[PATCH mlx5-next 1/2] IB/mlx5: Set right RoCE l3 type and roce version while deleting GID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Parav Pandit <parav@xxxxxxxxxx>

Currently when GID is deleted, it zero out all the fields of the RoCE
address in the SET_ROCE_ADDRESS command for a specified index.

roce_version = 0 means RoCEv1 in the SET_ROCE_ADDRESS command.

This assumes that device has RoCEv1 always enabled which is not always
correct. For example Subfunction does not support RoCEv1.

Due to this assumption a previously added RoCEv2 GID is always deleted as
RoCEv1 GID. This results in a below syndrome.

mlx5_core.sf mlx5_core.sf.4: mlx5_cmd_check:777:(pid 4256): SET_ROCE_ADDRESS(0x761) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x12822d)

Hence set the right RoCE version during GID deletion provided by the
core.

Signed-off-by: Parav Pandit <parav@xxxxxxxxxx>
Signed-off-by: Leon Romanovsky <leonro@xxxxxxxxxx>
---
 drivers/infiniband/hw/mlx5/main.c                 | 8 ++++----
 drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index 7ea6137f8d12..6d1dd09a4388 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -555,15 +555,15 @@ static int set_roce_addr(struct mlx5_ib_dev *dev, u32 port_num,
 			 unsigned int index, const union ib_gid *gid,
 			 const struct ib_gid_attr *attr)
 {
-	enum ib_gid_type gid_type = IB_GID_TYPE_ROCE;
+	enum ib_gid_type gid_type;
 	u16 vlan_id = 0xffff;
 	u8 roce_version = 0;
 	u8 roce_l3_type = 0;
 	u8 mac[ETH_ALEN];
 	int ret;
 
+	gid_type = attr->gid_type;
 	if (gid) {
-		gid_type = attr->gid_type;
 		ret = rdma_read_gid_l2_fields(attr, &vlan_id, &mac[0]);
 		if (ret)
 			return ret;
@@ -575,7 +575,7 @@ static int set_roce_addr(struct mlx5_ib_dev *dev, u32 port_num,
 		break;
 	case IB_GID_TYPE_ROCE_UDP_ENCAP:
 		roce_version = MLX5_ROCE_VERSION_2;
-		if (ipv6_addr_v4mapped((void *)gid))
+		if (gid && ipv6_addr_v4mapped((void *)gid))
 			roce_l3_type = MLX5_ROCE_L3_TYPE_IPV4;
 		else
 			roce_l3_type = MLX5_ROCE_L3_TYPE_IPV6;
@@ -602,7 +602,7 @@ static int mlx5_ib_del_gid(const struct ib_gid_attr *attr,
 			   __always_unused void **context)
 {
 	return set_roce_addr(to_mdev(attr->device), attr->port_num,
-			     attr->index, NULL, NULL);
+			     attr->index, NULL, attr);
 }
 
 __be16 mlx5_get_roce_udp_sport_min(const struct mlx5_ib_dev *dev,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c
index a68738c8f4bc..215fa8bdce48 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/gid.c
@@ -142,10 +142,10 @@ int mlx5_core_roce_gid_set(struct mlx5_core_dev *dev, unsigned int index,
 		}
 
 		ether_addr_copy(addr_mac, mac);
-		MLX5_SET_RA(in_addr, roce_version, roce_version);
-		MLX5_SET_RA(in_addr, roce_l3_type, roce_l3_type);
 		memcpy(addr_l3_addr, gid, gidsz);
 	}
+	MLX5_SET_RA(in_addr, roce_version, roce_version);
+	MLX5_SET_RA(in_addr, roce_l3_type, roce_l3_type);
 
 	if (MLX5_CAP_GEN(dev, num_vhca_ports) > 0)
 		MLX5_SET(set_roce_address_in, in, vhca_port_num, port_num);
-- 
2.30.2




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux