Re: [PATCH v2 1/1] RDMA/rxe: Bump up default maximum values used via uverbs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Your urls are garbled, so I can not make any sense out of them.

[root@ca-dev141 linux]# git remote --v
origin https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git (fetch) origin https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git (push)

[root@ca-dev141 linux]# git show 8c1b4316c3fa
fatal: ambiguous argument '8c1b4316c3fa': unknown revision or path not in the working tree.

[root@ca-dev141 linux]# git log --grep='RDMA/efa: Split hardware'
[root@ca-dev141 linux]#

[root@ca-dev141 linux]# git describe
v5.14-rc1-17-gc06676b5953b

You need to do a little bit more work on your end and tell me which value rxe is complaining about. Also provide a kernel version that you are using as I have provided above.

Shoaib

On 7/18/21 12:59 AM, Zhu Yanjun wrote:
On Sat, Jul 17, 2021 at 2:09 AM Shoaib Rao <rao.shoaib@xxxxxxxxxx> wrote:

On 7/15/21 9:07 PM, Zhu Yanjun wrote:

On Fri, Jul 16, 2021 at 12:44 AM Shoaib Rao <rao.shoaib@xxxxxxxxxx> wrote:

Following is a link

https://urldefense.com/v3/__https://marc.info/?l=linux-rdma&m=162395437604846&w=2__;!!ACWV5N9M2RV99hQ!f9TPWtgUxambtSeQ_L3h-IH7CW3SifyiumB3kjc2v_w6Ec_WYVtjWyusEtgQ60iw$

Or just search for my name in the archive.

Do you see any issues with this value?

After this commit is applied, I confronted the following problem
"
[  639.943561] rdma_rxe: unloaded
[  679.717143] rdma_rxe: loaded
[  691.721055] rdma_rxe: not enough indices for max_elem
"
Not sure if this problem is introduced by this commit. Please help to
check this problem.
Thanks a lot.

Zhu Yanjun

I do not see the issue.

[root@ca-dev66 rxe]# lsmod | grep rdma_rxe
rdma_rxe              126976  0
ip6_udp_tunnel         16384  1 rdma_rxe
udp_tunnel             20480  1 rdma_rxe
ib_uverbs             147456  3 rdma_rxe,rdma_ucm,mlx5_ib
ib_core               364544  10 rdma_cm,ib_ipoib,rdma_rxe,rds_rdma,iw_cm,ib_umad,rdma_ucm,ib_uverbs,mlx5_ib,ib_cm

I am using gdb to dump the values

(gdb) ptype RXE_MAX_INLINE_DATA
type = enum rxe_device_param {RXE_MAX_MR_SIZE = -1,
     RXE_PAGE_SIZE_CAP = 4294963200, RXE_MAX_QP_WR = 1048576,
     RXE_DEVICE_CAP_FLAGS = 137466362998, RXE_MAX_SGE = 32,
     RXE_MAX_WQE_SIZE = 720, RXE_MAX_INLINE_DATA = 512, RXE_MAX_SGE_RD = 32,
     RXE_MAX_CQ = 1048576, RXE_MAX_LOG_CQE = 15, RXE_MAX_PD = 1048576,
     RXE_MAX_QP_RD_ATOM = 128, RXE_MAX_RES_RD_ATOM = 258048,
     RXE_MAX_QP_INIT_RD_ATOM = 128, RXE_MAX_MCAST_GRP = 8192,
     RXE_MAX_MCAST_QP_ATTACH = 56, RXE_MAX_TOT_MCAST_QP_ATTACH = 458752,
     RXE_MAX_AH = 1048576, RXE_MAX_SRQ_WR = 1048576, RXE_MIN_SRQ_WR = 1,
     RXE_MAX_SRQ_SGE = 27, RXE_MIN_SRQ_SGE = 1,
     RXE_MAX_FMR_PAGE_LIST_LEN = 512, RXE_MAX_PKEYS = 64,
     RXE_LOCAL_CA_ACK_DELAY = 15, RXE_MAX_UCONTEXT = 1048576, RXE_NUM_PORT = 1,
     RXE_MAX_QP = 1048576, RXE_MIN_QP_INDEX = 16, RXE_MAX_QP_INDEX = 262144,
     RXE_MAX_SRQ = 1048576, RXE_MIN_SRQ_INDEX = 131073,
     RXE_MAX_SRQ_INDEX = 262144, RXE_MAX_MR = 1048576, RXE_MAX_MW = 4096,
     RXE_MIN_MR_INDEX = 1, RXE_MAX_MR_INDEX = 262144, RXE_MIN_MW_INDEX = 65537,
     RXE_MAX_MW_INDEX = 131072, RXE_MAX_PKT_PER_ACK = 64,
     RXE_MAX_UNACKED_PSNS = 128, RXE_INFLIGHT_SKBS_PER_QP_HIGH = 64,
     RXE_INFLIGHT_SKBS_PER_QP_LOW = 16, RXE_NSEC_ARB_TIMER_DELAY = 200,
     RXE_VENDOR_ID = 16777215}

It is possible that you are changing some values.

I git clone the source code from
https://urldefense.com/v3/__https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git__;!!ACWV5N9M2RV99hQ!efPsL9fikzm6Ob1-zsmbsAzPkfqRpxYkp9oJXF9csPOJgoei9njj8RmA5IyuH447$  again.
And the first 3 commits are as below. One is your commit.
"
6163ad3208c8 (HEAD -> for-next) RDMA/rxe: Bump up default maximum
values used via uverbs
8c1b4316c3fa (origin/for-next, origin/HEAD) RDMA/efa: Split hardware
stats to device and port stats
916071185b17 MAINTAINERS: Update maintainers of HiSilicon RoCE
"

And when I tried to add a new rxe0,
"
error: Invalid argument
"
And the dmesg logs are as below:

# dmesg
"
[   70.782302] e1000: enp0s8 NIC Link is Up 1000 Mbps Full Duplex,
Flow Control: RX
[   70.782744] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s8: link becomes ready
[   79.467652] rdma_rxe: loaded
[   79.468348] rdma_rxe: not enough indices for max_elem
[   79.468356] rdma_rxe: failed to add enp0s8
"

Please follow my steps to reproduce this problem again.

Zhu Yanjun

Shoaib

Shoaib

On 7/14/21 10:02 PM, Zhu Yanjun wrote:

On Wed, Jul 14, 2021 at 4:36 PM Rao Shoaib <Rao.Shoaib@xxxxxxxxxx> wrote:

From: Rao Shoaib <rshoaib@xxxxxxxxxxxxxxxxxxxxxxx>

In our internal testing we have found that the
current maximum are too smalls. Ideally there should
be no limits but currently maximum values are reported
via ibv_query_device, so we have to keep maximum values
but they have been made suffiently large.

Resubmitting after fixing an issue reported by test robot.

Reported-by: kernel test robot <lkp@xxxxxxxxx>

Signed-off-by: Rao Shoaib <rshoaib@xxxxxxxxxxxxxxxxxxxxxxx>
---
   drivers/infiniband/sw/rxe/rxe_param.h | 26 ++++++++++++++------------
   1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_param.h b/drivers/infiniband/sw/rxe/rxe_param.h
index 742e6ec93686..092dbff890f2 100644
--- a/drivers/infiniband/sw/rxe/rxe_param.h
+++ b/drivers/infiniband/sw/rxe/rxe_param.h
@@ -9,6 +9,8 @@

   #include <uapi/rdma/rdma_user_rxe.h>

+#define DEFAULT_MAX_VALUE (1 << 20)

Can you let me know the link in which the above value is discussed?

Thanks,
Zhu Yanjun

+
   static inline enum ib_mtu rxe_mtu_int_to_enum(int mtu)
   {
          if (mtu < 256)
@@ -37,7 +39,7 @@ static inline enum ib_mtu eth_mtu_int_to_enum(int mtu)
   enum rxe_device_param {
          RXE_MAX_MR_SIZE                 = -1ull,
          RXE_PAGE_SIZE_CAP               = 0xfffff000,
-       RXE_MAX_QP_WR                   = 0x4000,
+       RXE_MAX_QP_WR                   = DEFAULT_MAX_VALUE,
          RXE_DEVICE_CAP_FLAGS            = IB_DEVICE_BAD_PKEY_CNTR
                                          | IB_DEVICE_BAD_QKEY_CNTR
                                          | IB_DEVICE_AUTO_PATH_MIG
@@ -58,40 +60,40 @@ enum rxe_device_param {
          RXE_MAX_INLINE_DATA             = RXE_MAX_WQE_SIZE -
                                            sizeof(struct rxe_send_wqe),
          RXE_MAX_SGE_RD                  = 32,
-       RXE_MAX_CQ                      = 16384,
+       RXE_MAX_CQ                      = DEFAULT_MAX_VALUE,
          RXE_MAX_LOG_CQE                 = 15,
-       RXE_MAX_PD                      = 0x7ffc,
+       RXE_MAX_PD                      = DEFAULT_MAX_VALUE,
          RXE_MAX_QP_RD_ATOM              = 128,
          RXE_MAX_RES_RD_ATOM             = 0x3f000,
          RXE_MAX_QP_INIT_RD_ATOM         = 128,
          RXE_MAX_MCAST_GRP               = 8192,
          RXE_MAX_MCAST_QP_ATTACH         = 56,
          RXE_MAX_TOT_MCAST_QP_ATTACH     = 0x70000,
-       RXE_MAX_AH                      = 100,
-       RXE_MAX_SRQ_WR                  = 0x4000,
+       RXE_MAX_AH                      = DEFAULT_MAX_VALUE,
+       RXE_MAX_SRQ_WR                  = DEFAULT_MAX_VALUE,
          RXE_MIN_SRQ_WR                  = 1,
          RXE_MAX_SRQ_SGE                 = 27,
          RXE_MIN_SRQ_SGE                 = 1,
          RXE_MAX_FMR_PAGE_LIST_LEN       = 512,
-       RXE_MAX_PKEYS                   = 1,
+       RXE_MAX_PKEYS                   = 64,
          RXE_LOCAL_CA_ACK_DELAY          = 15,

-       RXE_MAX_UCONTEXT                = 512,
+       RXE_MAX_UCONTEXT                = DEFAULT_MAX_VALUE,

          RXE_NUM_PORT                    = 1,

-       RXE_MAX_QP                      = 0x10000,
+       RXE_MAX_QP                      = DEFAULT_MAX_VALUE,
          RXE_MIN_QP_INDEX                = 16,
-       RXE_MAX_QP_INDEX                = 0x00020000,
+       RXE_MAX_QP_INDEX                = 0x00040000,

-       RXE_MAX_SRQ                     = 0x00001000,
+       RXE_MAX_SRQ                     = DEFAULT_MAX_VALUE,
          RXE_MIN_SRQ_INDEX               = 0x00020001,
          RXE_MAX_SRQ_INDEX               = 0x00040000,

-       RXE_MAX_MR                      = 0x00001000,
+       RXE_MAX_MR                      = DEFAULT_MAX_VALUE,
          RXE_MAX_MW                      = 0x00001000,
          RXE_MIN_MR_INDEX                = 0x00000001,
-       RXE_MAX_MR_INDEX                = 0x00010000,
+       RXE_MAX_MR_INDEX                = 0x00040000,
          RXE_MIN_MW_INDEX                = 0x00010001,
          RXE_MAX_MW_INDEX                = 0x00020000,

--
2.27.0




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux