx5_core 0000:04:00.0: mlx5_cmd_check:756:(pid 12450): ACCESS_REG(0x805) op_mod(0x1) failed, status bad parameter(0x3), syndrome (0x1e5585)
Fix it by setting local port to one for Function-Per-Port HCA.
Fixes: 210b1f78076f ("IB/mlx5: When not in dual port RoCE mode, use provided port as native")
Reviewed-by: Mark Bloch <mbloch@xxxxxxxxxx>
Signed-off-by: Chris Mi <cmi@xxxxxxxxxx>
Signed-off-by: Leon Romanovsky <leonro@xxxxxxxxxx>
---
drivers/infiniband/hw/mlx5/mad.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c
index 293ed709e5ed..b4dc52392275 100644
--- a/drivers/infiniband/hw/mlx5/mad.c
+++ b/drivers/infiniband/hw/mlx5/mad.c
@@ -166,6 +166,12 @@ static int process_pma_cmd(struct mlx5_ib_dev *dev, u32 port_num,
mdev = dev->mdev;
mdev_port_num = 1;
}
+ if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1) {
+ /* set local port to one for Function-Per-Port HCA. */
+ mdev = dev->mdev;
+ mdev_port_num = 1;
+ }
+
/* Declaring support of extended counters */
if (in_mad->mad_hdr.attr_id == IB_PMA_CLASS_PORT_INFO) {
struct ib_class_port_info cpi = {};
--
2.37.2
