On Thu, Nov 11, 2021 at 05:25:11PM +0100, Haris Iqbal wrote: > Hi, > > We are experiencing a hang while using RTRS with softROCE and > transitioning the network interface down using ifdown command. > > Steps. > 1) Map an RNBD/RTRS device through softROCE port. > 2) Once mapped, transition the eth interface to down (on which the > softROCE interface was created) using command "ifconfig <ethx> down", > or "ip link set <ethx> down". > 3) The device errors out, and one can see RTRS connection errors in > dmesg. So far so good. > 4) After a while, we see task hung traces in dmesg. > > [ 550.866462] INFO: task kworker/1:2:170 blocked for more than 184 seconds. > [ 550.868820] Tainted: G O 5.10.42-pserver+ #84 > [ 550.869337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" > disables this message. > [ 550.869963] task:kworker/1:2 state:D stack: 0 pid: 170 > ppid: 2 flags:0x00004000 > [ 550.870619] Workqueue: rtrs_server_wq rtrs_srv_close_work [rtrs_server] > [ 550.871134] Call Trace: > [ 550.871375] __schedule+0x421/0x810 > [ 550.871683] schedule+0x46/0xb0 > [ 550.871964] schedule_timeout+0x20e/0x2a0 > [ 550.872300] ? internal_add_timer+0x44/0x70 > [ 550.872650] wait_for_completion+0x86/0xe0 > [ 550.872994] cm_destroy_id+0x18c/0x5a0 [ib_cm] > [ 550.873357] ? _cond_resched+0x15/0x30 > [ 550.873680] ? wait_for_completion+0x33/0xe0 > [ 550.874036] _destroy_id+0x57/0x210 [rdma_cm] > [ 550.874395] rtrs_srv_close_work+0xcc/0x250 [rtrs_server] > [ 550.874819] process_one_work+0x1d4/0x370 > [ 550.875156] worker_thread+0x4a/0x3b0 > [ 550.875471] ? process_one_work+0x370/0x370 > [ 550.875817] kthread+0xfe/0x140 > [ 550.876098] ? kthread_park+0x90/0x90 > [ 550.876453] ret_from_fork+0x1f/0x30 > > > Our observations till now. > > 1) Does not occur if we use "ifdown <ethx>" instead. There is a > difference between the commands, but we are not sure if the above one > should lead to a task hang. > https://access.redhat.com/solutions/27166 > 2) We have verified v5.10 and v.15.1 kernels, and both have this issue. > 3) We tried the same test with NvmeOf target and host over softROCE. > We get the same task hang after doing "ifconfig .. down". > > [Tue Nov 9 14:28:51 2021] INFO: task kworker/1:1:34 blocked for more > than 184 seconds. > [Tue Nov 9 14:28:51 2021] Tainted: G O > 5.10.42-pserver+ #84 > [Tue Nov 9 14:28:51 2021] "echo 0 > > /proc/sys/kernel/hung_task_timeout_secs" disables this message. > [Tue Nov 9 14:28:51 2021] task:kworker/1:1 state:D stack: 0 > pid: 34 ppid: 2 flags:0x00004000 > [Tue Nov 9 14:28:51 2021] Workqueue: events > nvmet_rdma_release_queue_work [nvmet_rdma] > [Tue Nov 9 14:28:51 2021] Call Trace: > [Tue Nov 9 14:28:51 2021] __schedule+0x421/0x810 > [Tue Nov 9 14:28:51 2021] schedule+0x46/0xb0 > [Tue Nov 9 14:28:51 2021] schedule_timeout+0x20e/0x2a0 > [Tue Nov 9 14:28:51 2021] ? internal_add_timer+0x44/0x70 > [Tue Nov 9 14:28:51 2021] wait_for_completion+0x86/0xe0 > [Tue Nov 9 14:28:51 2021] cm_destroy_id+0x18c/0x5a0 [ib_cm] > [Tue Nov 9 14:28:51 2021] ? _cond_resched+0x15/0x30 > [Tue Nov 9 14:28:51 2021] ? wait_for_completion+0x33/0xe0 > [Tue Nov 9 14:28:51 2021] _destroy_id+0x57/0x210 [rdma_cm] > [Tue Nov 9 14:28:51 2021] nvmet_rdma_free_queue+0x2e/0xc0 [nvmet_rdma] > [Tue Nov 9 14:28:51 2021] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] > [Tue Nov 9 14:28:51 2021] process_one_work+0x1d4/0x370 > [Tue Nov 9 14:28:51 2021] worker_thread+0x4a/0x3b0 > [Tue Nov 9 14:28:51 2021] ? process_one_work+0x370/0x370 > [Tue Nov 9 14:28:51 2021] kthread+0xfe/0x140 > [Tue Nov 9 14:28:51 2021] ? kthread_park+0x90/0x90 > [Tue Nov 9 14:28:51 2021] ret_from_fork+0x1f/0x30 > > Is this an known issue with ifconfig or the rxe driver? Thoughts? It doesn't look related to RXE and if to judge by the call trace the issue is one of two: missing call to cm_deref_id() or extra call to refcount_inc(&cm_id_priv->refcount). Both can be related to the callers of rdma-cm interface. For example by not releasing cm_id properly. Thanks > > Regards > -Haris
