From: Matteo Croce <mcroce@xxxxxxxxxxxxx> Use the new recycling API for page_pool. In a drop rate test, the packet rate increased di 10%, from 269 Kpps to 296 Kpps. perf top on a stock system shows: Overhead Shared Object Symbol 21.78% [kernel] [k] __pi___inval_dcache_area 21.66% [mvneta] [k] mvneta_rx_swbm 7.00% [kernel] [k] kmem_cache_alloc 6.05% [kernel] [k] eth_type_trans 4.44% [kernel] [k] kmem_cache_free.part.0 3.80% [kernel] [k] __netif_receive_skb_core 3.68% [kernel] [k] dev_gro_receive 3.65% [kernel] [k] get_page_from_freelist 3.43% [kernel] [k] page_pool_release_page 3.35% [kernel] [k] free_unref_page And this is the same output with recycling enabled: Overhead Shared Object Symbol 24.10% [kernel] [k] __pi___inval_dcache_area 23.02% [mvneta] [k] mvneta_rx_swbm 7.19% [kernel] [k] kmem_cache_alloc 6.50% [kernel] [k] eth_type_trans 4.93% [kernel] [k] __netif_receive_skb_core 4.77% [kernel] [k] kmem_cache_free.part.0 3.93% [kernel] [k] dev_gro_receive 3.03% [kernel] [k] build_skb 2.91% [kernel] [k] page_pool_put_page 2.85% [kernel] [k] __xdp_return The test was done with mausezahn on the TX side with 64 byte raw ethernet frames. Signed-off-by: Matteo Croce <mcroce@xxxxxxxxxxxxx> --- drivers/net/ethernet/marvell/mvneta.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index f20dfd1d7a6b..f88c189b60a4 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2331,7 +2331,7 @@ mvneta_swbm_build_skb(struct mvneta_port *pp, struct mvneta_rx_queue *rxq, if (!skb) return ERR_PTR(-ENOMEM); - page_pool_release_page(rxq->page_pool, virt_to_page(xdp->data)); + skb_mark_for_recycle(skb, virt_to_page(xdp->data), &xdp->rxq->mem); skb_reserve(skb, xdp->data - xdp->data_hard_start); skb_put(skb, xdp->data_end - xdp->data); @@ -2343,7 +2343,10 @@ mvneta_swbm_build_skb(struct mvneta_port *pp, struct mvneta_rx_queue *rxq, skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, skb_frag_page(frag), skb_frag_off(frag), skb_frag_size(frag), PAGE_SIZE); - page_pool_release_page(rxq->page_pool, skb_frag_page(frag)); + /* We don't need to reset pp_recycle here. It's already set, so + * just mark fragments for recycling. + */ + page_pool_store_mem_info(skb_frag_page(frag), &xdp->rxq->mem); } return skb; -- 2.30.2
