Re: [PATCH mlx5-next v7 0/4] Dynamically assign MSI-X vectors count

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 12, 2021 at 05:50:34AM +0900, Keith Busch wrote:
> On Thu, Mar 11, 2021 at 04:22:34PM -0400, Jason Gunthorpe wrote:
> > On Thu, Mar 11, 2021 at 12:16:02PM -0700, Keith Busch wrote:
> > > On Thu, Mar 11, 2021 at 12:17:29PM -0600, Bjorn Helgaas wrote:
> > > > On Wed, Mar 10, 2021 at 03:34:01PM -0800, Alexander Duyck wrote:
> > > > > 
> > > > > I'm not so much worried about management software as the fact that
> > > > > this is a vendor specific implementation detail that is shaping how
> > > > > the kernel interfaces are meant to work. Other than the mlx5 I don't
> > > > > know if there are any other vendors really onboard with this sort of
> > > > > solution.
> > > > 
> > > > I know this is currently vendor-specific, but I thought the value
> > > > proposition of dynamic configuration of VFs for different clients
> > > > sounded compelling enough that other vendors would do something
> > > > similar.  But I'm not an SR-IOV guy and have no vendor insight, so
> > > > maybe that's not the case?
> > > 
> > > NVMe has a similar feature defined by the standard where a PF controller can
> > > dynamically assign MSIx vectors to VFs. The whole thing is managed in user
> > > space with an ioctl, though. I guess we could wire up the driver to handle it
> > > through this sysfs interface too, but I think the protocol specific tooling is
> > > more appropriate for nvme.
> > 
> > Really? Why not share a common uAPI?
> 
> We associate interrupt vectors with other dynamically assigned nvme
> specific resources (IO queues), and these are not always allocated 1:1.

mlx5 is doing that too, the end driver gets to assign the MSI vector
to a CPU and then dynamically attach queues to it.

I'm not sure I get why nvme would want to link those two things as the
CPU assignment and queue attach could happen in a VM while the MSIX
should be in the host?

> A common uAPI for MSIx only gets us half way to configuring the VFs for
> that particular driver.
>
> > Do you have a standards reference for this?
> 
> Yes, sections 5.22 and 8.5 from this spec:
> 
>   https://nvmexpress.org/wp-content/uploads/NVM-Express-1_4a-2020.03.09-Ratified.pdf
> 
> An example of open source tooling implementing this is nvme-cli's
> "nvme virt-mgmt" command.

Oh it is fascinating! 8.5.2 looks like exactly the same thing being
implemented here for mlx5, including changing the "Read only" config
space value

Still confused why this shouldn't be the same API??

Jason



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Photo]     [Yosemite News]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux