Hi, Thanks for your feedback. Please see replies inline. On Sun, Sep 05, 2021 at 04:39:41PM +0300, Roi Dayan wrote: > > > On 2021-08-31 11:44 AM, Abhiram R N wrote: > > As multiple places EOPNOTSUPP and EINVAL is returned from driver > > it becomes difficult to understand the reason only with error code. > > With the netlink extack message exact reason will be known and will > > aid in debugging. > > > > Signed-off-by: Abhiram R N <abhiramrn@xxxxxxxxx> > > --- > > .../net/ethernet/mellanox/mlx5/core/en_tc.c | 106 +++++++++++++----- > > 1 file changed, 76 insertions(+), 30 deletions(-) > > > > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c > > index d273758255c3..911eab2acaad 100644 > > --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c > > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c > > @@ -1894,8 +1894,10 @@ static int parse_tunnel_attr(struct mlx5e_priv *priv, > > bool needs_mapping, sets_mapping; > > int err; > > - if (!mlx5e_is_eswitch_flow(flow)) > > + if (!mlx5e_is_eswitch_flow(flow)) { > > + NL_SET_ERR_MSG_MOD(extack, "Match on tunnel is not supported"); > > return -EOPNOTSUPP; > > + } > > needs_mapping = !!flow->attr->chain; > > sets_mapping = !flow->attr->chain && flow_has_tc_fwd_action(f); > > @@ -2267,8 +2269,10 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, > > addr_type = match.key->addr_type; > > /* the HW doesn't support frag first/later */ > > - if (match.mask->flags & FLOW_DIS_FIRST_FRAG) > > + if (match.mask->flags & FLOW_DIS_FIRST_FRAG) { > > + NL_SET_ERR_MSG_MOD(extack, "Match on frag first/later is not supported"); > > return -EOPNOTSUPP; > > + } > > if (match.mask->flags & FLOW_DIS_IS_FRAGMENT) { > > MLX5_SET(fte_match_set_lyr_2_4, headers_c, frag, 1); > > @@ -2435,8 +2439,11 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, > > switch (ip_proto) { > > case IPPROTO_ICMP: > > if (!(MLX5_CAP_GEN(priv->mdev, flex_parser_protocols) & > > - MLX5_FLEX_PROTO_ICMP)) > > + MLX5_FLEX_PROTO_ICMP)) { > > + NL_SET_ERR_MSG_MOD(extack, > > + "Match on Flex protocols for ICMP not supported"); > > can you add "is" as ".. is not supported"? Sure. Will change it. > > > return -EOPNOTSUPP; > > + } > > MLX5_SET(fte_match_set_misc3, misc_c_3, icmp_type, > > match.mask->type); > > MLX5_SET(fte_match_set_misc3, misc_v_3, icmp_type, > > @@ -2448,8 +2455,11 @@ static int __parse_cls_flower(struct mlx5e_priv *priv, > > break; > > case IPPROTO_ICMPV6: > > if (!(MLX5_CAP_GEN(priv->mdev, flex_parser_protocols) & > > - MLX5_FLEX_PROTO_ICMPV6)) > > + MLX5_FLEX_PROTO_ICMPV6)) { > > + NL_SET_ERR_MSG_MOD(extack, > > + "Match on Flex protocols for ICMPV6 not supported"); > > can you add "is" as ".. is not supported"? Sure. will change it. > > also, can you submit this patch to net-next and not net please? > it's not really fixing an issue and will help avoid conflicts with > changes we plan on this file. > thanks Sure. I will submit it to net-next. I checked now and net-next is closed it says (http://vger.kernel.org/~davem/net-next.html). I will wait for it to be open and then submit there. > > > > return -EOPNOTSUPP; > > + } > > MLX5_SET(fte_match_set_misc3, misc_c_3, icmpv6_type, > > match.mask->type); > > MLX5_SET(fte_match_set_misc3, misc_v_3, icmpv6_type, > > @@ -2555,15 +2565,19 @@ static int pedit_header_offsets[] = { > > #define pedit_header(_ph, _htype) ((void *)(_ph) + pedit_header_offsets[_htype]) > > static int set_pedit_val(u8 hdr_type, u32 mask, u32 val, u32 offset, > > - struct pedit_headers_action *hdrs) > > + struct pedit_headers_action *hdrs, > > + struct netlink_ext_ack *extack) > > { > > u32 *curr_pmask, *curr_pval; > > curr_pmask = (u32 *)(pedit_header(&hdrs->masks, hdr_type) + offset); > > curr_pval = (u32 *)(pedit_header(&hdrs->vals, hdr_type) + offset); > > - if (*curr_pmask & mask) /* disallow acting twice on the same location */ > > + if (*curr_pmask & mask) { /* disallow acting twice on the same location */ > > + NL_SET_ERR_MSG_MOD(extack, > > + "curr_pmask and new mask same. Acting twice on same location"); > > goto out_err; > > + } > > *curr_pmask |= mask; > > *curr_pval |= (val & mask); > > @@ -2893,7 +2907,7 @@ parse_pedit_to_modify_hdr(struct mlx5e_priv *priv, > > val = act->mangle.val; > > offset = act->mangle.offset; > > - err = set_pedit_val(htype, ~mask, val, offset, &hdrs[cmd]); > > + err = set_pedit_val(htype, ~mask, val, offset, &hdrs[cmd], extack); > > if (err) > > goto out_err; > > @@ -2913,8 +2927,10 @@ parse_pedit_to_reformat(struct mlx5e_priv *priv, > > u32 mask, val, offset; > > u32 *p; > > - if (act->id != FLOW_ACTION_MANGLE) > > + if (act->id != FLOW_ACTION_MANGLE) { > > + NL_SET_ERR_MSG_MOD(extack, "Unsupported action id"); > > return -EOPNOTSUPP; > > + } > > if (act->mangle.htype != FLOW_ACT_MANGLE_HDR_TYPE_ETH) { > > NL_SET_ERR_MSG_MOD(extack, "Only Ethernet modification is supported"); > > @@ -3363,12 +3379,16 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv, > > u32 action = 0; > > int err, i; > > - if (!flow_action_has_entries(flow_action)) > > + if (!flow_action_has_entries(flow_action)) { > > + NL_SET_ERR_MSG_MOD(extack, "Flow Action doesn't have any entries"); > > return -EINVAL; > > + } > > if (!flow_action_hw_stats_check(flow_action, extack, > > - FLOW_ACTION_HW_STATS_DELAYED_BIT)) > > + FLOW_ACTION_HW_STATS_DELAYED_BIT)) { > > + NL_SET_ERR_MSG_MOD(extack, "Flow Action HW stats check not supported"); > > return -EOPNOTSUPP; > > + } > > nic_attr = attr->nic_attr; > > @@ -3459,7 +3479,8 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv, > > flow_flag_set(flow, CT); > > break; > > default: > > - NL_SET_ERR_MSG_MOD(extack, "The offload action is not supported"); > > + NL_SET_ERR_MSG_MOD(extack, > > + "The offload action is not supported in NIC action"); > > return -EOPNOTSUPP; > > } > > } > > @@ -3514,19 +3535,25 @@ static bool is_merged_eswitch_vfs(struct mlx5e_priv *priv, > > static int parse_tc_vlan_action(struct mlx5e_priv *priv, > > const struct flow_action_entry *act, > > struct mlx5_esw_flow_attr *attr, > > - u32 *action) > > + u32 *action, > > + struct netlink_ext_ack *extack) > > { > > u8 vlan_idx = attr->total_vlan; > > - if (vlan_idx >= MLX5_FS_VLAN_DEPTH) > > + if (vlan_idx >= MLX5_FS_VLAN_DEPTH) { > > + NL_SET_ERR_MSG_MOD(extack, "Total vlans used is greater than supported"); > > return -EOPNOTSUPP; > > + } > > switch (act->id) { > > case FLOW_ACTION_VLAN_POP: > > if (vlan_idx) { > > if (!mlx5_eswitch_vlan_actions_supported(priv->mdev, > > - MLX5_FS_VLAN_DEPTH)) > > + MLX5_FS_VLAN_DEPTH)) { > > + NL_SET_ERR_MSG_MOD(extack, > > + "vlan pop action is not supported"); > > return -EOPNOTSUPP; > > + } > > *action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_POP_2; > > } else { > > @@ -3542,20 +3569,27 @@ static int parse_tc_vlan_action(struct mlx5e_priv *priv, > > if (vlan_idx) { > > if (!mlx5_eswitch_vlan_actions_supported(priv->mdev, > > - MLX5_FS_VLAN_DEPTH)) > > + MLX5_FS_VLAN_DEPTH)) { > > + NL_SET_ERR_MSG_MOD(extack, > > + "vlan push action is not supported for vlan depth > 1"); > > return -EOPNOTSUPP; > > + } > > *action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH_2; > > } else { > > if (!mlx5_eswitch_vlan_actions_supported(priv->mdev, 1) && > > (act->vlan.proto != htons(ETH_P_8021Q) || > > - act->vlan.prio)) > > + act->vlan.prio)) { > > + NL_SET_ERR_MSG_MOD(extack, > > + "vlan push action is not supported"); > > return -EOPNOTSUPP; > > + } > > *action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH; > > } > > break; > > default: > > + NL_SET_ERR_MSG_MOD(extack, "Unexpected action id for VLAN"); > > return -EINVAL; > > } > > @@ -3589,7 +3623,8 @@ static struct net_device *get_fdb_out_dev(struct net_device *uplink_dev, > > static int add_vlan_push_action(struct mlx5e_priv *priv, > > struct mlx5_flow_attr *attr, > > struct net_device **out_dev, > > - u32 *action) > > + u32 *action, > > + struct netlink_ext_ack *extack) > > { > > struct net_device *vlan_dev = *out_dev; > > struct flow_action_entry vlan_act = { > > @@ -3600,7 +3635,7 @@ static int add_vlan_push_action(struct mlx5e_priv *priv, > > }; > > int err; > > - err = parse_tc_vlan_action(priv, &vlan_act, attr->esw_attr, action); > > + err = parse_tc_vlan_action(priv, &vlan_act, attr->esw_attr, action, extack); > > if (err) > > return err; > > @@ -3611,14 +3646,15 @@ static int add_vlan_push_action(struct mlx5e_priv *priv, > > return -ENODEV; > > if (is_vlan_dev(*out_dev)) > > - err = add_vlan_push_action(priv, attr, out_dev, action); > > + err = add_vlan_push_action(priv, attr, out_dev, action, extack); > > return err; > > } > > static int add_vlan_pop_action(struct mlx5e_priv *priv, > > struct mlx5_flow_attr *attr, > > - u32 *action) > > + u32 *action, > > + struct netlink_ext_ack *extack) > > { > > struct flow_action_entry vlan_act = { > > .id = FLOW_ACTION_VLAN_POP, > > @@ -3628,7 +3664,7 @@ static int add_vlan_pop_action(struct mlx5e_priv *priv, > > nest_level = attr->parse_attr->filter_dev->lower_level - > > priv->netdev->lower_level; > > while (nest_level--) { > > - err = parse_tc_vlan_action(priv, &vlan_act, attr->esw_attr, action); > > + err = parse_tc_vlan_action(priv, &vlan_act, attr->esw_attr, action, extack); > > if (err) > > return err; > > } > > @@ -3751,12 +3787,16 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, > > int err, i, if_count = 0; > > bool mpls_push = false; > > - if (!flow_action_has_entries(flow_action)) > > + if (!flow_action_has_entries(flow_action)) { > > + NL_SET_ERR_MSG_MOD(extack, "Flow action doesn't have any entries"); > > return -EINVAL; > > + } > > if (!flow_action_hw_stats_check(flow_action, extack, > > - FLOW_ACTION_HW_STATS_DELAYED_BIT)) > > + FLOW_ACTION_HW_STATS_DELAYED_BIT)) { > > + NL_SET_ERR_MSG_MOD(extack, "Flow Action HW stats check is not supported"); > > return -EOPNOTSUPP; > > + } > > esw_attr = attr->esw_attr; > > parse_attr = attr->parse_attr; > > @@ -3900,14 +3940,14 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, > > if (is_vlan_dev(out_dev)) { > > err = add_vlan_push_action(priv, attr, > > &out_dev, > > - &action); > > + &action, extack); > > if (err) > > return err; > > } > > if (is_vlan_dev(parse_attr->filter_dev)) { > > err = add_vlan_pop_action(priv, attr, > > - &action); > > + &action, extack); > > if (err) > > return err; > > } > > @@ -3953,10 +3993,13 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, > > break; > > case FLOW_ACTION_TUNNEL_ENCAP: > > info = act->tunnel; > > - if (info) > > + if (info) { > > encap = true; > > - else > > + } else { > > + NL_SET_ERR_MSG_MOD(extack, > > + "Zero tunnel attributes is not supported"); > > return -EOPNOTSUPP; > > + } > > break; > > case FLOW_ACTION_VLAN_PUSH: > > @@ -3970,7 +4013,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, > > act, parse_attr, hdrs, > > &action, extack); > > } else { > > - err = parse_tc_vlan_action(priv, act, esw_attr, &action); > > + err = parse_tc_vlan_action(priv, act, esw_attr, &action, extack); > > } > > if (err) > > return err; > > @@ -4023,7 +4066,8 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, > > flow_flag_set(flow, SAMPLE); > > break; > > default: > > - NL_SET_ERR_MSG_MOD(extack, "The offload action is not supported"); > > + NL_SET_ERR_MSG_MOD(extack, > > + "The offload action is not supported in FDB action"); > > return -EOPNOTSUPP; > > } > > } > > @@ -4731,8 +4775,10 @@ static int scan_tc_matchall_fdb_actions(struct mlx5e_priv *priv, > > return -EOPNOTSUPP; > > } > > - if (!flow_action_basic_hw_stats_check(flow_action, extack)) > > + if (!flow_action_basic_hw_stats_check(flow_action, extack)) { > > + NL_SET_ERR_MSG_MOD(extack, "Flow Action HW stats check is not supported"); > > return -EOPNOTSUPP; > > + } > > flow_action_for_each(i, act, flow_action) { > > switch (act->id) { > > Thanks & Regards, Abhiram R N