On Fri, Aug 06, 2021 at 12:58:08PM -0500, Tatyana Nikolova wrote:
> Add ice and irdma to kernel-boot rules so that
> these devices are recognized as iWARP and RoCE capable.
>
> Otherwise the port mapper service which is only relevant
> for iWARP devices may not start automatically after boot.
>
> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@xxxxxxxxx>
> kernel-boot/rdma-description.rules | 2 ++
> kernel-boot/rdma-hw-modules.rules | 1 +
> 2 files changed, 3 insertions(+)
>
> diff --git a/kernel-boot/rdma-description.rules b/kernel-boot/rdma-description.rules
> index 48a7ced..f2f7b38 100644
> +++ b/kernel-boot/rdma-description.rules
> @@ -24,11 +24,13 @@ DRIVERS=="hfi1", ENV{ID_RDMA_OPA}="1"
> # Hardware that supports iWarp
> DRIVERS=="cxgb4", ENV{ID_RDMA_IWARP}="1"
> DRIVERS=="i40e", ENV{ID_RDMA_IWARP}="1"
> +DRIVERS=="ice", ENV{ID_RDMA_IWARP}="1"
>
> # Hardware that supports RoCE
> DRIVERS=="be2net", ENV{ID_RDMA_ROCE}="1"
> DRIVERS=="bnxt_en", ENV{ID_RDMA_ROCE}="1"
> DRIVERS=="hns", ENV{ID_RDMA_ROCE}="1"
> +DRIVERS=="ice", ENV{ID_RDMA_ROCE}="1"
> DRIVERS=="mlx4_core", ENV{ID_RDMA_ROCE}="1"
> DRIVERS=="mlx5_core", ENV{ID_RDMA_ROCE}="1"
> DRIVERS=="qede", ENV{ID_RDMA_ROCE}="1"
> diff --git a/kernel-boot/rdma-hw-modules.rules b/kernel-boot/rdma-hw-modules.rules
> index 95eaf72..040deb3 100644
> +++ b/kernel-boot/rdma-hw-modules.rules
> @@ -12,6 +12,7 @@ ENV{ID_NET_DRIVER}=="bnxt_en", RUN{builtin}+="kmod load bnxt_re"
> ENV{ID_NET_DRIVER}=="cxgb4", RUN{builtin}+="kmod load iw_cxgb4"
> ENV{ID_NET_DRIVER}=="hns", RUN{builtin}+="kmod load hns_roce"
> ENV{ID_NET_DRIVER}=="i40e", RUN{builtin}+="kmod load i40iw"
> +ENV{ID_NET_DRIVER}=="ice", RUN{builtin}+="kmod load irdma"
This should not be needed, right? The auxbux stuff triggers
proper module autoloading?
Jason
