From: Erik Ekman <erik@xxxxxxx>
[ Upstream commit 2191b1dfef7d45f44b5008d2148676d9f2c82874 ]
When link modes were initially added in commit 2c762679435dc
("net/mlx4_en: Use PTYS register to query ethtool settings") and
later updated for the new ethtool API in commit 3d8f7cc78d0eb
("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT
link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR.
It looks like these got picked to represent other modes since nothing
better was available.
Switch to using more specific link modes added in commit 5711a98221443
("net: ethtool: add support for 1000BaseX and missing 10G link modes").
Tested with MCX311A-XCAT connected via DAC.
Before:
% sudo ethtool enp3s0
Settings for enp3s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseKX/Full
10000baseKR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 1000baseKX/Full
10000baseKR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes
With this change:
% sudo ethtool enp3s0
Settings for enp3s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseX/Full
10000baseCR/Full
10000baseSR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 1000baseX/Full
10000baseCR/Full
10000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes
Tested-by: Michael Stapelberg <michael@xxxxxxxxxxxxx>
Signed-off-by: Erik Ekman <erik@xxxxxxx>
Reviewed-by: Tariq Toukan <tariqt@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index 64c4b88de8449..565e1ac241aab 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -649,7 +649,7 @@ void __init mlx4_en_init_ptys2ethtool_map(void)
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_T, SPEED_1000,
ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_CX_SGMII, SPEED_1000,
- ETHTOOL_LINK_MODE_1000baseKX_Full_BIT);
+ ETHTOOL_LINK_MODE_1000baseX_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_1000BASE_KX, SPEED_1000,
ETHTOOL_LINK_MODE_1000baseKX_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_T, SPEED_10000,
@@ -661,9 +661,9 @@ void __init mlx4_en_init_ptys2ethtool_map(void)
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_KR, SPEED_10000,
ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_CR, SPEED_10000,
- ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
+ ETHTOOL_LINK_MODE_10000baseCR_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_10GBASE_SR, SPEED_10000,
- ETHTOOL_LINK_MODE_10000baseKR_Full_BIT);
+ ETHTOOL_LINK_MODE_10000baseSR_Full_BIT);
MLX4_BUILD_PTYS2ETHTOOL_CONFIG(MLX4_20GBASE_KR2, SPEED_20000,
ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT,
ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT);
--
2.33.0
